®
Residential Gas Water Heaters
POWER-VENT WATER HEATER
The ProMax® Power-Vent 40 and 50-gallon residential gas water heaters are equipped with
A. O. Smith’s pateneted C3 Technology
offering superior energy efficiency and operational cost savings. In addition A. O. Smith has
engineered other enhancements into its power-vent design, for easier installation and maximum
venting flexibility. A power-vent water heater provides an alternative to conventional vertical-vent
models, which require the use of a metal vent. They provide a solution to potential venting
problems in replacement applications and offer versatile options for placement of gas water
heaters in residential new construction.
VERSATILE POWER-VENT DESIGN
40 and 50-gallon models vent using 2", 3" or 4" Schedule 40 PVC, CPVC or ABS pipe.
Canadian installations require ULC S636 approved PVC or CPVC pipe for venting.
System versatility allows combined horizontal and vertical vent runs up to 120 equivalent feet
with 3" pipe, up to 160 equivalent feet with 4" pipe on 40,000 BTU and 50,000 BTU models
All models supplied with termination elbow and screens. See page 2 for complete information
on vent distances and supplied elbows and screens for all models.
INTELLI-VENT™* GAS CONTROL
Equipped with a nearly indestructible silicon nitride hot surface ignitor – no standing pilot
Advanced electronics for more precise control of water temperature and easy to under-
stand system diagnostics
Side-mounted gas connection simplifies installation
EXCLUSIVE POWER-VENT BLOWER
Specifically designed and manufactured by A. O. Smith Electrical Products
Equipped with 110/120 volt electrical system, rating 3 amps or less
6-foot cord with standard 3-prong male connector
DYNACLEAN™ DIFFUSER DIP TUBE
Reduces harmful lime and sediment buildup; maintains efficiency and maximizes tank life
Made from long-lasting PEX cross-linked polymer
EXCLUSIVE COREGARD™ ANODE ROD
Aluminum anode with stainless steel core protects tank against corrosion
GREEN CHOICE® GAS BURNER
Patented “Eco-Friendly” design reduces NOx emissions up to 33% and
meets requirements for less than 40 ng/j for low NOx emissions
DURABLE TAMPER-RESISTANT BRASS DRAIN VALVE
®
PERMAGLAS
Patented glass lining protects tank interior
GLASS TANK COATING
CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE
LISTED BY UNDERWRITERS LABORATORIES
Listed according to ANSI Z21.10.1 or 10.3 - CSA 4.1 or 4.3 standards governing storage-type water heaters.
Additional code compliance: UBC, CEC, SBCC, CABO, HUD, BOCA National
heaters codes, Current Edition ASHRAE/IESNA 90.1 and 2004 NAECA
EQUIPPED WITH C3 TECHNOLOGY– See other side
6-YEAR LIMITED TANK & PARTS WARRANTY
For complete information, consult written warranty
* Intelli-Vent
July 2012R
™
is a registered trademark of Emerson Electric Company
®
design, ENERGY STAR® qualified models are also available,
GAS-FIRED
®
GAS-FIRED
(Applicable on
some models)
Page 1 of 2
AOSRG45600
248004 AOSRG45600.indd 1248004 AOSRG45600.indd 1 6/29/12 10:48 AM6/29/12 10:48 AM
Residential Gas Water Heaters
®
POWER-VENT WATER HEATER
FIRST
MODEL HOUR ENERGY GALLON
NUMBER RATING FACTOR CAPACITY
GALLONS PER HOUR (LBS)
BTU INPUT
PER HOUR
NATURAL
RECOVERY
90°F RISE R
GALLONS VALUE**
A B C D E F
DIMENSIONS IN INCHES
APPROX.
SHIPPING
VENT
OPTIONS
WEIGHT
GPVH-40 69 .65 40 40,000 44 8 63 55 18-1/2 13 8 49 2, 3 or 4 157
GPVH-50 83 .65 50 40,000 44 8 65 56-3/4 20 13 8 50-1/4 2, 3 or 4 177
GPVR-40† 70 .67 40 40,000 44 16 63 55 20-1/2 13 8 49 2, 3 or 4 166
GPVR-50
† 83 .67 50 40,000 44 16 65 56-3/4 22 13 8 50-1/4 2, 3 or 4 186
GPVT-40 80 .65 40 50,000 53 16 63 55 20-1/2 13 8 49 2, 3 or 4 166
GPVT-50 83 .65 50 50,000 53 16 65 56-3/4 22 13 8 50-1/4 2, 3 or 4 186
GPVX-50 114 .65 50 62,500 66 16 65 56-3/4 22 13 8 50-1/4 3 or 4
GPS-75* N/A N/A 74 80,000 86 12 66 57 25-1/2 15 16 50-1/4 3 or 4 245
Propane Inputs: GPVH-40, GPVH-50, GPVR-40, GPVR-50: 40,000 BTU, GPVT-40, GPVT-50: 50,000 BTU, GPVX-50: 55,000 BTU, GPS-75: 80,000 BTU
*74-gallon model is not FVIR construction
**R8=1", R12=1-1/2" and R16=2" foam capacity
† GPRV-40 and GPRV-50 and are ENERGY STAR
®
qualified
MAXIMUM VENT DISTANCE
MODEL BTU (Total Equivalent Feet)
C
3/4" MALE WATER
CONNECTIONS
FOR ALL MODELS
EXCEPT 74 GALLON
(1" MALE)
NUMBER INPUT
2" Pipe 3" Pipe 4" Pipe
E
GPVH-40 40,000 40' 120' 160'
GPVH-50 40,000 40' 120' 160'
GPVR-40
GPVR-50
† 40,000 40' 120' 160'
† 40,000 40' 120' 160'
GPVT-40 50,000 40' 120' 160'
GPVT-50 50,000 40' 120' 160'
GPS-75 80,000 N/A 30' 100'
40 and 50-gallon models are supplied with 2", 22-1/2° Termination Elbow, plus 2", 3" and
4" Screens (GPVX-50 Models do not include 2” screens).
74-gallon model is supplied with 3", 90° Termination Elbow, plus 3" Screen.
2" & 3" elbows are equal to 5' of vent pipe. 4" elbows are equal to 8' of vent pipe.
Important: Read and follow requirements shown in the Product Manual for ProMax Power-Vent gas
water heaters dealing with type, placement and length of vent pipe and vent termination, as well as
clearances required to provide adequate combustion and proper ventilation.
Flammable Vapor Ignition Resistant
C3 Technology
®
Water Heaters
6' POWER CORD
FA C T O R Y
SUPPLIED
1/2" GAS
CONNECTION
F
B A
D
Corderite Combustion Containment (C3) design
meets American National Standards Institute standards
(ANSI Z21.10.1 or 10.3 - CSA 4.1 or 4.3) that deal with the accidental or
unintended ignition of flammable vapors, such as those emitted by gasoline.
Covered by four U.S. patents, C3 Technology gas water heaters
feature a sealed combustion chamber with air intake screen and
a fireproof Corderite flame arrestor built into the water heater base.
ProMax
vapor sensor, which automatically shuts down the blower, Intelli-Vent
®
Power-Vent water heaters are also equipped with a flammable
™
gas control and hot surface ignitor if the presence of flammable vapors
is detected.
If flammable vapors
accidentally enter
the combustion
chamber, the
Corderite flame
arrestor is designed
so flames burn off
the top surface and
cannot escape down
through the arrestor.
186
For Technical Information and Automated Fax Service, call 800-527-1953. A. O. Smith Corporation reserves the right to make prod uct changes or improvements without prior notice.
July 2012R
www.hotwater.com
248004 AOSRG45600.indd 2248004 AOSRG45600.indd 2 6/29/12 10:48 AM6/29/12 10:48 AM
Page 2 of 2
AOSRG45600