How it Works
AOC
Loading...
A2272PWH
User Guide
67 pgs14.69 Mb0
Table of contents
Loading...

AOC A2072PWH, A2272PWH User Guide

SMART All-in-One User Manual
A2072PWH/A2272PWH/A2472PWH
www.aoc.com
1
©2013 AOC. All Rights Reserved.
TABLE OF CONTENT
SAFETY ....................................................................................................................................4
National Conventions ....................................................................................................................4
Power ................................................................................................................................................5
Installation ........................................................................................................................................ 6
Cleaning ............................................................................................................................................ 7
Other.................................................................................................................................................8
SETUP ....................................................................................................................................... 9
Contents of the Box ......................................................................................................................9
Adjusting Viewing Angle .................................................................................................................9
Connecting the Monitor ............................................................................................................ 10
Connecting usb keyboard & mouse ........................................................................................ 11
ADJUSTING ......................................................................................................................... 12
Setting Optimal Resolution ....................................................................................................... 12
OPERATING INSTRUCTIONS ....................................................................................... 15
Hotkeys .......................................................................................................................................... 15
OSD Setting .................................................................................................................................. 16
LED Indicator ............................................................................................................................... 23
STARTING WITH ANDROID .......................................................................................... 24
Customizing your Home Screen .............................................................................................. 25
Viewing the Apps Gallery ........ ...................... ............................................................................. 25
Browsing the Internet ................................................................................................................. 25
Using the On-screen Keyboard ................................................................................................ 26
Connecting to Network ............................................................................................................ 26
Adjusting the Settings for Android .......................................................................................... 27
Android Software Update ......................................................................................................... 29
DRIVER ................................................................................................................................. 30
2
Monitor Driver ............................................................................................................................ 30
i-Menu ............................................................................................................................................ 42
e-Saver ............................................................................................................................................ 43
Screen+ .......................................................................................................................................... 44
TECHNICAL SUPPORT (FAQ) ....................................................................................... 45
Troubleshoot ................................................................................................................................ 45
Error Message & Possible Solution .......................................................................................... 46
APPENDIX ........................................................................................................................... 47
Plug And Play ................................................................................................................................. 47
Keyboard And Mouse ................................................................................................................. 47
Specifications ................................................................................................................................ 49
Preset Display Modes ................................................................................................................. 52
Pin Assignments ............................................................................................................................ 55
REGULATION ..................................................................................................................... 56
EUROPE ......................................................................................................................................... 56
TAIWAN ........................................................................................................................................ 57
USA ................................................................................................................................................. 57
CANADA ...................................................................................................................................... 58
MEXICO ........................................................................................................................................ 59
BRAZIL .......................................................................................................................................... 59
KOREAN ....................................................................................................................................... 59
FCC Notice .................................................................................................................................. 60
WEEE Declaration ....................................................................................................................... 60
WEEE Declaration for India ...................................................................................................... 61
SERVICE ................................................................................................................................ 62
Warranty Statement for Europe .............................................................................................. 62
Warranty Statement for North & South America (excluding Brazil) .............................. 64
Ease Programe .............................................................................................................................. 67
3

SAFETY

NATIONAL CONVENTIONS

The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE:
A NOTE indicates important information that helps you make better use of your monitor..
CAUTION:
A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING:
A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.
4

POWER

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 19V, 3.42A
The wall socket shall be installed near the equipment and shall be easily accessible.
For use only with the attached power adapter (Output 19VDC) which have UL, CSA listed license (Only for monitors with power adapter).
Manufacturers:
1) TPV ELECTRONICS(FUJIAN) CO., LTD model: ADPC1965
2) SHENZHEN HONOR ELECTRONICS CO., LTD. / model: ADS-65LSI-19-1 19065G
5

INSTALLATION

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the floor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence overheating may cause a fire or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or with the stand:
Installed on the wall
11 7/8 inches
30cm
4 inches
10cm
Installed with stand
4 inches
10cm
4 inches
10cm
11 7/8 inches
30cm
4 inches
10cm
Leave at least this space around the set.
4 inches
10cm
Leave at least this space around the set.
6
4 inches
10cm

CLEANING

Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
7

OTHER

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Do not knock or drop the monitor during operation or transportation.
For display with glossy bezel the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
8

SETUP

CONTENTS OF THE BOX

1. LCD Monitor
2. CD Manual
3. Power Cord
4. Power Adapter
5. D-SUB Cable
6. Audio Cable
7. USB Cable (upstream)
8. HDMI Cable
9. USB Keyboard
10. USB Mouse
• Not all signal cables (D-SUB, Audio, USB , HDMI cables) and Keyboard , Mouse will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.

ADJUSTING VIEWING ANGLE

• For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor’s angle to your own preference.
• Hold the stand so you will not topple the monitor when you change the monitor’s angle.
• You are able to adjust the tilted angle to 15°or 57°.
15° 57°
• Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
• It is recommended to stabilize with a fixed point in order to lock the stand if the tilted angle is equal to or over 20°.
• Do not adjust the tilted angle less than 20°. The monitor may fall caused by instability.
• Pay attention not to bounce back the stand while adjusting the tilted angle.
9

CONNECTING THE MONITOR

Cable connections at the back of monitor:
9
10
11
12
8 7 6 5
1. Power Input 7. USB Port
SD Card Slot (SD/SDHC/SDXC/
2.
MMC/MS/MS-Pro)
3. D-SUB Signal Input 9. USB Port
4. HDMI Signal Input 10. Audio In
5. RJ45 (10/100Mbps) 11. Earphone Out
6. USB Port 12. Kensington Lock
8. USB Port (Micro USB)
1 2 3 4
To protect equipment, always turn off the PC and monitor before connecting.
1. Connect the power cable to the AC port on the back of the monitor.
2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.
3. Optional – (Requires a video card with HDMI port) – Connect one end of the HDMI cable to the back of the monitor and connect the other end to the computer’s HDMI port.
4. Turn on your monitor and computer.
5. Video content supporting resolution: VGA / HDMI: 1600 x 900/60Hz (A2072PWH);1920 x 1080/60Hz(A2272PWH/A2472PWH).
If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting on page 45.
10

CONNECTING USB KEYBOARD & MOUSE

To use this monitor for Android system, you need to connect USB keyboard/mouse to the USB port at the back of monitor:
To use this monitor as a normal monitor for D-SUB and HDMI input controlled by the same USB keyboard/mouse connected to the USB port at the back of monitor, you need to connect a B-type USB cable from this monitor to your PC.
PC
USB Keyboard/Mouse

Setting up the USB keyboard

For the first time using this monitor, you will be prompted to do the USB keyboard settings. Please check the box “Use USB Keyboad” and click the next step to complete the keyboard setting procedule:
11

ADJUSTING

SETTING OPTIMAL RESOLUTION

Windows Vista

1. Click START.
2. Click CONTROL PANEL.
3. Click Appearance and Personalization.
4. Click Personalization.
12
5. Click Display Settings.
6. Set the resolution SLIDE-BAR to 1600x900(A2072PWH);1920 x1080(A2272PWH/ A2472PWH).

Windows 8

1. Right click and click All apps at the bottom-right of the screen.
2. Set the “View by” to “Category”.
13
3. Click Appearance and Personalization.
4. Click DISPLAY.
5. Set the resolution SLIDE-BAR to 1600x900(A2072PWH);1920 x1080(A2272PWH/ A2472PWH).

Windows ME/2000

1. Click START.
2. Click SETTINGS.
3. Click CONTROL PANEL.
4. Double click DISPLAY.
5. Click SETTINGS.
6. Set the resolution SLIDE-BAR to 1600x900(A2072PWH);1920 x1080(A2272PWH/ A2472PWH).
14

OPERATING INSTRUCTIONS

HOTKEYS

• Connect the power cord and the video cable.
• Press the POWER key to turn on the monitor. The power indicator will light up.
12345
For menu control
1. POWER 4.
2. MENU / ENTER 5. SOURCE / AUTO / EXIT
3.
/ VOLUME
+
• Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally packed at the factory.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
• Do not scratch the screen with hard things, it may cause permanent damage.
• Don’t leak liquid into monitor which will result in the damage of component.
15
/ CLEAR VISION
–

OSD SETTING

Basic and simple instruction on the control keys.
Luminance Image Setup Color Setup Picture Boost OSD Setup ExitExtra
Contrast 50
Brightness 50
Eco mode Standard
1. Press button to display the control menu.
2. Press or button to navigate through the menu items. Once the desired item is highlighted, press button to activate it. If there is a sub-menu, press or button to navigate through the sub-menu functions.
3. Press or button to change the settings of the selected function. Press button to exit. If you want to adjust any other function, repeat steps 2~3.
• If there is only one signal input, the item “Input Select” is disabled.
• If the screen size is 4:3, or the input signal resolution is “Native”, the item of “Image Ratio” is
disabled.
• If one of the DCR, Color Boost, or Picture Boost function is activated; the other two are turned off accordingly.
Gamma Gamma 1
DCR Off
Overdrive Off
16

Luminance

Luminance Image Setup Color Setup Picture Boost OSD Setup ExitExtra
Contrast 50
Brightness 50
Eco mode Standard
1. Press button to display menu.
2. Press or button to select (Luminance), and press button to enter.
3. Press or button to select submenu, and press button to enter.
4. Press or button to adjust.
5. Press button to exit.
Main Menu Sub Menu Item Description
Brightness 0~100 Backlight Adjustment. Contrast 0~100 Contrast from Digital-register.
Gamma Gamma 1
DCR Off
Overdrive Off
Standard Standard Mode.
Text Text Mode.
Luminance
Overdrive
Eco mode
Gamma
DCR
Weak Medium Strong Off
Internet Internet Mode.
Game Game Mode.
Movie Movie Mode.
Sports Sports Mode.
Gamma 1 Adjust to Gamma 1. Gamma 2 Adjust to Gamma 2. Gamma 3 Adjust to Gamma 3. Off Disable dynamic contrast ratio.
On Enable dynamic contrast ratio.
17

Image Setup

Image Setup Color Setup Picture Boost OSD Setup ExitExtra
Clock 50
Phase 50
Sharpness 50
H. Position 50
V. Position 50
1. Press button to display menu.
2. Press or button to select (Image Setup), and press button to enter.
3. Press or button to select submenu, and press button to enter.
4. Press or button to adjust.
5. Press button to exit.
Main Menu Sub Menu Item Description
Image Setup
Clock 0~100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0~100 Adjust Picture Phase to reduce Horizontal-Line noise. Sharpness 0~100 Adjust picture sharpness. H.Position 0~100 Adjust the horizontal position of the picture. V.Position 0~100 Adjust the vertical position of the picture.
Luminance
18

Color Setup

Color Setup Picture Boost OSD Setup ExitExtra Luminance Image Setup
Color Temp. Warm
DCB Mode Off
1. Press button to display menu.
2. Press or button to select (Color Setup), and press button to enter.
3. Press or button to select submenu, and press button to enter.
4. Press or button to adjust.
5. Press button to exit.
Main Menu Sub Menu Item Description
Color Setup
Color Setup
DCB Mode
DCB Demo on or off Disable or Enable Demo.
Red 50
Green 50
Blue 50DCB Demo O ff
Warm
Normal
Cool
sRGB
Recall Warm Color Temperature from EEPROM.
Recall Normal Color Temperature from EEPROM.
Recall Cool Color Temperature from EEPROM.
Recall SRGB Color Temperature from EEPROM.
Red Red Gain from Digital-register.
User
Green Green Gain Digital-register.
Blue Blue Gain from Digital-register. Full Enhance on or off Disable or Enable Full Enhance Mode. Nature Skin on or off Disable or Enable Nature Skin Mode. Green Field on or off Disable or Enable Green Field Mode. Sky-blue on or off Disable or Enable Sky-blue Mode. AutoDetect on or off Disable or Enable AutoDetect Mode.
19

Picture Boost

Picture Boost OSD Setup ExitExtra Luminance Image Setup Color Setup
Bright Frame Off
Frame Size 50
Brightness 50
Contrast 50
1. Press button to display menu.
2. Press or button to select (Picture Boost), and press button to enter.
3. Press or button to select submenu, and press button to enter.
4. Press or button to adjust.
5. Press button to exit.
Main Menu Sub Menu Item Description
Frame Size 14~100 Adjust Frame Size.
Picture Boost
Brightness 0~100 Adjust Frame Brightness. Contrast 0~100 Adjust Frame Contrast. H. position 0~100 Adjust Frame horizontal position. V. position 0~100 Adjust Frame ver tical position. Bright Frame on or off Disable or Enable Bright Frame.
H. Position 50
V. Position 50
20

OSD Setup

OSD Setup ExitExtra Luminance Image Setup Color Setup Picture Boost
H. Position 50
Timeout 120 Break Reminder Off
S.Power On Sync Off
V. Position 0
1. Press button to display menu.
2. Press or button to select (OSD Setup), and press button to enter.
3. Press or button to select submenu, and press button to enter.
4. Press or button to adjust.
5. Press button to exit.
Main Menu Sub Menu Item Description
H. Position 0~100 Adjust the horizontal position of OSD. V. Position 0~100 Adjust the ver tical position of OSD. Timeout 5~120 Adjust the OSD Timeout. Transparence 0~100 Adjust the transparence of OSD.
OSD Setup
Language Select the OSD language.
Android will not be on if the previous off mode is D-Sub or HDMI.
OFF(default)
While android is on, android mode keep on, even user change to D-Sub or HDMI mode, to prevent system be
S.Power On Sync
turned on again. Android will always on no matter the previous mode is.
ON
While android is on, android mode keep on, even user change to D-Sub or HDMI mode, to prevent system be turned on again.
Transparence 25Language English
21
Loading...
+ 46 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use