1
s
Heated Pet Bed
Model no. CWD40*40-1X-12
User manual
IMPORTANT INSTRUCTIONS
RETAIN FOR FUTURE REFERENCE
2
IMPORTANT Safety Guards
WARNING Before using the product, please read the following
instructions carefully to ensure your safety and the safety of
your pet and to prevent damage to the product:
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been supervision or instruction concerning use
of the appliance in a safe way and understand the hazards
involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance should not be done by
children without competent adult supervision.
• Electric shock hazard exists if the supply cord is damaged
or chewed by the pet. Never leave the appliance
unattended during use.
IMPORTANT! The appliance is only to be used with the
adaptor provided with the appliance.
• The heat pad must be kept clear of dust or other dirt
particles. The appliance must be disconnected from mains
power during cleaning and when storing.
• Do not use if the appliance shows any signs of damage.
Heated Pet Bed must be used only with provided
adaptor, LY120-120-1000A
IMPORTANT! For electrical safety, any repairs to the product
must be carried out by a qualified electrical person only.
3
• For additional protection, it is strongly recommended that
the use of a residual current device (RCD/safety switch)
with a tripping current not exceeding 30mA be used on the
circuit supplying mains power to this product.
• Remove any packaging material before using the Pet Bed
for the first time. Safely dispose of all plastic bags and other
packaging material that may be potentially dangerous to
young children.
• The Pet Bed is intended for indoor use only.
CAUTION! Electric Shock Hazard. Never submerge the power
cable and the adaptor.
Although the heated mat is watertight, it must never be
submerged in water or any other liquid.
• Always disconnect the appliance from mains power before
carrying out any maintenance, cleaning or when not in use
for long periods of time.
• The heated mat is intended to be used only inside the bed
supplied; do not use it on any other product.
• Do not crush, deform or fold the pad, this will damage the
heating cable inside the pad.
• Power cable must be placed or protected to ensure it is not
accessible to animals.
• Not to be used for any other purpose.
• No liability can be accepted for any damage caused by non-
compliance with these instructions or any other improper
use or mishandling.
• Inspect regularly and remove if damaged or shows signs of
wear.
• If the supply cord is damaged, it must be replaced by a
qualified electrical person in order to avoid a hazard, or the
4
product must be disposed of.
• The Pet Bed should not be operated by means of an
external timer or separate remote-control system.
• Do not use with wires tucked in.
• Do not insert pins or sharp objects into the Electric Pet Bed.
• Unplug from the mains supply when not in use.
• This Pet Bed must always be kept in fully spread condition
during use to avoid overheating.
• When storing, allow the Pet Bed to cool before folding. Fold
gently but do not crease the Electric Heat Pad. To prevent
creasing do not place any other items on top of the Heat
Pad during storage.
• Do not wash the Electric Heat Pad. Clean the Pet Bed in
accordance with the instructions provided under the
heading ‘Care & Maintenance’ in this manual.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
5
TECH SPECS
PARTS
A.
1x Pet Bed
(washable)
C.
Power cable
B.
Electric heated
mat (12V)
D.
Adaptor (LY120-
120-1000A)
TECHNICAL
DATA
Bed Size:
18cm(H) × 68cm(W) ×
60cm(D)
Heat pad voltage:
12V DC
Heat pad power:
10W
Adaptor:
LY120-120-1000A
Input: 100-240V 50/60Hz
0.4A Max
Output: 12V 1000mA
6
Using the Product
• Insert the Electric Heated Mat inside the special pocket of
the Pet Bed then close the zip. Make sure your pet cannot
remove it.
• Place the Pet Bed on a flat and regular surface.
• Make sure the Power Cable comes out of the bed without
being squashed or damaged.
• Insert the Power Cable through the special hole at the back
of the bed.
• Place the Power Cable so that your pet cannot bite or
damage it.
• Connect the Electric Heated Mat to the adaptor and then
to mains power.
• Allow the mat to heat up at least for 15-20 minutes to reach
its optimum operating temperature.
THE PET BED DOES NOT HAVE THE SAME
EFFECT AS AN ELECTRIC BLANKET. WARM
TEMPERATURE SUITABLE FOR HUMANS
COULD BE TOO HOT FOR A PET.
• For your pet’s safety, inspect regularly and remove if
damaged.
• Always supervise your pet during use.
7
CARE AND MAINTENANCE
• Periodically check the product is in good working order and
ensure that it has no signs of damage, especially the power
cable and heated mat.
• Before storing the product allow it to cool down.
• Do not crease the appliance by placing items on the top of
it during storage.
• Clean the heated mat with a soft cloth or wet sponge; do
not use detergents or chemical substances.
• Wash the bed following care instructions on the product
label.
CARE INSTRUCTIONS:
REMOVE ELECTRICAL HEAT PAD BEFORE WASHING
WARM HAND WASH
DO NOT BLEACH
DRY FLAT IN SHADE
DO NOT TUMBLE DRY
DO NOT IRON
DO NOT DRY CLEAN
DRY THOROUGHLY BEFORE RE-USE OR STORAGE
NOT INTEDED FOR REPEATED WASHING
DRIECT CONTACT WITH PALE OR DAMP SURFACES
MAY RESULT IN COLOUR TRANSFER.
Loading...