Andis AGS User Manual

Item pictured may differ from actual product

El artículo ilustrado puede diferir del producto real

Il est possible que l’article sur la photo soit différent du produit réel

Use & Care Instructions

AGS

ENGLISH

Please read the following instructions before using your new Andis
clipper. Give it the care that a fine precision built instrument deserves
and it will give you years of service.

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should
always be followed, including the following: Read all

instructions before using the Andis clipper.

DANGER:

1. Do not reach for an appliance that has fallen into water.
Unplug immediately.

2. Do not use while bathing or in a shower.

3. Do not place or store appliance where it can fall or be
pulled into a tub or sink. Do not place in or drop into
water or other liquid.

4. Always unplug this appliance from the electrical outlet
immediately after using.

5. Unplug this appliance before cleaning, removing or
assembling parts.

To reduce the risk of electric shock:

WARNING: To reduce the risk of burns, fire,

electric shock, or injury to persons:

1. An appliance should never be left unattended when
plugged in.

2. Close supervision is necessary when this appliance is used
by, on or near children or individuals with certain disabilities.

3. Use this appliance only for its intended use as described
in this manual. Do not use attachments not recommended
by Andis.

4. Never operate this appliance if it has a damaged cord or
plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Return the appliance
to an Andis Authorized Service Station for examination
and repair.

2

5. Keep the cord away from heated surfaces.

6. Never drop or insert any object into any opening.

7. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.

8. Do not use this appliance with a damaged or broken
blade or comb, as injury to the skin may occur.

9. To disconnect turn control to “off” then remove plug from
outlet.

10. WARNING: During use, do not place or leave appliance
where it may be (1) damaged by an animal or (2) exposed
to the weather.

SAVE THESE INSTRUCTIONS

THIS PRODUCT INTENDED FOR PROFESSIONAL USE

To reduce the risk of electric shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install the proper outlet. Do not
change the plug in any way.

OPERATING INSTRUCTIONS

Plug cord into electrical outlet, operate at 120 volt, 60 cycle AC electrical
current or as noted on the unit. To start clipper, move switch button to ON
position. To stop clipper, move switch button back to original position. After
using your clipper, rewrap cord and store in a safe place.

REMOVING BLADE SET

To remove blade set, first make sure your clipper motor is switched “OFF”. Push
blade release mechanism under blade hinge (Figure A). While holding down the
blade release mechanism, push down on blade, then gently pull the blade
forward (Figure B), and slide it off the blade hinge. If your blade hinge should
snap closed and is flush with the clipper, use a small standard screwdriver to pry
the tongue of the hinge out (Figure C). NOTE: Hair may accumulate in the front
cavity of the housing under the blade. If this happens, you can clean out the hair
by brushing out the cavity with a small brush or an old toothbrush while the
blade is off the clipper.

3

REPLACING OR CHANGING BLADE SET

To replace or change your blade set, slide the blade bracket onto the hinge
of the clipper (Figure D) and with the clipper turned ON, push the blade
towards the clipper to lock into position.

USER MAINTENANCE

The internal mechanism of your motor clipper has been permanently
lubricated by the factory. Other than the recommended maintenance
described in this manual, no other maintenance should be performed,
except by Andis Company, or an Andis Authorized Service Station. To find

an Andis Authorized Service Station near you log on to www.andis.com
or contact our customer service department: 1-800-558-9441 (U.S.) or
1-800-335-4093 (Canada).

BLADE TEMPERATURE

Due to the high speed nature of Andis clippers, please check for blade heat
often, especially on close cutting blades. If blades are too hot, dip the
blades only into Andis Blade Care Plus or apply Andis Cool Care Plus and
then Andis Clipper Oil. If you have a detachable blade unit, you can change
your blade in order to maintain a comfortable temperature; using multiple
blades of the same size is popular among groomers.

A

D

4

B C

E F

CARE AND SERVICING OF YOUR ANDIS CLIPPER BLADES

Blades should be oiled before, during, and after each use. If your clipper
blades leave streaks or slow down, it’s a sure sign blades need oil. Place a
few drops of Andis Clipper Oil on the front and side of the cutter blades
(Figure E). Wipe excess oil off blades with a soft dry cloth. Spray lubricants
contain insufficient oil for good lubrication, but are an excellent clipper
blade coolant. Always replace broken or nicked blades to prevent injury. You
can clean the excess hair from your blades by using a small brush or worn
out tooth brush. To clean the blades we suggest to immerse the blades
only into a shallow pan of Andis Blade Care Plus, while the clipper is
running. Any excess hair and dirt that has accumulated between the blades
should come out. After cleaning, turn your clipper OFF and dry blades with
a dry cloth and start clipping again.

If upon cleaning your blades you find that the blades will still not cut, there
may be a few fine pieces of hair trapped between the upper and lower
blade. If this happens, you will need to snap the blade off the clipper.
Proceed to slide the upper blade to one side, without loosening the tension
spring or moving the upper blade completely out from under the tension
spring (See Figure F for position of blade). Wipe the surface between the
blades clean with a dry cloth, then place a drop of clipper oil where the
upper and lower blades meet and also in the guide slot of the tension
spring (Figure F). Now slide the upper blade to the opposite side of the
lower blade and repeat this process. After completing this procedure, slide
the upper blade, centering it over the lower blade. Handle or store your
Andis Clipper with the blades down so excess oil will not run into the
clipper case.

FACTORY REPAIR SERVICE

When the blades of your Andis clipper become dull after repeated use,
it is advised to purchase a new set of blades available through your Andis
supplier or through an Andis Authorized Service Station. Some blade
sets can be resharpened–contact Andis Company for information on
resharpening. To find an Andis Authorized Service Station near you log

on to www.andis.com or contact our customer service department:
1-800-558-9441 (U.S.) or 1-800-335-4093 (Canada).

Caution: Never handle your Andis clipper while you are operating a water

faucet, and never hold your clipper under a water faucet or in water. There
is danger of electrical shock and damage to your clipper. Andis Company

will not be responsible in case of injury due to this carelessness.

5