Andis AC-5 Use & Care Instructions Manual

Item pictured may differ from actual product

El artículo ilustrado puede diferir del producto real

Il est possible que l’article sur la photo soit différent du produit réel

Use & Care Instructions

AC-5

2

ENGLISH

IMPORTANT SAFEGUARDS

When using electrical appliances, especially when children are
present, basic safety precautions should always be followed,
including the following: Read all instructions before using.

Keep away from water.

DANGER: As with most electrical appliances,

electrical parts are electrically live even when the switch is
off. To reduce the risk of death by electric shock:

1. Always “unplug it” immediately after using.

2. Do not use while bathing.

3. Do not place or store appliance where it can fall or be
pulled into a tub or sink.

4. Do not place in or drop into water or other liquid.

5. If an appliance falls into water, “unplug it” immediately.
Do not reach into the water.

WARNING: To reduce the risk of burns,

electrocution, fire, or injury to persons:

1. An appliance should never be left unattended when
plugged in.

2. Close supervision is necessary when this appliance is
used by, on, or near children or individuals with certain
disabilities.

3. Use this appliance only for its intended use as described
in this manual. Do not use attachments not recommended
by Andis.

4. Never operate this appliance if it has a damaged cord or
plug, if it is not working properly, if it has been damaged,
or dropped into water. Return the appliance to an Andis
Authorized Service Station for replacement if under
warranty.

3

5. Keep the cord away from heated surfaces. Do not wrap
the cord around the appliance.

6. Never block the air openings of the appliance or place it
on a soft surface such as a bed or couch, where the air
openings may be blocked. Keep the air openings free of
lint, hair, etc.

7. Never use while sleeping.

8. Never drop or insert any object into any openings.

9. Do not use outdoors, or operate where aerosol (spray)
products are being used or where oxygen is being
administered.

10. Do not use an extension cord with this appliance.

11. Do not direct hot air toward eyes or other heat sensitive
areas.

12. Attachments may be hot during use. Allow them to cool
before handling.

13. Do not place appliance on any surface while it is operating.

14. While using the appliance–keep your hair away from the
air inlets.

15. Do not operate with a voltage converter.

SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE

OPERATING INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, the plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still doesn’t fit, contact a
qualified electrician. Do not attempt to defeat this safety feature. If this unit
shuts itself off, first press the reset button on the ALCI. If the unit still does
not run after being allowed to cool, return the unit for examination.

ALCI SHOCK PROTECTION

This Andis hair dryer has been manufactured with an appliance leakage
circuit interrupter (ALCI). This mechanism will shut the dryer off (making it

4

inoperable) under abnormal conditions, such as
falling or being immersed in water. The ALCI shock
protection is equipped with a test and a reset
button. Following are instructions on their use.

TEST BEFORE EACH USE

1. Plug the ALCI shock protection plug into a 110-120

volt electrical outlet (ordinary household current).
Do not attempt to use any other electrical outlet.

2. Before attempting to switch the dryer on, perform the following test:

Press the test button, the reset button should pop up. This confirms that
the safety plug is working properly.

3. Now press the reset button and your dryer will be operable and the

power switch of your dryer may be turned on for normal use.

4. If the dryer does not operate in the properly, it should be either returned

to an Andis Authorized Service Station for examination, or discarded.

HEAT AND FAN SETTINGS

This dryer is equipped with two air speeds and three heat settings. To turn
dryer ON and change air speed, push bottom switch to desired setting.
To change heat setting, push top switch to desired setting (Figure A).

COOL SHOT

This dryer is equipped with a cool shot button. To achieve the cool shot of
air, press the cool shot button (Figure A). The cool shot is ideal for locking in
curl for longer lasting style. Just concentrate cool air on desired curl until set.

RESET
TEST

COOL SHOT

HEAT SETTINGS

FAN SETTINGS

TURN COUNTER-

CLOCKWISE TO

REMOVE GRILL

FOAM FILTER

A

B

5

USER MAINTENANCE

This appliance does not require special maintenance, cleaning or
lubrication. Service only through Andis authorized service stations. To find
an Andis authorized service station near you log on to www.andis.com or
contact our customer service department: 1-800-558-9441 (U.S.) or
1-800-335-4093 (Canada).

Untwist cord before use. After use, re-wrap cord and store unit in a safe
place. Do not wrap cord tightly around appliance. Do not hang the unit by
the power cord.

TO CLEAN AIR INTAKE VENTS AND GRILL

For proper operating performance, the air openings must be kept clean of
excess hair and lint. Blocked or clogged air vents or grill may cause the
dryer to overheat. The dryer has a removable air intake grill and foam filter
(Figure B). These parts may be easily removed to clean excess hair and lint
that can clog up a hair dryer. The grill and foam filter are two separate
pieces; be sure not to lose filter when cleaning.

To clean, unplug the cord and allow dryer to cool. To remove the grill, turn
it counter-clockwise until it stops, then remove from dryer. To clean grill and
filter, take a small brush and mild cleaning solution and lightly brush away
excess lint and hair. Rinse and dry both pieces, making sure that they are
completely dry before putting them back on the dryer. Put the foam filter
back in place. Place grill back on dryer and turn it clockwise until it stops.

TO CLEAN EXTERIOR SURFACE OF DRYER

When cleaning is needed, unplug the cord and allow to cool. Clean with a
sponge or soft rag moistened with a mild soap and water solution. Do not
use harsh cleaners, detergents, or solvents. Dry thoroughly before use.