Angelcare Monitors AC417, AC517 User Manual
OWNER’S MANUAL
VIDEO, MOVEMENT
& SOUND MONITOR
Model AC417
AC517
FOR YOUR PEACE OF MIND
TABLE OF CONTENTS
WARNINGS ..................................................................................................................................................3
Operating elements ...........................................................................................................................................5
Delivery content ..................................................................................................................................................6
Camera Setup ......................................................................................................................................................7
Adhesive strips ....................................................................................................................................................7
Charging the Parent Unit .................................................................................................................................8
Powering the Camera ........................................................................................................................................8
Navigating the Parent Unit ..............................................................................................................................9
Positioning the Movement Sensor Pad .......................................................................................................9
Adjusting the Sensitivity of the Sensor Pad ............................................................................................10
Pausing/Restarting the Sensor Pad ...........................................................................................................10
Movement Monitoring ...................................................................................................................................... 11
Additional Information ..................................................................................................................................... 11
Troubleshooting ................................................................................................................................................ 12
Limited warranty ............................................................................................................................................... 13
Technical specifications .................................................................................................................................. 13
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE REFERENCE.
PLEASE READ THE WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING & USING THE
PRODUCT.
FAILURE TO FOLLOW THE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR
DEATH OR DAMAGES TO THE PRODUCT.
THE SENSOR PAD FEATURE IS NOT FOR USE WITH ADULTS, CHILDREN OR INFANTS OLDER THAN 24
MONTHS.
THE SENSOR PAD IS NOT INTENDED TO BE USED TO DETERMINE
IF A CHILD IS OUT OF THE CRIB.
WARNING
Adult assembly required.
Keep small parts away from children when assembling.
We, at Angelcare
®
, stand behind all of our products.
If you are not completely satisfied or have any questions,
United States and Canada: Please contact us at: angelcare@cdecinc.ca
Other countries: Please contact your local distributor.
FCC AND IC REGULATIONS
RF radiation exposure statement
The Nursery Unit complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Caution: To maintain the compliance with the FCC’s and Industry Canada’s RF exposure guideline, install
the Nursery Unit at least 20 cm from ALL persons. The transmitter of this device must not be co-located or
operating in conjunction with any other antenna or transmitter.
Industry Canada
This product meets the applicable Industry Canada technical specifications.
CAN ICES-3 (B)/NMB-3 (B)
2
1. T H I S P R O D U C T C A NNOT R E P LACE
RESPONSIBLE ADULT SUPERVISION. This product
is designed to aid in the monitoring of your child.
When using the monitor, you must still provide the
supervision necessary for the continued safety
of your child. Monitoring of premature babies,
or those considered to be at risk, should always
be carried out under the supervision of a health
professional. This monitor SHOULD NOT be used
as a medical device, nor as a device to prevent
Sudden Infant Death Syndrome (SIDS).
2.
WAR NI NG Stran gulation Hazard — Children
have STRANGLED in cords . Keep adapter cords
out of t he rea ch o f
ch il dren (more than 1
meter away). NEVER use
Sens or Pad(s) without
the pro t ecti ve cord
c o v e r i n g . C h e c k
protective cord covering
b e f o re e a c h u s e .
Immediately discontinue
use of Sensor Pad(s) if
protec tive c overing is
damaged or broken.
3. Never use extension cords with adapters. ONLY
use the adapters provided.
4. When an adapter is plugged into an electrical
outlet, DO NOT touch the exposed end.
5. ALWAYS be sure that both the transmitter and
receiver are working properly and are within range
of each other. Test the monitor before first use,
periodically and when changing location of the
Nurser y Unit.
6. ALWAYS be sure to immediately check on baby
whenever an alarm sounds.
7. DO NOT use monitor near water (such as bath
tub, sink, etc .).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
8. Keep monitor AWAY from heat sources (such
as stoves, radiators, etc.).
9. ALWAYS place both the Nursery Unit and the
Parent Unit on a flat surface in an upright position
and allow for proper ventilation. DO NOT place
on sofas, cushions, beds , etc. which may block
ventilation.
10. This monitor uses public airwaves to transmit
signals. The Parent Unit may pick up signals or
interference from other nursery monitors in your
area. Your monitor may even be picked up by
other households. To protect your privacy, make
sure both units are turned OFF when not in use. If
you experience interference, change the channel
on both units.
11. This pro duct is NOT a toy. DO N OT allow
children to play with it.
12. T his prod uc t contains s ma ll par ts . Adult
assembly required. Exercise care when unpacking
and assembling the product and keep small parts
away from children.
13. When using the monitor, the room temperature
should be between 10°C and 40°C.
BATTERY WARNING
14. D ang e r of exp los ion if b att e rie s a re
incorrectly replaced. The Parent Unit battery is a
replaceable Li-Ion battery. Only use the Angelcare
recommended replacement battery. In both units,
DO NOT mix old and new batteries. DO NOT mix
al kaline, standard or recharge ab le batteries.
Inser t batteries with correct polarity. DO NOT
short-circuit supply term inals. ON LY use th e
recommended batteries or equivalent (volts and
size) and the correct adapter. Remove batteries in
both units when product is stored for long periods
of time or when batteries are exhausted. Dispose
exhausted batteries properly. Keep all batteries
away from children.
15. IMPORTANT SAFETY INSTRUCTIONS
15.1 H ee d all warnings – All warnings on the
product and in the operating instructions should
be adhered to.
15.2 Follow all instructions – All operating and
use instructions should be followed.
15.3 Water and m oisture - DO NOT use this
apparatus near water. For example, near a bath
tub, wash bowl, kitchen sink, laundry tub, in a wet
environment or near a swimming pool and the
like. Care should be taken so that objects DO NOT
fall onto units and that liquids are not spilled into
either unit or Sensor Pad through its openings.
15.4 Cleani ng - Disconnec t all u ni ts b ef or e
cleaning. DO NOT immerse in water any part of
the monitor. Clean only with dry cloth.
15.5 Ventilation - DO NOT block any ventilation
openings. Allow for proper ventilation when units
are in use. DO NOT cover the Nursery Unit or the
Parent Unit with any object such as a blanket.
DO NOT place it in a drawer or in any location
which would mue the sound or interfere with
the normal flow of air.
15.6 Heat sources - DO NOT install near any heat
sources such as radiators, heat registers, stoves,
TVs or othe r apparatus (inc luding am plifiers)
that produce heat. Heat can damage the case or
electrical parts.
15.7 Power cord protection - Protect the Sensor
Pad cord and Adapter’s power cord from being
walked on or pinched by furniture or other items –
Power supply cords should be routed so that they
are not likely to be walked on or pinched by items
upon or against them, paying particular attention
to cords and plugs , convenience receptacle, and
th e point where they exit from the prod uc t.
Th e socket outlet shall be installed near the
equipment and shall be easily accessible. Make
sure to plug the ada pte r to the socket outle t
ne ar est to the equipment and that is easi ly
acces sible . To discon nect from mains, unplug
the adapter.
15.8 Acce sso rie s - Onl y u se a tta ch ments/
WARNINGS
3
E
N
accessories specifi ed by the manufactu rer. DO
NOT place this produc t on an uns table ca rt ,
stand, tripod, bracket or table. The product may
fall, causing serious injury to a child or adult and
serious damage to the product. Use ONLY with a
cart, stand, tripod, bracket or table recommended
by the manufacturer or sold with the product.
Any mounting of the product should follow the
manufacturer’s instructions.
15.9 Unplug this appliance during lightning storms
or when not used for long periods of time.
15.10 Servici ng - DO NOT attempt to service
this produ ct yo ursel f as opening or removing
covers (except battery door) may expose you to
dangerous voltage or other hazards.
15.11 Repla cement pa rt s - When replace me nt
parts are required, be sure the replacement parts
specifie d by the manufacturer have the sam e
characteristic as the original part. Unauthorized
substitution may result in fire, electric shock or
other hazards.
15.12 Usage - This baby monitor is intended as
an aid. It is NOT a substitute for responsible and
proper adult super vision and should not be used
as such. Use this appliance ONLY for its intended
use as described in this manual.
15.13 Power Sources - Operate this product only
from the type of power source indicated on the
type plate of the adaptor.
If you are unsure of the
type of power supply to your home, consult your
dealer or local power company.
15.14 Overlo ading - DO NOT ove rl oad wal l
outlets, extension cords or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
15.15 Object a nd Liquid Entry - N EV ER push
objects of a ny kind into this p roduc t through
casing slots as they may touch dangerous voltage
points or short out parts that could result in a risk
of fire or electric shock. NEVER spill liquid of any
kind on the product.
15.16 An te nn a - Th e antenn a us ed fo r th is
tr ansmitter mu st b e installed to provide a
separation distan ce of at l east 20 cm from all
persons and must not be collocated or operating in
conjunction with any other antenna or transmitter.
15.17 Power Lines - An outside antenna system
should NOT be located in the vicinity of overhead
power lines or other electric light or power circuit,
or where it can fall into such power lines or circuits
as contact with them may be fatal.
15.18 Vibration Source - When the monitor is
in use, DO NOT use a crib mobile or other crib
accessories that may produce vibrations. Other
sources of vibrations may include fans, washing
ma ch ines, loud music, etc. Th ese sources of
vibration may interfere with the performance of
your Angelcare
®
monitor and the alarm will not
sound if it continues to d etect any movement
other than your baby’s. Be sure all vibra tion
sources are eliminated before using the monitor.
You may experienc e false a la rms for seve ral
re aso ns . T he mos t c ommon reaso n i s the
Nurser y Unit has not be en tur ne d OFF after
you have removed your ba by from the crib.
Another rea so n is the S en sor Pad h as not
bee n p laced u nde r t he mat tr ess p ro perly.
Be sure the Sensor Pad is on a flat, firm surface
with the printed side facing up. The sensitivity
level may also need to be adjusted. Refer to Step
5.1 . Always be sure to immediately check on baby
whenever an alarm sounds.
15.19 Sensor Pad - Your Sensor Pad can be used
in any crib that i s s tationar y. If the crib has a
spring or slat base, place a hard board between
the crib base and the Senso r Pa d measuring
at lea st 33 x 33 cm and 6 mm thick. Only u se
your Angelcare
®
monitor in a stationary sleeping
environment such as a cri b whe re th e Sensor
Pad can rest on a completely flat, firm surface.
The sensor pad is made of plastic and does not
pe rmit the air to circulate. Therefo re, mil dew
build up could develop underneath the mattress
in the senso r pad area. We suggest rot ating
the m attress regularly to prevent any mildew.
16. I M P O R TA N T S A FETY I NSTRU C T I O N S
RELATED TO USE OF BATTERIES
16.1 U se O NLY the type and size of batteries
specified in the owner’s manual. There is a risk
of ex plosion if batteries are repla ced with a n
incorrect type.
16.2 Charge the battery for 9 hours prior to first
use. B e sure to h ave the monitor in the OFF
position during this period. ONLY use the adapters
included with your monitor.
16.3 DO NOT use these adapters with any other
equipments.
16.4 When unpluggi ng th e ad ap ter f rom the
Nurser y Unit, be sure it is switched to the OFF
position. If it isn’t, the unit will revert to battery
mode if batteries are installed.
16.5 DO NOT use rechargeable batteries in the
Nurser y Unit. Use alkaline batteries ONLY.
16.6 DO NOT dispose batteries in fire. They may
explode. Check with local regulations for possible
special disposal instructions.
16.7 Exercise care in handling batteries in order
not to short out the batteries with conducting
ma terials such a s rings, brac el ets a nd keys.
Overcharging, shor t circuiting, reverse charging,
mutilation, or incineration of batteries must be
avoided to prevent one or more of the following
occurrences: release of toxic materials, release of
hydrogen and/or oxygen, gas and rise in surface
temperature.
16.8 DO N OT a tt em pt to re ch arge b at te ri es
provide d with or identified for use with this
product th at are not intended to b e cha rged.
The batteries may leak corrosive electrolyte or
explode.
16.9 DO NOT attempt to rejuvenate the batteries
provide d with or identified for use with this
product by heating t hem. Sudden release of
battery electrolyte may occur, causing burns or
irritation to eyes or skin.
16.10 If and when necessary, the batteries must
be replaced with identical new ones or equivalent
(volts and size). If a battery to be replaced is
connected with other batteries in series, replace
the other batteries at the same time as well. DO
NOT mix old and new batteries.
16.11 Reverse polarity installation of the batteries
in the end produc t mus t be avoided. Reverse
inser tion of batteries can cause charging, and
4
that may result in leakage or explosion.
16.12 Remove batteries from both units if you store
the product over 30 days because the batteries
could leak and damage the product.
16.13 Discard ‘dead’ batteries as soon as possible
since ‘dead’ batteries are more likely to leak in a
product. If a battery has leaked or vented, it should
be replaced immediately using protective gloves.
16.14 DO NOT store this product, or the batteries
provide d with or identified for use with this
product, in high-temperature areas.
FCC WARNING
17. (North America Only)
17.1 Warning: Change s or modificatio ns to this
equipment not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
17.2 NOTE : T his equipment h as b ee n tested
and found to comply with part 15 of the FCC
Rules and the Industry Canada license -exempt
RS S standard(s). These li mits are designed to
provid e reasonable prote ction against harmful
interfere nce in a re sidential ins tallation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications .
17.3 Howev er, th ere is no g uar antee tha t
interfe re nce will not occ ur i n a p artic ul ar
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment OFF
and ON , the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an
outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
17.4 This device complies with the part 15 of the
FCC Rules and the In dustr y Cana da lice nse exempt RSS standards(s). Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Operating elements
Room
temperature
display
Micro USB
charging port
Power
On/Off
Power
On/Off
Sensor pad
pause
Micro USB
charging port
(on the side)
Volume
control +/-
(on the side)
Power indicator
Visual sound indicator
Rechargeable battery
compartment (on backside)
Folding stand (on backside)
Microphone
Parent unit Camera
5
E
N
Loading...