A. O. Smith GREEN CHOICE User Manual

Energy Efcient Motors

for Refrigeration Applications

Breakthrough

41%

27%

62%

Motor Design

• Advanced ECM Design

• Rain Shield

• Cast Iron

• 13” Leads

• Lyall Plug

• UL approved E128044

• Exceeds 60% Efficiency

• Low Temperature Oil

Stock No. Watts Volts Amps RPM ROT OSE

9207 6,9,12 115 .2/.3 1550 CW

Annual KWH Savings For a Typical 9W Motor

Motor Shaded Pole iMotor Annual
Output Watts In Watts In KWH Saved

9 Watts 51.8 17.7 298.7

Savings for the

Offers Huge

Energy

Refrigeration

Market

Direct Drop-in

Replacement for

Supermarket Case

Evaporator Fans

Energy Savings ECM Design

Comparison of 9-Watt Motors @ 1550 RPM

70%

60%

50%

40%

30%

20%

EFFICIENCY PERCENTAGE

10%

0%

iMotor Shaded PolePSC

The iMotor refrigeration motor uses less wattage to
achieve the same airflow as a shaded pole motor,
so it produces less heat. Fewer BTU’s in the system
means less work and wear for the compressor for
even greater savings.

Stock No. 9721

Replaces 1/12, 1/15, 1/20

PSC and Low Efficient

Shaded Pole Designs

• Easy-to-Read Connection Diagram

Attached to White Lead Wire

• Four Studs on Each End

•    40˚C Ambient

• Class B Insulation

• UL and CSA Recognized

• Reversing plug for easy

rotation change

• Low temp (-40˚F)

  Lubrication system

• Extra mounting nuts for

quick installation

• Ball Bearings

Stock No. HP Volts Amps RPM Speeds Frame SF HZ Rotation Wt.

9721 1/12 115/208-230 1.1/0.5 1550 1 3.3” 1.0 60/50 Rev. 4.75

Heatcraft replacement for Bohn, Chandler, Climate Control and Larkin.

Direct Drop-in Replacement for

Walk-In Cooler Evaporator Fans

50% More Efficient than Shaded Pole Motors

60%

50%

40%

30%

20%

10%

0%

Less efficient shaded pole motors are often used in
original equipment to cut costs. While they do allow
some small savings in purchase price, the savings
are quickly eaten up in electric bills at todays high
power costs.

9721 Typical Shaded Pole

JuggerNaut

™

Class F Insulation - 70˚C (158˚F) Max Ambient

Stock No. HP Volts Amps RPM Speeds Frame Size Rotation Type Bearings “C” Dim. Shaft Wt. (lbs)

H1050 1.0 208-230/460 4.0-4.4/2.2 1140 1 56H Reversible Three Phase Ball 16.63 5/8” x 6.0” 29

H1051 1.5 208-230/460 5.8-5.8/2.9 1140 1 56H Reversible Three Phase Ball 17.63 5/8” x 6.0” 38

H1052 2.0 208-230/460 7.0-7.4/3.7 1140 1 56H Reversible Three Phase Ball 18.63 5/8” x 6.0” 45

H1053 1.0 208-230/460 5.0-5.2/2.6 850 1 56H Reversible Three Phase Ball 18.63 5/8” x 6.0” 45

• Inverter duty

• Removable 56H rigid base

• VCM

™

- Voltage Change Module

• 70°C (158˚F) max ambient

• Class F moisture resistant insulation

Features:

• Automatic overload protector

• Large water slinger

• Double sealed ball bearings

• Positioning lugs for easy
belly-band mounting

• Energy-efficient three phase design

• Conductive bearing grease
for inverter applications

• Quick connect design

• Shaft up mounting

Note: It is the responsibility of the installer to properly adjust the drive to the motor for the specific application. The correct volts/Hz settings are application specific and
unique to each motor. Failure to perform proper set up can lead to substandard performance and /or premature failure of the system components.

When you need
a motor that can
handle the severe
demands that
inverters create,
look no further than
JuggerNaut

™

Many retailers are now retrofitting inverters to their existing A/C and refrigeration equipment to save energy, only to
discover that the OEM motors do not hold up to the strain that inverters place on them.

–JuggerNaut Inverter Duty motors are the solution!

• UL and CSA recognized Class F insulation for 70°C (158˚F) max
ambient conditions provides longer motor life.

• Inverter Duty Rated to be Corona Free with conductive bearing
grease for reliable use with today’s inverters.

• Voltage Change Module (VCM)

™

– Our own quick connect

voltage change device makes voltage changes quick and easy.

• Easy to remove 56H rigid base provides maximum mounting
versatility and reduces inventory.

• JuggerNaut condenser fan motors are available in 1 HP, 1.5 HP
and 2 HP at 1140 RPM and 1 HP at 850 RPM. All are three
phase and 208-230/460 volt.

Tel: [phone]

Fax: [phone]

Bulletin #6031 4/08

Your Authorized Distributor is:

Our new Green Choice™ brand of motors

are designed to address today’s

environmental concerns. A Green

Choice motor saves energy by

reducing the amount of electricity

needed, indirectly reducing the amount

of carbon dioxide emitted into the air.

Carbon dioxide is thought to contribute to global warming,

and coal-fired power plants emit a majority of carbon dioxide.

Green Choice motors can also reduce noise and contribute to

a more environmentally friendly equipment system. A Green

Choice motor can save money and makes it your most

eco-friendly motor choice.

Distribution Services
Electrical Products Company
531 N. Fourth Street
Tipp City, OH 45371

A DIVISION OF A. O. SMITH CORPORATION

www.aosmithmotors.com

Copyright © 2008 A. O. Smith Corporation