APA 16526, POWER PACK „BULLY“ User guide

GB

Art.-Nr. 16526

POWER PACK „BULLY“
1000 Ampere Starthilfe

Bedienungsanleitung

Bitte lesen diese Anleitung vor Inbetriebnahme genau durch und bewahren Sie diese für spätere

1 Netzkabel
2 Polzange (-)
3 Taste Ladestatus

Bezugnahme sorgfältig auf!

4 Ladestatusanzeige
5 12V-Ausgangsbuchsen
6 Polzange (+)

GB

EAL GmbH, Otto-Hausmann-Ring 107, D-42115 Wuppertal

GB

Art. Nr. 16526 POWER PACK „BULLY“ 1000 Ampere Jump Start

Operating instructions

Please read these instructions before starting the Poewr Pack and keep them safely for future reference.

1 Power cable
2 Crocodile clip (-)
3 Button for the charging status

Important advice before starting:

The “Bully” Power Pack contains an internal accumulator which has to be recharged regularly every 4 to
6 weeks, even if the device is not in use. If the LED indicates a low charging level, the device has to be
recharged immediately. The accumulator has already been charged by the manufacturer. Nevertheless
you should recharge the device with the power cable before using it for the first time. This power cable
is constructed in a way that the accumulator of the device cannot be overcharged.

Safety instructions:

The internal accumulator of the “Bully” Power Pack is a lead-acid battery. This battery is classified as
leak proof and uses a unique sealing technology which ensures that the electrolyte cannot leak from the
battery. If it is necessary to replace this battery, you should ask a qualified technician to execute this
replacement. Every standard battery of the same type can be used to replace the internal battery of the
Power Pack (e.g. from Varta, Moll, etc.). It can be dangerous to work near lead-acid batteries, because
this type of battery produces explosive gasses during the process of charging and starting. To reduce
the risk of an explosion, please read carefully the instructions for this device and the safety instructions
provided by the manufacturer of the car battery. Please take note of the manufacturer’s special
instuctions on the battery, as well! Use the “Bully“ Power Pack only for bridging lead-acid batteries. It is

4 LED for the charging status
5 12 Volt output contact
6 Crocodile clip (+)

4