How it Works
Analog Devices
Loading...
AD8519 29 c
Datasheet
12 pgs183.94 Kb0
Table of contents
Loading...

Analog Devices AD8519 29 c Datasheet

8 MHz Rail-to-Rail
1
2
3
4
AD8529
8
7
6
5
OUT A
–IN A
+IN A
V–
+IN B
–IN B
OUT B
V+
Operational Amplifiers
AD8519/AD8529
FEATURES Space-Saving SC70 and SOT-23 Packaging Wide Bandwidth: 8 MHz @ 5 V Low Offset Voltage: 1.2 mV Max Rail-to-Rail Output Swing
2.7 V/ms Slew Rate Unity Gain Stable Single-Supply Operation: 2.7 V to 12 V
APPLICATIONS Portable Communications Microphone Amplifiers Portable Phones Sensor Interface Active Filters PCMCIA Cards ASIC Input Drivers Wearable Computers Battery-Powered Devices Voltage Reference Buffers Personal Digital Assistants

GENERAL DESCRIPTION

The AD8519 and AD8529 are rail-to-rail output bipolar ampli­fiers with a unity gain bandwidth of 8 MHz and a typical voltage offset of less than 1 mV. The AD8519 brings precision and bandwidth to the SC70 and SOT-23 packages. The low supply current makes the AD8519/AD8529 ideal for battery-powered applications. The rail-to-rail output swing of the AD8519/AD8529 is larger than standard video op amps, making them useful in applications that require greater dynamic range than standard video op amps. The 2.7 V/ms slew rate makes the AD8519/AD8529 a good match for driving ASIC inputs such as voice codecs.
The small SC70 package makes it possible to place the AD8519 next to sensors, reducing external noise pickup.
The AD8519/AD8529 is specified over the extended industrial (–40∞C to +125∞C) temperature range. The AD8519 is available in 5-lead SC70 and SOT-23 packages and an 8-lead SOIC surface-mount package. The AD8529 is available in 8-lead SOIC and MSOP packages.

PIN CONFIGURATIONS

8-Lead SOIC
(R Suffix)
NC
1
ⴚIN A
2
+IN A
3
Vⴚ
4
NC = NO CONNECT
AD8519
8
7
6
5
NC
V+
OUT A
NC
5-Lead SC70 and SOT-23
(KS and RT Suffixes)
OUT A
Vⴚ
+IN A
AD8519
1
2
3
5
4
V+
ⴚIN A
8-Lead SOIC and MSOP
(R and RM Suffixes)
REV. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 © 2003 Analog Devices, Inc. All rights reserved.
AD8519/AD8529–SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
(VS = 5.0 V, V– = 0 V, VCM = 2.5 V, TA = 25ⴗC, unless otherwise noted.)
Parameter Symbol Conditions Min Typ Max Unit
INPUT CHARACTERISTICS
Offset Voltage V
OS
AD8519AKS, AD8519ART 600 1,100 mV –40∞C £ T
£ +125∞C 800 1,300 mV
A
AD8519AR (R-8), AD8529 600 1,000 mV –40∞C £ T
Input Bias Current I
B
–40∞C £ T
Input Offset Current I
OS
–40∞C £ T
Input Voltage Range V
CM
Common-Mode Rejection Ratio CMRR 0 V £ V
–40∞C £ T
Large Signal Voltage Gain A
Offset Voltage Drift DV
VO
/DT2mV/∞C
OS
RL = 2 kW, 0.5 V < V
= 10 kW, 0.5 V < V
R
L
R
= 10 kW, –40∞C £ TA £ +125∞C30 V/mV
L
£ +125∞C 1,100 mV
A
300 nA
£ +125∞C 400 nA
A
± 50 nA
£ +125∞C ± 100 nA
A
04V
£ 4.0 V,
CM
£ +125∞C63100 dB
A
< 4.5 V 30 V/mV
OUT
< 4.5 V 50 100 V/mV
OUT
Bias Current Drift DIB/DT 500 pA/∞C
OUTPUT CHARACTERISTICS
Output Voltage Swing High V
Output Voltage Swing Low V
Short-Circuit Current I Maximum Output Current I
OH
OL
SC
OUT
IL = 250 mA –40∞C £ T I
= 5 mA 4.80 V
L
£ +125∞C 4.90 V
A
IL = 250 mA –40∞C £ T I
= 5 mA 200 mV
L
£ +125∞C80mV
A
Short to Ground, Instantaneous ± 70 mA
± 25 mA
POWER SUPPLY
Power Supply Rejection Ratio PSRR VS = 2.7 V to 7 V, 110 dB
£ +125∞C80dB
A
= 2.5 V 600 1,200 mA
Supply Current/Amplifier I
SY
–40∞C £ T V
OUT
–40∞C £ TA £ +125∞C 1,400 mA
DYNAMIC PERFORMANCE
Slew Rate SR 1 V < V Settling Time t
S
To 0.01% 1,200 ns
< 4 V, RL = 10 kW 2.9 V/ms
OUT
Gain Bandwidth Product GBP 8 MHz Phase Margin f
m
60 Degrees
NOISE PERFORMANCE
Voltage Noise en p-p 0.1 Hz to 10 Hz 0.5 mV p-p Voltage Noise Density e Current Noise Density i
Specifications subject to change without notice.
n
n
f = 1 kHz 10 nV/÷Hz f = 1 kHz 0.4 pA/÷Hz
REV. C–2–
AD8519/AD8529
ELECTRICAL CHARACTERISTICS
(VS = 3.0 V, V– = 0 V, VCM = 1.5 V, TA = 25ⴗC, unless otherwise noted.)
Parameter Symbol Conditions Min Typ Max Unit
INPUT CHARACTERISTICS
Offset Voltage V
OS
AD8519AKS, AD8519ART 700 1,200 mV –40∞C £ T
£ +125∞C 900 1,400 mV
A
AD8519AR (R-8), AD8529 700 1,100 mV –40∞C £ T
Input Bias Current I Input Offset Current I Input Voltage Range V
B
OS
CM
Common-Mode Rejection Ratio CMRR 0 V £ V
–40∞C £ T
Large Signal Voltage Gain A
VO
RL = 2 kW, 0.5 V < V
£ +125∞C 1,200 mV
A
300 nA ± 50 nA
02V
£ 2.0 V,
CM
£ +125∞C5575dB
A
< 2.5 V 20 V/mV
OUT
RL = 10 kW 20 30 V/mV
OUTPUT CHARACTERISTICS
Output Voltage Swing High V
Output Voltage Swing Low V
OH
OL
IL = 250 mA2.90V I
= 5 mA 2.80 V
L
IL = 250 mA 100 mV IL = 5 mA 200 mV
POWER SUPPLY
Power Supply Rejection Ratio PSRR VS = 2.5 V to 7 V,
Supply Current/Amplifier I
SY
–40∞C £ T V
OUT
£ +125∞C6080dB
A
= 1.5 V 600 1,100 mA
–40∞C £ TA £ +125∞C 1,300 mA
DYNAMIC PERFORMANCE
Slew Rate SR RL = 10 kW 1.5 V/ms Settling Time t
S
To 0.01% 2,000 ns
Gain Bandwidth Product GBP 6 MHz Phase Margin f
m
55 Degrees
NOISE PERFORMANCE
Voltage Noise Density e Current Noise Density i
Specifications subject to change without notice.
n
n
f = 1 kHz 10 nV/÷Hz f = 1 kHz 0.4 pA/÷Hz
REV. C
–3–
AD8519/AD8529–SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
(VS = 2.7 V, V– = 0 V, VCM = 1.35 V, TA = 25ⴗC, unless otherwise noted.)
Parameter Symbol Conditions Min Typ Max Unit
INPUT CHARACTERISTICS
Offset Voltage V
OS
AD8519AKS, AD8519ART 700 1,400 mV –40∞C £ T
£ +125∞C 900 1,600 mV
A
AD8519AR (R-8), AD8529 700 1,200 mV –40∞C £ T
Input Bias Current I Input Offset Current I Input Voltage Range V
B
OS
CM
Common-Mode Rejection Ratio CMRR 0 V £ V
–40∞C £ T
Large Signal Voltage Gain A
VO
RL = 2 kW, 0.5 V < V
£ +125∞C 1,300 mV
A
300 nA ± 50 nA
02V
£ 1.7 V,
CM
£ +125∞C5575dB
A
< 2.2 V 20 V/mV
OUT
RL = 10 kW 20 30 V/mV
OUTPUT CHARACTERISTICS
Output Voltage Swing High V
Output Voltage Swing Low V
OH
OL
IL = 250 mA 2.60 V I
= 5 mA 2.50 V
L
IL = 250 mA 100 mV IL = 5 mA 200 mV
POWER SUPPLY
Power Supply Rejection Ratio PSRR VS = 2.5 V to 7 V,
Supply Current/Amplifier I
SY
–40∞C £ T V
OUT
£ +125∞C6080dB
A
= 1.35 V 600 1,100 mA
–40∞C £ TA £ +125∞C 1,300 mA
DYNAMIC PERFORMANCE
Slew Rate SR RL = 10 kW 1.5 V/ms Settling Time t
S
To 0.01% 2,000 ns
Gain Bandwidth Product GBP 6 MHz Phase Margin f
m
55 Degrees
NOISE PERFORMANCE
Voltage Noise Density e Current Noise Density i
Specifications subject to change without notice.
n
n
f = 1 kHz 10 nV/÷Hz f = 1 kHz 0.4 pA/÷Hz
REV. C–4–
Loading...
+ 8 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use