Angelcare Monitors AC301-R, AC301 User Manual

ManAC301 angl-fra 14 july06.qxd 7/14/06 9:29 AM Page 1

Digital 2.4GHz
Movement & Sound Monitor
Movement & Sound Monitor (Rechargeable)

Numérique 2.4 GHz
Moniteur de mouvements et sons
Moniteur de mouvements et sons (Rechargeable)

AC301

AC301-R

ManAC301 angl-fra 14 july06.qxd 7/14/06 9:29 AM Page 2

IMPORTANT NOTICE

IN RANGE FUNCTION

The in range function is DEACTIVATED when turning on the monitor (See instructions).

AC301 - RECHARGEABLE

Only use RECHARGEABLE batteries in the parents unit.

DIGITAL CODING SYSTEM

This monitor is equipped with a digital coding system which eliminates interferences. The
codes are written on the box and in the battery compartment. For use of 2 Angelcare
movement and sound monitor in same household or when interferences occur with an
Angelcare in another household, ensure the 2 monitors have 2 different digital coding
system

USE OF THE ANGELCARE MONITOR WITH 2 SENSOR PADS

Connect the two sensor pads using the shorter wires. Position sensor pads as illustrated
below. If you are using a bassinette or a small crib, position the one sensor pad with 2
cords in the middle of the crib under the mattress. Connect the long sensor pad cord to
the nursery unit. The printed side of sensor pads MUST be face up. DO NOT tuck thick
bedding under the edges of the mattress.

POSITION OF SENSOR PADS UNDER MATTRESS

MIDDLE OF THE CRIB

USE OF THE ANGELCARE MONITOR WITH 2 PARENT UNITS

Make sure all 3 units (the 2 parent units and the nursery unit) are on the same channel
either A, B or C.

2