STACK-RACK
SP ACE SA VING GENESIS STACK-RACK
Install two Genesis boilers in the footprint of one! Up to 5 Million BTU's!
Install four Genesis boilers in the footprint of two! Up to 10 million BTU's!
Saves valuable floor space!
Get the fire power you need in those tight hard to fit boiler rooms!
Sturdy - The Stack-Rack is made of heavy angle and tubular steel. It is designed to be a sturdy and
stable platform for the top mounted boiler. The upper boiler is mounted using heavy clamps that lock and
bolt the upper boiler into position. The entire rack can be bolted to the boiler room floor for maximum
stability.
Factory Paint - The Stack-Rack is factory painted with the same durable powder coat finish as the
Genesis Boiler, and will remain rust free for years, even in those harsh boiler room atmospheres.
Easy Assembly - The Stack-Rack is shipped as a kit for field assembly and includes step-by-step
instructions. Each part is clearly labeled, pre-cut, and pre-drilled for fast easy assembly.
Revised April 2001
A 012.13
ST ACK-RACK ASSEMBLY
GENESIS MODELS
GB/GW-200 thru GB/GW-750
GENESIS MODELS
GB/GW-1000 thru GB/GW-2500
Stack Rack
Boiler Models Part Number A
GB/GW-200 thru 400 210427-001 53-1/4
GB/GW-500 thru 750 210427-000 75
A.O. Smith Water Products Co., Inc. On Line
www.hotwater.com
For Technical Information and
Automated Fax Service,
Phone: 800-527-1953
A 012.14
Models Part Number "A" Dimn.
GB/GW-1000, 1300 211399-000 75
GB/GW-1500, 1850 211399-001 95
GB/GW-2100, 2500 211399-002 116
A. O. Smith Corporation reserves the right to make product changes
or improvements at any time without notice.
© A. O. Smith Corp., 2001
Stack Rack Kit
A. O. Smith
Water Products Company
Ashland City, TN
A Division of A. O. Smith Corporation
Printed in U.S.A.