Angelcare Monitors AC403 User Manual
FOR YOUR PEACE OF MIND
OWNER’S MANUAL
MOVEMENT & SOUND MONITOR
Model AC403
Pre-programmed
to monitor sound
and movement.
Sensor Pad will alarm
if no movement
is detected.
EN
2
01mf3_User_guide_AC403_12001_NA.indd 1 2013-12-19 5:03 PM
FR
29
ES
59
TABLE OF CONTENT
Warnings ..................................................................................................... 3
AC403 SETUP REQUIREMENTS .......................................................7
STEP 1 - Charge Parent Unit ............................................................. 8
STEP 2 - Install Sensor Pad ..............................................................10
STEP 3 - Setup Nursery Unit ............................................................. 11
STEP 4 - Turn on your Monitor ........................................................ 12
STEP 5 - Test and get to know your Monitor ............................ 14
STEP 6 - Activate and deactivate additional functions ....... 22
Troubleshooting .....................................................................................23
Warranty .................................................................................................. 25
Technical specifications .....................................................................26
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE REFERENCE.
PLEASE READ THE WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLING & USING THE PRODUCT.
FAILURE TO FOLLOW THE WARNINGS AND THE INSTRUCTIONS COULD RESULT
IN SERIOUS INJURY OR DEATH OR DAMAGES TO THE PRODUCT.
THE SENSOR PAD FEATURE IS NOT FOR USE WITH ADULTS, CHILDREN OR INFANTS
OLDER THAN 24 MONTHS.
WARNING
Adult assembly required.
Keep small parts away from children when assembling.
We, at Angelcare
If you are not completely satisfied or have any questions,
United States and Canada: please contact us at: anglecare@cdecinc.ca
Other countries: please contact your local Distributor.
2
®
, stand behind all of our products.
WARNING
E
N
1. THIS PRODUCT CANNOT REPLACE RE-
SPONSIBLE ADULT SUPERVISION. This
product is designed to aid in the monitoring
of your child. When using the monitor, you
must still provide the supervision necessary
for the continued safety of your child. Monitoring of premature babies, or those considered to be at risk, should always be carried
out under the supervision of a health professional. This monitor is not intended to be
used as a medical monitor.
STRANGULATION HAZARD—
2.
Children have
Keep adapter cords out of the reach of
children (more than 3 feet (0.9 m) away)
STRANGLED in cords.
NEVER attempt to use Sensor Pad
without the protective cord covering. Check
protective cord covering before each use to
3. Never use extension cords with AC adapters. ONLY use the AC adapters provided.
When an AC Adapter is plugged into an
4.
electrical outlet, DO NOT touch the exposed
end.
5. ALWAYS be sure that both the transmitter and receiver are working properly and are
within range of each other. Test monitor before first use, periodically and when changing
location of the Nursery Unit.
6. ALWAYS be sure to immediately check on
baby whenever an alarm sounds.
7. DO NOT use monitor near water (such as
bath tub, sink, etc.).
ensure it is securely
placed under the leg
of the crib. Discontinue use of Sensor Pad
if protective covering
is damaged or broken.
8. Keep monitor AWAY from heat sources
(such as stoves, radiators, etc.).
ALWAYS place both the Nursery Unit and
9.
Parent Unit on a flat surface in an upright
position and allow for proper ventilation.
DO NOT place on sofas, cushions, beds, etc.
which may block ventilation.
10. This monitor uses public airwaves to
transmit signals. The Parent Unit may pick
up signals or interference from other nursery
monitors in your area. Your monitor may even
be picked up by other households. To protect
your privacy, make sure both units are turned
OFF when not in use. If you experience interference, change the channel on both units.
11. This product is NOT a toy. DO NOT allow
children to play with it.
12. This product contains small parts. Adult
assembly required. Exercise care when unpacking and assembling the product and
keep small parts away from children.
13. Use and store the monitor at a temperature between 50°F (10°C) and 104°F (40°C).
BATTERY WARNING
14. Use ONLY AAA RECHARGEABLE batter-
ies for the Parent Unit. DO NOT mix old and
new batteries. DO NOT mix alkaline, standard
or rechargeable batteries. Insert batteries
with correct polarity. DO NOT short-circuit
supply terminals. ONLY use the recommended batteries or equivalent (volts and size) and
the correct adapter. Remove batteries when
product is stored for long periods of time or
when batteries are exhausted. Dispose exhausted batteries properly. DO NOT recharge
non-rechargeable batteries. Rechargeable
batteries are ONLY to be charged under adult
supervision. Keep all batteries away from children.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
3
IMPORTANT SAFETY INSTRUCTIONS
15.1 Read these instructions - All the safety
instructions should be read before the product is operated.
15.2 Keep these instructions. The safety and
operating instructions should be retained for
future reference.
15.3 Heed all warnings – All warnings on the
product and in the operating instructions
should be adhered to.
15.4 Follow all instructions – All operating and
use instructions should be followed.
15.5 Water and moisture - DO NOT use this
apparatus near water. For example, near a
bath tub, wash bowl, kitchen sink, laundry
tub, in a wet environment or near a swimming
pool and the like. Care should be taken so
that objects DO NOT fall onto units and that
liquids are not spilled into either unit or Sensor Pad through its openings.
15.6 Cleaning - Disconnect all units before
cleaning. DO NOT immerse in water any part
of the Nursery Unit, Parent Unit. Clean only
with dry cloth. DO NOT spray with cleaning
products or solvents. Wipe Sensor Pad with a
cloth moistened very slightly with an antiseptic or mild detergent.
15.7 Ventilation - DO NOT block any ventilation openings. Allow for proper ventilation
when units are in use. DO NOT cover the
Nursery Unit or Parent Unit with any object
such as a blanket. DO NOT place it in a drawer or in any location which would muffle the
sound or interfere with the normal flow of air.
15.8 Heat sources - DO NOT install near any
heat sources such as radiators, heat registers,
stoves, TVs or other apparatus (including amplifiers) that produce heat. Heat can damage
the case or electrical parts.
15.9 Power cord protection - Protect the Sensor Pad cord and Adapter’s power cord from
being walked on or pinched by furniture or
other items – Power supply cords should be
routed so that they are not likely to be walked
on or pinched by items upon or against them,
paying particular attention to cords and
plugs, convenience receptacle, and the point
where they exit from the product.
15.10 Accessories - Only use attachments/accessories specified by the manufacturer. DO
NOT place this product on an unstable cart,
stand, tripod, bracket or table. The product
may fall, causing serious injury to a child or
adult and serious damage to the product.
Use ONLY with a cart, stand, tripod, bracket
or table recommended by the manufacturer
or sold with the product. Any mounting of
the product should follow the manufacturer’s
instructions.
15.11 Unplug this appliance during lightning
storms or when not used for long periods of
time.
15.12 Servicing - DO NOT attempt to service
this product yourself as opening or removing
covers (except battery doors) may expose
you to dangerous voltage or other hazards.
15.13 Replacement parts - When replacement
parts are required, be sure the replacement
parts specified by the manufacturer have
the same characteristic as the original part.
Unauthorized substitution may result in fire,
electric shock or other hazards.
15.14 Usage - This baby monitor is intended
as an aid. It is NOT a substitute for responsible
and proper adult supervision and should not
be used as such. Use this appliance ONLY for
its intended use as described in this manual.
15.15 Power Sources - Operate this product
only from the type of power source indicated
on the type plate of the adaptor.
unsure of the type of power supply to your
If you are
home, consult your dealer or local power
company.
15.16 Overloading - DO NOT overload wall
outlets, extension cords or integral convenience receptacles as this can result in a risk
of fire or electric shock.
15.17 Object and Liquid Entry - NEVER push
objects of any kind into this product through
casing slots as they may touch dangerous
voltage points or short out parts that could
result in a risk of fire or electric shock. NEVER
spill liquid of any kind on the product.
15.18 Antenna - The antenna used for this
transmitter must be installed to provide a
separation distance of at least 20 cm (7.9”)
from all persons and must not be collocated
or operating in conjunction with any other
antenna or transmitter.
15.19 Power Lines - An outside antenna system should NOT be located in the vicinity of
overhead power lines or other electric light
or power circuit, or where it can fall into such
power lines or circuits as contact with them
may be fatal.
4
15.20 STRANGULATION HAZ-
ARD—Children have STRANGLED in
cords. Keep adapter cords out of the reach of
children (more than 3 feet (0.9 m) away)
NEVER attempt to use Sensor Pad
without the protective cord covering. Check
protective cord covering before each use
15.21 Interference - This monitor uses public
airwaves to transmit signals. The Parent Unit
may pick up signals or interference from other nursery monitors in your area. Your monitor may even be picked up by other households. To protect your privacy, make sure
both units are turned OFF when not in use.
If you experience interference, change the
channel on both units.
15.22 Vibration Source - When the monitor
is in use, DO NOT use a crib mobile or other
crib accessories that may produce vibrations.
Other sources of vibrations may include fans,
washing machines, loud music, etc. These
sources of vibration may interfere with the
performance of your Angelcare
the alarm will not sound if it continues to detect any movement other than your baby’s.
Be sure all vibration sources are eliminated
before using the monitor.
You may experience false alarms for several
reasons. The most common reason is the
Nursery Unit has not been turned OFF after
you have removed your baby from the crib.
Another reason is the Sensor Pad has not
been placed under the mattress properly.
Be sure the Sensor Pad is on a flat, firm surface with the printed side facing up. The sensitivity level may also need to be adjusted.
Refer to step 5.3. Always be sure to immediately check on baby whenever an alarm
sounds.
15.23 Sensor Pad - Your Sensor Pad can be
used in any crib that is stationary and designed to safely hold a baby. If the crib has
a spring or slat base, place a hard board between the crib base and the Sensor Pad measuring at least 13” x 13” (33 x 33 cm) and 1/4
inch (6 mm) thick. Only use your Angelcare
monitor in a stationary sleeping environment
such as a crib where the Sensor Pad can rest
on a completely flat, firm surface.
to ensure it is securely
placed under the leg
of the crib.Discontinue
use of Sensor Pad if
protective covering is
damaged or broken.
®
monitor and
®
IMPORTANT SAFETY INSTRUCTIONS
RELATED TO USE OF BATTERIES
16.1 Use ONLY the type and size of batter-
ies specified in the owner’s manual. There is a
risk of explosion if batteries are replaced with
an incorrect type.
16.2 Use ONLY AAA rechargeable batteries and/or the AC Adapters provided for the
Parent Unit. You must use only rechargeable
batteries in the Parent Unit. DO NOT use alkaline batteries or you will severely damage
the unit.
16.3 Charge the batteries for 15 hours prior to
first use. Be sure to have the monitor in the
OFF position during this period. ONLY use
the AC Adapters included with your monitor.
16.4 DO NOT use these adapters with any
other equipments.
16.5 When unplugging the AC Adapter from
the Nursery Unit, be sure it is switched to the
OFF position. If it isn’t, the unit will revert to
battery mode if batteries are installed.
16.6 DO NOT use rechargeable batteries in
the Nursery Unit. Use alkaline batteries ONLY.
16.7 DO NOT dispose batteries in fire. They
may explode. Check with local regulations for
possible special disposal instructions.
16.8 Exercise care in handling batteries in order not to short out the batteries with conducting materials such as rings, bracelets and
keys. Overcharging, short circuiting, reverse
charging, mutilation, or incineration of batteries must be avoided to prevent one or more
of the following occurrences: release of toxic
materials, release of hydrogen and/or oxygen
gas, rise in surface temperature.
16.9 DO NOT attempt to recharge batteries
provided with or identified for use with this
product that are not intended to be charged.
The batteries may leak corrosive electrolyte
or explode.
16.10 DO NOT attempt to rejuvenate the batteries provided with or identified for use with
this product by heating them. Sudden release
of battery electrolyte may occur, causing
burns or irritation to eyes or skin.
E
N
5
16.11 If and when necessary, the batteries
must be replaced with identical new ones or
equivalent (volts and size). If a battery to be
replaced is connected with other batteries in
series, replace the other batteries at the same
time as well. DO NOT mix old and new bat teries.
16.12 Reverse polarity installation of the bat teries in the end product must be avoided.
Reverse insertion of batteries can cause
charging, and that may result in leakage or
explosion.
16.13 Remove batteries from this product if
you store the product over 30 days because
the batteries could leak and damage the
product.
16.14 Discard ‘dead’ batteries as soon as pos sible since ‘dead’ batteries are more likely to
leak in a product. If a battery has leaked or
vented, it should be replaced immediately us ing protective gloves.
16.15 DO NOT store this product, or the bat teries provided with or identied for use with
this product, in high-temperature areas.
WARNING
(North America Only)
17.1 Modications not authorized by the man -
ufacturer may void users authority to operate
this device.
17.2 NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to
provide reasonable protection against harm ful interference in a residential installation.
This equipment generates, uses and can ra diate radio frequency energy and, if not in stalled and used in accordance with the in structions, may cause harmful interference to
radio communications.
17.3 However, there is no guarantee that in terference will not occur in a particular instal lation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment OFF and ON, the user is encour aged to try to correct the interference by one
or more of the following measures:
t Reorient or relocate the receiving
antenna.
t Increase the separation between
the equipment and receiver.
t Connect the equipment into an
outlet on a circuit dierent from that
to which the receiver is connected.
t Consult the dealer or an experienced
radio/TV technician for help.
17.4 This device complies with part 15 of the
FCC Rules. Operation is subject to the follow ing two conditions:
(1) This device may not cause harmful inter ference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
FCC AND IC REGULATIONS
RF radiation exposure statement
The Nursery Unit complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. Caution: To maintain the compliance with the FCC’s RF exposure guideline, install
the Nursery Unit at least 20cm from nearby baby and persons.
Industry Canada
This product meets the applicable Industry Canada technical specications.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept
interference that may cause undesired operation of the device.
6
SETUP REQUIREMENTS
Cove
Cove
to
run
g
Cover 3
ouble
sided
t
under
crib
leg
C
g
f
INCLUDED:
Parent Unit(s)
1
Sensor Pad
23
Nursery Unit
45 6
MOVEMENT &
SOUND MONITOR
Model AC403
2X
2 AC Adapters (AC403) or
3 AC Adapters (AC403-2P
Cover 1: Under the mattress
Cover 2: Vertical stick to run
parallel to le
parallel to leg
Cover 3: Double sided taped
tofi
to fit under crib leg
over 4,5,6: Coverstorun alon
Cover 4,5,6: Covers to run along
loor
floor
3X
3 Rechargeable AAA
Batteries (AC403) or
6 Rechargeable AAA
Batteries (AC403-2P)
r 1:Under the mattress
r 2:Vertical stick
: D
taped
E
N
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 6 mm (1/4’’)
Minimum dimensions:
33 cm (13’’) x 33 cm (13’’)
Maximum dimensions:
equal to the mattress size
IMPORTANT
The hardboard must be larger than
the Sensor Pad(s) surface area.
BABY’S ROOM:
1
2
WHAT YOU WILL NEED (NOT INCLUDED):
4X
4 AAA Alkaline
Batteries
for Nursery Unit
IMPORTANT
Place the crib near a supporting wall and
far from air currents. Install the Nursery
Unit on a flat, stable surface facing the crib
at a distance of at least 1 meter (3 feet).
IMPORTANT
Keep
at least
36in
3
45 6
Miniature Phillips
Screwdriver
7
STEP 1 - CHARGE PARENT UNIT (15 HOURS)
1
2 3
15
1.1 - BATTERIES
HOW TO CHECK THE BATTERIES:
Unplug the AC Adapters from both units.
• If the Nursery Unit Power Indicator
does not show or if the Low Battery
Indicator does show, replace
the batteries.
• If the Parent Unit screen does not
light up or it switches off, recharge
the batteries.
IMPORTANT
Never use regular
alkaline batteries
in the Parent Unit;
they may explode.
1) Remove the battery cover and insert
the Rechargeable Batteries (included).
2) Connect the AC Adapter to the Parent
Unit and into an electrical outlet.
3) Charge the unit for 15 continuous hours
(prior to first use).
NOTE:
To optimize your battery performance please
refer to Battery Guidelines in the Trouble
Shooting section.
The Power Indicator
on the Nursery Unit
The Low Battery Indicator
on the Nursery Unit
PARENT UNIT BATTERY ALARM
• Alarm activates when batteries need to be recharged.
• Parent Unit will emit a beep sound every 15 seconds.
• Battery Alarm icon will show on screen.
8
HOW TO CHARGE THE BATTERIES
IN THE PARENT UNIT:
Plug the AC into the Parent Unit and
a working electrical outlet. Your Parent
Unit can function with the batteries
at 1/2 capacity but it is recommended
that they are fully charged before
unplugging from the AC Adaptor
and power outlet for maximum use.
empty 1/2 full full
PARENT UNIT:
E
N
A
B
C
D
Front View Rear View
G
E
F
H
I
A) LCD Screen
B) Power ON/OFF
C) MENU Button
D) Channel Button
E) Sound Volume
UP/DOWN and HOLD
F) Speaker
G) Belt Clip
H) Battery Cover
I) AC Adapter Outlet
9
Loading...