APC SUA1000RM1U, Smart UPS 230 V, SUA1000RM2U, Smart UPS 120 V, Smart UPS 208 V User Manual

®

Smart-UPS

Addendum

UPS Rack-Mount Installation

English

990-3567-001 03/2009

Introduction

The APC Uninterruptible Power Supply (UPS) is designed to prevent utility blackouts, brownouts,
sags, and surges from reaching your electronic equipment. The uninterruptible power supply (UPS)
filters small utility line fluctuations and isolates your electronic equipment from large disturbances
by internally disconnecting from the utility line. The UPS provides continuous power from the
internal battery until utility power returns to safe levels or the battery is fully discharged.

Unpacking

Read the Safety Guide before installing the UPS.
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents.

ALL MODELS 100/120 V MODELS 208/230 V MODELS

• UPS

• Front bezel

• Rail Kit

• Brackets

• Hardware

ITEM DESCRIPTION QUANTITY

• Literature kit

• Product

Documentation

• Safety Guide

• Serial Cable

O

RNAMENTAL SCREWS 2

• Literature kit

• Product

Documentation

• Safety Guide

• Serial Cable

• Two IEC Cables

M5 SCREWS

(

FOR USE IN RACKS

WITH SQUARE HOLES)

#8

#8

IEC CABLES 2

SERIAL CABLE 1

1

RAILS

ASHERS

W

BRACKETS

SCREWS

CLEATS

SCREWS

2
8
8

2
4

2
6

INSTALLATION

Install the Rails in the Rack

The UPS fits in a standard 19 inch, (46.5 cm) rack.

2

Mount the UPS in a Rack

The UPS is heavy. To lighten it, you must remove the battery before mounting the unit in the rack,
Steps n and o.

n

p

Be careful-the battery is heavy.

o

q

r

Ensure that both cleats are properly seated in the rail.
Check to ensure the rack will not tip after installing the UPS into the rack.

3

Install and Connect the Battery and Attach the Front Bezel

n

p

o

q

4