Amprobe INSP-3, LT-10 Catalog Page

INSP-3

DUAL RATED

INSP-3 Wiring Inspector

Verify in seconds whether a building’s wiring complies with electrical code. Save time and money by testing more efficiently and identifying issues crucial to the safety and performance of an electrical system.

• Large display shows all relevant test data, no scrolling or switching screens needed

• Find faulty wiring that needs repair without removing outlet cover plates or panel covers, including:

– Faulty splices and connections – Incorrect wiring – Undersized wiring – Faulty or incorrectly wired AFCIs /GFCIs – Incorrect line voltage – Poor ground quality

FEATURE INSP-3 BEST ACCURACY

Load Constant 10, 15 or 20 amp simulation regardless of line voltage –

Operating Voltage 95 V AC

GFI Trip 6.0 mA nominal to trip GFI, 30 mA to trip RCD –

AFCI Trip Up to 8, 120 AMP pulses within 1/2 second period –

INCLUDED ACCESSORIES: Power cord, 9 V alkaline battery (installed), user manual, carrying case

• Verify performance of electrical systems with user selectable 10, 15 and 20 amp loads

• Flashing screen clearly indicates incorrect wiring or voltage drop test failure

• Test without tripping circuit breakers or blowing fuses

• Check grounding for safety and ability to support sensitive electronic equipment

^ 140 V AC +/- 2% + 2 LSD

LT-10

48" Antenna

LT-10 Fluorescent Lamp Tester

Troubleshooting fluorescent lamps is as easy as 1-2-3, saving you valuable time and money. The Amprobe Fluorescent Lamp Tester is a problem solving tool designed to easily test whether fluorescent light bulbs and ballasts are working prior to installation or removal. The intuitive single button operation allows you to troubleshoot lamps and avoid wasteful disposal of fluorescent light bulbs and ballasts. The compact tool easily fits in your pocket and the industry leading 48” antenna makes it easy to test fluorescent bulbs while still in the fixture, often eliminating the need to stand on a ladder.

• Tests fluorescent (electroluminescent) lights

• Built-in VolTect™ non-contact voltage detection

• Filament pin test to check continuity of bulb

• Simple, one-handed, single button operation

• Ultra compact design for portability

FEATURE LT-10

Compatible lamps

Test voltage Approximately 3 kV / 280 kHz

Field strength Approximately 100 µV/m at 260 - 300 kHz

Maximum antenna length 48" (1.2 m)

VolTect™ non-contact voltage detection AC 90 V to AC 600 V, 50/60 Hz to CAT II 300 V, CAT I 600 V

Filament pin test T2, T4, T5, T8, T9, T10, T12

INCLUDED ACCESSORIES:

48” antenna, adaptor plate, user manual, battery and carrying case

• 48” removable, fully retractable antenna included to test lights and voltage without a ladder

• Compatible with all fluorescent light bulbs:

– T2, T4, T5, T8, T9, T10, T12 fluorescent

energy saving light bulbs

T2, T4, T5, T8, T9, T10, T12

uorescent energy saving light bulbs

CAT I