Anker Nebula Prizm II, D2240 User Manual

For FAQs and more information, please visit:

www.SeeNebula.com

[e-mail]

[phone] (US) Mon-Fri 9:00 - 17:00 (PT)

[phone] (UK) Mon-Fri 6:00 - 11:00 (GMT)
[phone] (DE) Mo-Fr 6:00 - 11:00
[phone] (

日本) 月-金

9:00-17:00

© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of
Anker Innovations Limited, registered in the
United States and other countries.
Model: D2240

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 1-2 2018\11\8 星期四 15:46:00

51005001300 V01

Nebula Prizm II

User Manual

English

Table of Content

English 01

Deutsch 23

Español 43

Français 63

Italiano 83

日本語

103

123

01  ImportantSafetyInstructions

04  What’sIncluded

04  Overview

06  RemoteControl

07  GettingStarted

12  UsingtheNebulaPrizmII

16  UpgradingtheFirmware

17  Specications

18  Troubleshooting

19  Notice

20  Trademarks

21  Warranty

01

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 3-1 2018\11\8 星期四 15:46:00

English

English

ImportantSafetyInstructions

Read and understand all instructions before you use this device.
Do not change any settings that are not described in this manual.
If physical injury, loss of data, or damage is caused by failure to
follow instructions, the warranty does not apply.

Setup

• To reduce the risk of re and/or electric shock, do not expose

the device to rain or moisture, or objects lled with liquids,

such as vases, should not be placed on the device.

• Do not place the device in areas susceptible to excessive
dust and dirt or near any appliance generating a strong

magnetic eld.

• To prevent overheating, do not block or clog the ventilation
openings.

• Never place the device in a conned space. Always leave
enough space around the device for ventilation.

• Protect the device against direct sunlight, heat, large
temperature fluctuations, and moisture.

• When the device runs for a long period of time and the
surface becomes hot, shut it down and unplug the power
cord. Resume operation only after the device has cooled.

• Always handle the device with care. Avoid touching the lens.

• Never place heavy or sharp objects on the device or the
power cord.

• To avoid electric shock, do not disassemble.

• Only use attachments or accessories specied by the
manufacturer.

• Avoid extreme vibration. It may damage the internal
components.

• Do not allow children to handle the device without supervision.

• Under the following conditions, a layer of moisture can
appear inside the device which can lead to malfunctions: a)
if the device is moved from a cold to a warm area; b) after a
cold room is heated; c) when the device is placed in a damp
room. To avoid any moisture, seal the device in a plastic bag
before moving it to another room, and wait for one to two
hours before you take it out of the bag.

Power Supply

• Power off the device before removing the power supply from
the socket.

• Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point

where they exit from this device.

• Unplug this device if there are lightning storms or when
unused for a long period of time.

• Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.

• Before you make or change any connections, ensure that all
devices are disconnected from the power outlet.

• Never touch the power cable or the power connection with
wet hands.

Hearing Safety

• To avoid hearing damage, do not listen for extended periods
at high volume. Set the volume at a safe level.

Cleaning

• Power off the device and remove it from the power supply
before cleaning the surface.

• Use a soft, lint-free cloth. Never use liquid, gaseous, or easily
flammable cleansers (like sprays, abrasives, polishes, and
alcohol).

02 03

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 2-3 2018\11\8 星期四 15:46:01

English

English

• Do not use any liquid cleaning agents to clean the lens as
they may damage the protective coating on the lens.

• Wipe the surfaces gently. Be careful that you do not scratch
the surfaces.

• Use lens cleaning paper to clean the lens of this projector.

Repairs

• Do not make any repairs to the device yourself. Only have
your device repaired by an authorized service center.

• Improper maintenance can result in injuries or damage to
the device.

• Refer all servicing to qualied service personnel.

Class II equipment symbol

What’sIncluded

Main unit

Remote control

with batteries

This symbol indicates that the unit has a double insulation system.

Power cord Power adapter Manual

Laser Safety

Overview

CLASS 1

LASER PRODUCT

IEC 60825-1:2014. Complies with IEC 62471:2006 Risk Group 2.

Caution

• Possibly hazardous optical radiation emitted from this device.

• Do not stare at the operating beam. The bright light may hurt
your eyes.

04 05

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 4-5 2018\11\8 星期四 15:46:02

1. FrontView

3

1

4

2

5

Speaker / Air ventilation (inlet)

Lens cover
Air ventilation (outlet) button

Lens

• Rotate to adjust focus