Residential Electric Water Heaters
MEETS ENERGY-EFFICIENCY REQUIREMENTS FOR MOST ELECTRIC UTILITY
REBATE PROGRAMS
2-1/2"-thick CFC-free foam insulation, external heat traps and other energy-saving features
produce new, higher Energy Factors, which meets Energy Star Home Program recommendations
and Title 24 requirements.
A. O. SMITH DYNACLEAN™ DIFFUSER DIP TUBE
Helps reduce lime and sediment buildup, maximizes hot water output.
Made from long-lasting PEX cross-link polymer.
LONG-LASTING LOW-WATT DENSITY COPPER LOWER HEATING ELEMENT
Upper element is high-watt density copper.
COREGARD™ ANODE ROD
Aluminum anode with stainless steel core protects tank against corrosion
longer than ordinary mild steel anodes.
DURABLE TAMPER-RESISTANT BRASS DRAIN VALVE
®
A. O. SMITH PERMAGLAS
Protects steel tank from rust.
GLASS COATING
FACTORY-INSTALLED SIDE-MOUNTED TEMPERATURE
AND PRESSURE (T&P) RELIEF VALVE
Top-mounted T&P Valve available as option on some models.
6-YEAR LIMITED TANK AND PARTS WARRANTY
For complete information consult written warranty or A. O. Smith Water Products Company.
UPGRADE TANK WARRANTY TO 10 YEARS
See details on page 2.
CODE COMPLIANCE: MEETS OR EXCEEDS FEDERAL MINIMUM ENERGY STANDARDS
ACCORDING TO THE LATEST EDITION OF THE NATIONAL APPLIANCE ENERGY
CONSERVATION ACT (NAECA). ALSO COMPLIES WITH ASHRAE 90.1-2004 AND
CURRENT EDITIONS OF ICC CODES AND HUD STANDARDS
CERTIFIED TO UL 174 FOR HOUSEHOLD ELECTRIC WATER HEATERS
Revised September 2008
Page 1 of 2
AOSRE50200
Residential Electric Water Heaters
DIMENSIONS IN INCHES
A B C
APPROX.
SHIPPING
WEIGHT
(LBS)
MODEL
NUMBER
FIRST
HOUR
RATING
GALLONS
ENERGY
FACTOR
GAL.
CAP.
ELEMENT WATTAGE
240 VAC
STANDARD MAXIMUM
RECOVERY
90ºF RISE
GALLON
PER HOUR
R
VALUE
TALL MODELS
ECRT-40 54 .93 40 4500 6000 21 20 60 19 53-1/2 120
ECRT-52*
ECRT-66
ECRT-80*
60 .93 50 4500 6000 21 20 56-1/2 21-1/2 47-1/2 135
76 .92 66 4500 6000 21 20 61 23 53 180
87 .93 80 4500 6000 21 20 61-1/2 25 52 210
SHORT MODEL
ECRS-50
Recovery capacity based on actual performance tests.
For 10-year tank warranty, change “E” to “P” in model number (PCRT-40).
* Models not available with top T&P Valve.
62 .93 50 4500 6000 21 20 49 23 40-1/2 155
CONNECTION
HOT
ANODE ROD
COLD
CONNECTION
8"
B
A
For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
Revised September 2008
www.hotwater.com
C
Page 2 of 2
AOSRE50200