Anthem PVA-2 Brochure

PVA 2 •PVA 5
PVA 2
2 x 125 watts RMS
PVA 5
5 x 125 watts RMS
The Fabulous Sound of the PVA 7 is now available in 2 and 5 Channels Versions.
The PVA 2 and PVA 5 share all of the design features of the PVA 7 (see PVA 7 brochure) that make PVA Series amplifers, by a wide margin, the best performing, best built and best value amplifiers available!
Introducing the New …
PVA 2 PVA 5 PVA 7
SONIC FRONTIERS INTERNATIONAL 3535 LAIRD ROAD, UNIT #16, MISSISSAUGA, ONTARIO, CANADA L5L 5Y7 TEL: (905) 828-4575 FAX: (905) 828-4585
E-MAIL: SFI@sonicfrontiers.com WEB SITE: http//www.sonicfrontiers.com
MULTI-CHANNEL AMPLIFIERS
TECHNICAL SPECIFICATIONS FOR PVA 2, PVA 5
INPUTS PVA 2 2 Single-ended, 1 Relay Trigger (3.5 mm Mono Jack).
PVA 5 5 Single-ended, 1 Relay Trigger (3.5 mm Mono Jack)
OUTPUTS PVA 2 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack)
PVA 5 5 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack)
SWITCHES Front Panel: Power On/Off
Rear Panel: 3 On/Off Modes: Trigger, Manual, Auto
POWER OUTPUT (Continuous, RMS, 20 Hz - 20 kHz, <1.0% THD, AC line voltage heldgconstant at full load).
Impedance: 8 4 2 # of Channels Driven: 1 All 1 All 1 All PVA 2, PVA 5 125 W 105 W 200 W 140 W 300 W -
HEADROOM 1.25 dB (8 Ω); 2.13 dB (4 Ω) POWER BANDWIDTH 10 Hz - 80 kHz (125 W @ 8 Ω) FREQUENCY RESPONSE 20 Hz - 20 kHz, (-0.20 dB); 5 Hz - 100 kHz, (-2.5 dB) THD&N <0.002%, @ 1 kHz; <0.03% @ 20 kHz (125 W into 8 Ω) INPUT SENSITIVITY 1.12 VRMS for 125 W into 8 INPUT IMPEDANCE 10k DAMPING FACTOR 200 @ 1 kHz (ref. 8 Ω) S/N RATIO 122 dB, A-weighted (ref. 125 W) CHANNEL SEPARATION >65 dB (100 Hz - 10 kHz) VOLTAGE GAIN 29 dB SLEW RATE 28 V/µs POWER REQUIREMENTS PVA 2 500 VA @ maximum power output (8 load)
PVA 5 1125 VA @ maximum power output (8 load)
DIMENSIONS PVA 2 17
1
/4” (44 cm) Wide x 5 1/4” (13.5 cm) High x 11” (28 cm) Deep
PVA 5 17
1
/4” (44 cm) Wide x 5 1/4” (13.5 cm) High x 13 1/4” (33.5 cm) Deep
NET WEIGHT PVA 2 26 lbs (12 kg)
PVA 5 36 lbs (16.5 kg)
Measurements were performed with an Audio Precision System Two @ 120 VAC Specifications and/or features are subject to change without notice as design improvements are incorporated.
Loading...