EU Declaration of Conformity
Name of the Manufacturer
Anker Innovations Limited
Address of the Manufacturer
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan
Road, Mongkok, Kowloon, Hong Kong
EN 60335-2-2: 2010 + A11: 2012 + A1: 2013
EN 60335-1: 2012 + A11: 2014 + A13: 2017
EN 62233: 2008
EN 300 328 V2.1.1: 2016
EN 62311: 2008
Draft EN 301 489-1 V2.2.0: 2017
Draft EN 301 489-17 V3.2.0: 2017
EN 55014-1: 2017
EN 55014-2: 2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
IEC 62321-1: 2008
2014/53/EU
2011/65/EU and amendment (EU)2015/863
Title:
Compliance Manager
Version V1.0
We declare under our responsibility that the above referenced product complies with the following recognized
directives and standards, applicable in part or in whole:
I represent and warrant that: (i) I am a designated person of the manufacturer, (ii) I am responsible for the
regulatory compliance of the product (including with the requirements mentioned in Anker Innovations Limited and
this Declaration of Conformity) and (iii) the information I have provided in support of the safety and effectiveness
of the product to be true and accurate and do not contain any material omissions.