Anko WIRELESS FM TRANSMITTER User Manual
WIRELESS FM TRANSMITTER
user manual
3
5 7 787
1. 3.5mm earphone plug
2. Car charger for wireless FM transmi er
3. Power On/Off/switch wireless Transmi er On/off
bu on.
4. LCD display
5. Set bu on
6. Channel up/down selector
7. M1/M2/M3 bu on (Memory1,2,3)
8. DC jack for car charger
DEVICE OVERVIEW
6 214
Keycode: 42912859
Connect the car charger adapter (included) to your FM
3.
the unit.
4. Setup procedure:
transmission mode. The FM frequency will be display.
c. Plug the 3.5mm stereo cable into your audio device
(Portable audio player, CD player or mobile).
channel from 88.1-107.9 MHz.
e. On the car FM radio, turn to the same frequency
f. Adjust the volume on the connected device and your
car radio volume.
Note:
select another frequency for use with the FM
5. Programming the channels:
er has 3 programmable channels, select
the channel you want to store then press M1/M2/M3
on for about 3 seconds to store current FM frequency.
bu
When you want to select the frequency directly just press
M1/M2 or M3 bu on.
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free
from defects in materials and workmanship for the period
stated above, from the date of purchase, provided that
the product is used in accordance with accompanying
Consumer Law.
Kmart will provide you with your choice of a refund, repair
or exchange (where possible) for this product if it
bear the reasonable expense of claiming the warranty.
This warranty will no longer apply where the defect is a
Please retain your receipt as proof of purchase and
contact our Customer Service Centre on 1800 124 125
(Australia) or 0800 945 995 (New Zealand) or
for expense incurred in returning this product can be
addressed to our Customer Service Centre at 690
Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded
replacement or refund for a major failure and
repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
1. Ba ery opera on: (Ba eries not included)
Carefully open the ba ery cover on the near of the FM
transmi er and insert 2 X 1.5V AAA baeries into the
baery compartment. Please ensure that they are
inserted in accordance with the polarity markings,
or the unit will not work.
Note: When the unit is used with the car power adaptor,
or if it will not be used for a long period of
remove the ba eries to avoid damaging the set from
ba ery leakage.
Do not mix ba ery types; only use the ba eries of the
same type for the set. when inser ng
new ba eries, do not try to mix old ba eries with the
new ones.
me, please
to confirm.
The sequence is as follows: hour-> minutes
7.Set the LED light
light , press both UP/DOWN again to turn off the LED light.
Keycode: 42551249
Power Source:DC3V(Use 2 X 1.5V AAA Baeries Only) or external
power supply DC12-24V
Instruction Manual.
Please read all the information carefully before you use the device to avoid accidents and keep it for
future reference.
Keycode: 42912859
Important safety Information for Universal USB AC Charger/Single USB Car charger
1.In emergency cases,please unplug the electric socket.
Emergency cases include: Smoke from the unit
Changed shape
Liquid or material leakage
Dropped& broken casing or parts.
2.To prevent fire or shock of electric,do not expose this unit to rain or moisture.
3.This unit is for indoor use only.
4.Keep dry to prevent electric shock
5.Do not operate this adaptor with a damaged plug.
6.The appliance is not intended for use by young children or infirm person with-out proper supervision.
7.The socket-outlet shall be installed near the equipment and shall be easily accessible.
Introduction
For use with mobile phone,digital camera and other USB devices . Just plug it in to your wall socket and
start to use.
Specification:
AC charger
Input:AC100-240V,50-60HZ, 0.3A
Output:DC5V 1A max
Car charger
Input:DC12-24V
Output: 5V 1A
With over-voltage,over-current,and short-circui protection.
Loading...