OWNER’S MANUAL
VIDEO, MOVEMENT & SOUND MONITOR
Model AC417
AC517
TABLE OF CONTENTS |
|
WARNINGS .................................................................................................................................................. |
3 |
Operating elements ........................................................................................................................................... |
5 |
Delivery content.................................................................................................................................................. |
6 |
Camera Setup ...................................................................................................................................................... |
7 |
Adhesive strips .................................................................................................................................................... |
7 |
Charging the Parent Unit ................................................................................................................................. |
8 |
Powering the Camera........................................................................................................................................ |
8 |
Navigating the Parent Unit.............................................................................................................................. |
9 |
Positioning the Movement Sensor Pad ....................................................................................................... |
9 |
Adjusting the Sensitivity of the Sensor Pad............................................................................................ |
10 |
Pausing/Restarting the Sensor Pad ........................................................................................................... |
10 |
Movement Monitoring ...................................................................................................................................... |
11 |
Additional Information..................................................................................................................................... |
11 |
Troubleshooting ................................................................................................................................................ |
12 |
Limited warranty............................................................................................................................................... |
13 |
Technical specifications.................................................................................................................................. |
13 |
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE REFERENCE.
PLEASE READ THE WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING & USING THE PRODUCT.
FAILURE TO FOLLOW THE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH OR DAMAGES TO THE PRODUCT.
THE SENSOR PAD FEATURE IS NOT FOR USE WITH ADULTS, CHILDREN OR INFANTS OLDER THAN 24 MONTHS.
THE SENSOR PAD IS NOT INTENDED TO BE USED TO DETERMINE
IF A CHILD IS OUT OF THE CRIB.
WARNING
Adult assembly required.
Keep small parts away from children when assembling.
We, at Angelcare®, stand behind all of our products.
If you are not completely satisfied or have any questions,
United States and Canada: Please contact us at: angelcare@cdecinc.ca
Other countries: Please contact your local distributor.
FCC AND IC REGULATIONS
RF radiation exposure statement
The Nursery Unit complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Caution: To maintain the compliance with the FCC’s and Industry Canada’s RF exposure guideline, install the Nursery Unit at least 20 cm from ALL persons. The transmitter of this device must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada
This product meets the applicable Industry Canada technical specifications.
CAN ICES-3 (B)/NMB-3 (B)
2
WARNINGS
1.T H I S P R O D U C T C A N N OT R E P L AC E RESPONSIBLE ADULT SUPERVISION. This product is designed to aid in the monitoring of your child. When using the monitor, you must still provide the supervision necessary for the continued safety of your child. Monitoring of premature babies, or those considered to be at risk, should always be carried out under the supervision of a health professional. This monitor SHOULD NOT be used as a medical device, nor as a device to prevent Sudden Infant Death Syndrome (SIDS).
2.WARNING Strangulation Hazard — Children have STRANGLED in cords. Keep adapter cords
out of the reach of children (more than 1 meter away). NEVER use Sensor Pad(s) without
the protective cord
c o v e r i n g . C h e c k protective cord covering b e f o r e e a c h u s e . Immediately discontinue use of Sensor Pad(s) if protective covering is
damaged or broken.
3.Never use extension cords with adapters. ONLY use the adapters provided.
4.When an adapter is plugged into an electrical outlet, DO NOT touch the exposed end.
5.ALWAYS be sure that both the transmitter and receiver are working properly and are within range of each other. Test the monitor before first use, periodically and when changing location of the Nursery Unit.
6.ALWAYS be sure to immediately check on baby whenever an alarm sounds.
7.DO NOT use monitor near water (such as bath tub, sink, etc.).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
8.Keep monitor AWAY from heat sources (such as stoves, radiators, etc.).
9.ALWAYS place both the Nursery Unit and the Parent Unit on a flat surface in an upright position and allow for proper ventilation. DO NOT place on sofas, cushions, beds, etc. which may block ventilation.
10.This monitor uses public airwaves to transmit signals. The Parent Unit may pick up signals or interference from other nursery monitors in your area. Your monitor may even be picked up by other households. To protect your privacy, make sure both units are turned OFF when not in use. If you experience interference, change the channel on both units.
11.This product is NOT a toy. DO NOT allow children to play with it.
12.This product contains small parts. Adult assembly required. Exercise care when unpacking
E
N
and assembling the product and keep small parts away from children.
13. When using the monitor, the room temperature should be between 10°C and 40°C.
BATTERY WARNING
14.Danger of explosion if batteries are incorrectly replaced. The Parent Unit battery is a replaceable Li-Ion battery. Only use the Angelcare recommended replacement battery. In both units, DO NOT mix old and new batteries. DO NOT mix alkaline, standard or rechargeable batteries. Insert batteries with correct polarity. DO NOT short-circuit supply terminals. ONLY use the recommended batteries or equivalent (volts and size) and the correct adapter. Remove batteries in both units when product is stored for long periods of time or when batteries are exhausted. Dispose exhausted batteries properly. Keep all batteries away from children.
15.IMPORTANT SAFETY INSTRUCTIONS
15.1Heed all warnings – All warnings on the product and in the operating instructions should be adhered to.
15.2Follow all instructions – All operating and use instructions should be followed.
15.3Water and moisture - DO NOT use this apparatus near water. For example, near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet environment or near a swimming pool and the like. Care should be taken so that objects DO NOT fall onto units and that liquids are not spilled into either unit or Sensor Pad through its openings.
15.4Cleaning - Disconnect all units before cleaning. DO NOT immerse in water any part of the monitor. Clean only with dry cloth.
15.5Ventilation - DO NOT block any ventilation openings. Allow for proper ventilation when units are in use. DO NOT cover the Nursery Unit or the Parent Unit with any object such as a blanket. DO NOT place it in a drawer or in any location which would mume the sound or interfere with the normal flow of air.
15.6Heat sources - DO NOT install near any heat sources such as radiators, heat registers, stoves, TVs or other apparatus (including amplifiers) that produce heat. Heat can damage the case or electrical parts.
15.7Power cord protection - Protect the Sensor Pad cord and Adapter’s power cord from being walked on or pinched by furniture or other items – Power supply cords should be routed so that they are not likely to be walked on or pinched by items upon or against them, paying particular attention to cords and plugs, convenience receptacle, and the point where they exit from the product. The socket outlet shall be installed near the equipment and shall be easily accessible. Make sure to plug the adapter to the socket outlet nearest to the equipment and that is easily accessible. To disconnect from mains, unplug the adapter.
15.8Accessories - Only use attachments/
3
accessories specified by the manufacturer. DO NOT place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult and serious damage to the product. Use ONLY with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer’s instructions.
15.9Unplug this appliance during lightning storms or when not used for long periods of time.
15.10Servicing - DO NOT attempt to service this product yourself as opening or removing covers (except battery door) may expose you to dangerous voltage or other hazards.
15.11Replacement parts - When replacement parts are required, be sure the replacement parts specified by the manufacturer have the same characteristic as the original part. Unauthorized substitution may result in fire, electric shock or other hazards.
15.12Usage - This baby monitor is intended as an aid. It is NOT a substitute for responsible and proper adult supervision and should not be used as such. Use this appliance ONLY for its intended use as described in this manual.
15.13Power Sources - Operate this product only from the type of power source indicated on the type plate of the adaptor. If you are unsure of the type of power supply to your home, consult your dealer or local power company.
15.14Overloading - DO NOT overload wall outlets, extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock.
15.15Object and Liquid Entry - NEVER push objects of any kind into this product through casing slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. NEVER spill liquid of any kind on the product.
15.16Antenna - The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
15.17Power Lines - An outside antenna system should NOT be located in the vicinity of overhead power lines or other electric light or power circuit, or where it can fall into such power lines or circuits as contact with them may be fatal.
15.18Vibration Source - When the monitor is in use, DO NOT use a crib mobile or other crib accessories that may produce vibrations. Other sources of vibrations may include fans, washing machines, loud music, etc. These sources of vibration may interfere with the performance of your Angelcare® monitor and the alarm will not sound if it continues to detect any movement other than your baby’s. Be sure all vibration sources are eliminated before using the monitor. You may experience false alarms for several reasons. The most common reason is the Nursery Unit has not been turned OFF after you have removed your baby from the crib. Another reason is the Sensor Pad has not been placed under the mattress properly. Be sure the Sensor Pad is on a flat, firm surface with the printed side facing up. The sensitivity
level may also need to be adjusted. Refer to Step 5.1. Always be sure to immediately check on baby whenever an alarm sounds.
15.19 Sensor Pad - Your Sensor Pad can be used in any crib that is stationary. If the crib has a spring or slat base, place a hard board between the crib base and the Sensor Pad measuring at least 33 x 33 cm and 6 mm thick. Only use your Angelcare® monitor in a stationary sleeping environment such as a crib where the Sensor Pad can rest on a completely flat, firm surface. The sensor pad is made of plastic and does not permit the air to circulate. Therefore, mildew build up could develop underneath the mattress in the sensor pad area. We suggest rotating the mattress regularly to prevent any mildew.
16. I M P O R TANT SAF E T Y I N STR U C TIO N S RELATED TO USE OF BATTERIES
16.1Use ONLY the type and size of batteries specified in the owner’s manual. There is a risk of explosion if batteries are replaced with an incorrect type.
16.2Charge the battery for 9 hours prior to first use. Be sure to have the monitor in the OFF position during this period. ONLY use the adapters included with your monitor.
16.3DO NOT use these adapters with any other equipments.
16.4When unplugging the adapter from the Nursery Unit, be sure it is switched to the OFF position. If it isn’t, the unit will revert to battery mode if batteries are installed.
16.5DO NOT use rechargeable batteries in the Nursery Unit. Use alkaline batteries ONLY.
16.6DO NOT dispose batteries in fire. They may explode. Check with local regulations for possible special disposal instructions.
16.7Exercise care in handling batteries in order not to short out the batteries with conducting materials such as rings, bracelets and keys. Overcharging, short circuiting, reverse charging, mutilation, or incineration of batteries must be avoided to prevent one or more of the following occurrences: release of toxic materials, release of hydrogen and/or oxygen, gas and rise in surface temperature.
16.8DO NOT attempt to recharge batteries provided with or identified for use with this product that are not intended to be charged. The batteries may leak corrosive electrolyte or explode.
16.9DO NOT attempt to rejuvenate the batteries provided with or identified for use with this product by heating them. Sudden release of battery electrolyte may occur, causing burns or irritation to eyes or skin.
16.10If and when necessary, the batteries must be replaced with identical new ones or equivalent (volts and size). If a battery to be replaced is connected with other batteries in series, replace the other batteries at the same time as well. DO NOT mix old and new batteries.
16.11Reverse polarity installation of the batteries in the end product must be avoided. Reverse insertion of batteries can cause charging, and
4
that may result in leakage or explosion.
16.12Remove batteries from both units if you store the product over 30 days because the batteries could leak and damage the product.
16.13Discard ‘dead’ batteries as soon as possible since ‘dead’ batteries are more likely to leak in a product. If a battery has leaked or vented, it should be replaced immediately using protective gloves.
16.14DO NOT store this product, or the batteries provided with or identified for use with this product, in high-temperature areas.
FCC WARNING
17. (North America Only)
17.1Warning: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
17.2NOTE: This equipment has been tested and found to comply with part 15 of the FCC Rules and the Industry Canada license-exempt RSS standard(s). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
17.3 However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit diperent from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
17.4 This device complies with the part 15 of the FCC Rules and the Industry Canada license - exempt RSS standards(s). Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
E N
Operating elements
Power |
Power indicator |
|
|
On/Off |
Visual sound indicator |
Microphone
Volume control +/-
(on the side)
Micro USB charging port
(on the side)
Folding stand (on backside)
Rechargeable battery compartment (on backside)
Parent unit
Power |
Sensor pad |
On/Off |
pause |
Micro USB |
|
|
|
|
|
|
|
|
|
|
|
Room |
||
|
||||
charging port |
|
temperature |
||
|
|
|
display |
|
Camera
5
Loading...