Anvil R-2360-6 Service manual
MUELLER
Description Material Material Standard
G-1 Cap Nut Bronze ASTM B62
G-3 Hand Wheel Cast Iron ASTM A126 CL.B
G-4 Washer Brass
G-5 Bush Nut Bronze ASTM B584
G-7 Gland Nut Bronze ASTM B21 Alloy 464
G-8 Packing Gland Ductile Iron ASTM A536 Grade 65-45-12
G-10 Gland Bolt Stainless Steel Type 304
G-11†† Yoke Bolt & Nut Stainless Steel Type 304
G-16 Bonnet Bolts & Nuts Stainless Steel Type 304
G-23 Stem Packing Lubricated Flax
G-206 Guide Cap Bearings Celcon
G-209 Wedge, Rubber Encapsulated Cast Iron** ASTM A126 CL.B
G-211 Bonnet Gasket Rubber ASTM D2000
G-212 Body Cast Iron ASTM A126 CL.B
G-213 Stem Bronze ASTM B138
G-214† Bonnet & Yoke w/Bushing Cast Iron ASTM A126 CL.B
G-215†† Bonnet Cast Iron ASTM A126 CL.B
G-216†† Yoke Cast Iron ASTM A126 CL.B
G-217 O-ring Nitrile ASTM D2000
G-218 Disc Nut Bronze ASTM B62
G-219 Stem Nut Pin Stainless Steel Type 304
Catalog
Part No.
Dimension* 2-1/2" 3" 4" 6" 8" 10" 12"
A 19.50" 19.25" 23.68" 31.38" 38.50" 47.00" 53.50"
AA 15.75" 15.50" 19.00" 24.50" 29.50" 35.75" 40.50"
E 7.00" 7.00" 10.00" 12.00" 14.00" 16.00" 16.00"
R 7.00" 7.50" 9.00" 11.00" 13.50" 16.00" 19.00"
FF 7.50" 8.00" 9.00" 10.50" 11.50" 13.00" 14.00"
UU 5.50" 6.00" 7.50" 9.50" 11.75" 14.25" 17.00"
FFF
(number and size of holes)
4--.75" 4--.75" 8--.75" 8--.88" 8--.88" 12--1" 12--1"
Turns to open 11 11 14 20.5 27 33.5 39
Weight (lbs.)* 68 72 130 194 289 448 596
Size
FF
R-2360-6:O.S.&Y. RESILIEnT WEdGE GaTE VaLVE WITH FLanGE EndS
q
• 2-1/2", 3", 4", 6", 8", 10" and 12" SIZES
• MEETS OR EXCEEdS aLL aPPLICaBLE
REQUIREMEnTS OF UL 262 and FM 120/1130
SPECIFICaTIOnS and COMPLIES WITH nSF-61
• IROn BOdY WITH MUELLER
EPOXY COaTEd InTERIOR & EXTERIOR SURFaCES
• OUTSIdE SCREW and YOKE (O.S.&Y.)
• FLanGEd End dIMEnSIOnS and dRILLInG
®
O.S.&Y. Resilient Wedge Gate Valve
• RUBBER EnCaPSULaTEd IROn WEdGE
• adJUSTaBLE PaCKInG
• HandWHEEL – OPEn LEFT OR OPEn RIGHT
®
PRO-GaRd™ FUSIOn
• 200 PSIG (1379KPa) MaXIMUM WORKInG PRESSURE -
400 PSIG (2758 KPa) STaTIC TEST
• EPOXY COaTInG MEETS OR EXCEEdS
anSI/aWWa C550 and COMPLIES WITH nSF-61
Options
• StainleSS Steel faStenerS: type 304 or 316
• aStM B98-C66100/H02 SteM
PARTSLIST
DIMENSIONS
See page B-1-22 for ordering insturctions.
*All dimensions are in inches. All weights are in pounds and are approximate.
** Fully encapsulated in molded rubber with no iron exposed.
† 2-1/2" - 6" sizes have a one-piece bonnet & yoke.
††8" - 12" sizes have a two-piece bonnet & yoke.
PROJECT INFORMATION APPROVAL STAMP
Project:
Address:
Contractor:
Engineer: Remarks:
Submittal Date:
Notes 1:
Notes 2:
Mueller ul/FM - 9.05
Approved
q
Approved as noted
q
Not approved
q
Loading...