Amprobe HD160C Specifications

Page 1
Key features:
N10140
Measures 1500 VDC
CAT IV 1000 V
IP67 Rated
Temperature, Frequency
& Capacitance
Magne-Grip™ holster
with magnetic hanging strap
No hassle warranty
No waiting.
Data Sheet
HD160C
Heavy-Duty Digital Multimeter
Rugged autoranging meter with true-rms
Highest voltage capability,
measuring to 1500 Vdc and 1000 Vac
CAT IV 1000 V rated
Special sealing for environment
and water resistance. IP67 rated
Constructed with drop-resistant
housing and PCB mounting
Measures capacitance,
temperature and frequency
Superior 10,000 count resolution
with bar graph
Magne-Grip™ holster, frees both
hands for work
Includes high voltage test leads
with threaded alligator clips
Temperature measurement built-in
Frequency and capacitance
Digi-Glo™ bright backlight
No shipping charges.
Our commitment to high-quality products and customer service is demonstrated by our industry exclusive “No Hassle” warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.
Amprobe® Test Tools
The HD160C is designed for profes­sional use in harsh environments. The meter is unusually rugged and reliable in everyday heavy use ap­plications. The meter is made using waterproof construction to prevent dirt, grime and moisture from enter­ing the case and causing inaccurate readings or damaging shorts. Built of tough, fire-retardant thermoplastic resistant to grease and chemical spills, with all sensi­tive components shock-mounted for a drop resistance to at least eight feet. Model HD160C has an extended voltage measurement capability of 1500 V dc and 1000 V ac, unmatched by any other line of digital multime­ters. The extended voltage ranges can withstand transients up to 12 kV.
HD160C
www.Amprobe.com
Page 2
HD160C Technical Specifications
Data Sheet
General Specifications
Display 4 digit LCD, 9999 counts, with annunciators, menu features and 41 segment bargraph. Polarity Indication Automatic Input overload indication OL, -OL.
Low Battery Indication B; less than 50 hours battery life remain, accuracy is no longer guaranteed Display Update Rate 2/sec, nominal; 20/sec for bargraph. Oper. Temp. 0 °C to +50 °C @ 0 to 75 % R.H. Storage Temp. -20 °C to 60 °C @ 0 to 80 % RH, battery removed Altitude 2000 meters - indoor use Temperature coefficient 0.1 x (spec. accuracy)/°C (0 °C to 18 °C and 28 °C to 50 °C) Fuse F 2 A/1500 V fuse (8 mm x 65 mm), I.R. 30 kA – Amprobe p/n FP700 Power Standard 9 -volt batter y, NEDA 1604, JIS 006P, IEC 6F22 Auto Power-Down Meter powers down after approximately 30 minutes of inactivity. Not in Min/Max function. Battery Life (typical) 150 hours, alkaline. Backlight usage consumes extra power and will decrease battery life significantly.
Dimensions, without holster (H x W x D) 200 x 102 x 59 mm (7.9 in x 4.0 in x 2.3 in)
Weight (incl. battery) 642 g (22 oz) Accessories Heavy Duty CAT IV 1000 V Test leads with threaded alligator clips (TL1500), battery (installed), hex
Case material Reinforced, high-impact, fire retardant thermoplastic Safety Meets EN 61010-1 CAT IV 1000 V (1500 V DC max) Class II, EN 60529:IP67CAT IV 1000 V (1500 V DC max) Class II, EN 60529:IP67 EMC Meets EN 61326-1
Backlight auto-off after approx. 60 seconds.
wrench (inside holster), Holster with Magne-Grip strap, Type K thermocouple probe (TP255), Tempera­ture Adaptor (TA-1A) and User Manual.
Electrical Specifications (Accuracy at 23 °C ± 5 °C, <75 % RH, guaranteed for one year.)
Function Range Accuracy
DC Volts
Ranges 1000 mV, 10 V, 100 V, 1500 V Resolution 0.1 mV in 1000 mV range Accuracy ±(0.1 % rdg + 5 dgt) Input Impedance 10 M CMRR >120 dB up to 1500 V dc NMRR >60 dB at 50 or 60 Hz OL Protection 1500 V dc or 1000 V ac rms. Transient protection 12 kV impulse (1.2 µS/50 µS) based on EN 61010-1:2001 impulse requirement for at CAT IV 1000
AC Volts True rms
Ranges 1000 mV, 10 V, 100 V, 1000 V Resolution 0.1 mV in 1000 mV range Accuracy 1000 mV (45 Hz to 400 Hz) ± (1.2 % rdg + 10 dgt)
10 V, 100 V (45 Hz to 500 Hz) ± (1.2 % rdg + 10 dgt) 10 V, 100 V (500 Hz to 2 kHz) ± (2.0 % rdg + 10 dgt) 1000 V (45 Hz to 1 kHz) ± (2.0 % rdg + 10 dgt)
Input Impedance 10 M Conversion type True rms, ac coupled 5 % to 100 % of range Crest factor 3 OL Protection 1500 V dc or 1000 V ac rms Transient protection 12 kV impulse (1.2 µS/50 µS) based on EN 61010-1:2001 impulse requirement for at CAT IV 1000 V
V/1500V dc product. This product should not be used in installations where transients exceed 12 kV.
product. This product should not be used in installations where transients exceed 12 kV
Amprobe® Test Tools
Page 3
HD160C Technical Specifications (continued)
Function Range Accuracy
DC Current
Ranges 100 µA, 1000 µ A, 10mA, 100mA, 400mA, 2A (Auto/Manual ranging) Resolution 0.01µA in 100 µA range Accuracy 100 µA range ± (0.5% rdg + 10 dgts)
1000 µA to 400 mA ranges ± (0.5% rdg + 5 dgts) 2 A range ± (1.5% rdg + 10 dgts)
Input protection 2 A/1500 V fast blow ceramic fuse 8×65 mm on A input , FP700 Burden voltage voltage µA range of 1 mV/1 µA , mA range of 10 mV/1 mA, 2A range of 500 mV/1A, 500 mV max. (2 V max. on
1000 µA, 100 mA, 400 mA, 2 A ranges)
OL Protection A Input (F 2 A /1500 V, size 8 x 65 mm IR fast blow ceramic)
AC Current True rms Current True rms
Ranges 100 µA, 1000 µ A, 10 mA, 100 mA, 400 mA, 2 A Resolution 0.01 µA in 100 µA range Accuracy (45 Hz to 1kHz) 100 µA to 100 mA ± (1.5 % + 10 dgts)
400 mA ± (2.0 % + 10 dgts) 2 A ± (2.5 % + 20 dgts)
Voltage burden burden see DC Current DC Current Conversion type True rms ac coupled 10 to 100% of range Crest factor 3 OL protection see DC Current
Resistance
Ranges 1000 , 10 k, 100 k, 1000 k, 10 M, 40 M Resolution 0.1 in 1000 range Accuracy 1000 to 1000 k ranges ± (0.5 % rdg + 8 dgts)
10 M range ± (1.0 % rdg + 10 dgts) 40 M range ± (2.0 % rdg + 10 dgts)
Overload protection, all ranges 1500 V dc or 1000 V ac rms
Continuity Test
Audible indication Less than 40 Response time 100 ms Overload protection 1500 V dc or 1000 V ac rms
Capacitance
Ranges 40 ηF, 400 ηF, 4 µF, 40 µF, 400 µF (3999 counts) (Auto/Manual ranging) Resolution 0.01 ηF Accuracy 40 ηF, 400 µF ranges ±(3.0% rdg +10 dgts)
400 ηF to 40 µF ranges ±(3.0% rdg +5 dgts) Test voltage < 1 V Test Frequency Frequency 1.3 Hz on 40 ηF to 40 µF ranges; 0.7 Hz on 400 µF range Overload protection protection 1500 V dc or 1000 V ac rms dc or 1000 V ac rms or 1000 V ac rms ac rms
Temperature
Ranges -20 °C ~ 1300 °C (-4° F ~ 2372 °F) 3999 counts Resolution 1 °C, 1 °F Accuracy -20 °C ~ 10 °C ±(2.0% rdg + 4 °C)
10 °C ~ 200 °C ±(1.0% rdg + 3 °C) 200 °C ~ 1300 °C ±(2.0% rdg + 2 °C)
-4 °F ~ 50 °F ±(2.0% rdg + 8 °F) 50° F ~ 400 °F ±(1.0% rdg + 6 °F) 400 °F ~2372 °F ±(2.0% rdg + 4 °F)
Overload protection 1500 V dc or 1000 V ac rms
Data Sheet
(continued on next page)
www.Amprobe.com
Page 4
HD160C Technical Specifications (continued)
Function Range Accuracy
Frequency
Ranges 100Hz, 1000Hz, 10kHz, 100kHz, 1000kHz, 10MHz Resolution 0.01 Hz on 100 Hz range Accuracy ±(0.1% rdg + 5 dgts) Sensitivity 3 Hz to 1 MHz >2.5 V ac rms
1MHz to 10MHz >2.5 V ac rms, <5 V ac rms Minimum input range 100 Hz range >3 Hz;
1000 Hz range >30 Hz Minimum pulse width > 25 ns Duty cycle limits > 30 % and < 70 % Overload protection 1500 V dc or 1000 V ac rms
Included Accessories
Heavy Duty CAT IV 1000 V Test leads with threaded alligator clips (TL1500), battery (installed), hex wrench (inside holster), Holster with Magne-Grip strap, Type K thermocouple probe (TP255), Temperature Adaptor (TA-1A) and User Manual.
Optional Accessories
TL1500 Cat IV 1000 V Test Leads with Alligator Clips CT235A 1000 A ac/dc Clamp CT237A 200 A ac/dc Current Clamp CT238A 20 A ac/dc Current Clamp VC221B Padded Vinyl Case. Fits meter & holster. DC205C Deluxe Hard-Shell Carry Case DC207C Large Deluxe Hard-Shell Carry Case with extra
space for accessories
HV231-10A High Voltage Probe FP700 Replacement Fuse, 2 A/1500 V, pack of two TA-1A K-type thermocouple, temperature adapter
Data Sheet
Amprobe® Test Tools
website: www.Amprobe.com email: info@amprobe.com 6920 Seaway Blvd. Everett, WA 98203 tel: 877-AMPROBE
Amprobe® Test Tools Europe
P.O. Box 1186 5602 BD Eindhoven The Netherlands
Amprobe® Test Tools
©2007 Amprobe Tes t Tools. All rights reser ved.
3/20 07 PN: 1646298 Rev C
www.Amprobe.com
Loading...