Amprobe ACD-20SW, ACD-23SW, ACD-10 PLUS, ACD-14 PLUS Catalog Page
180-degree
rotating head
ACD-23SW
Swivel™ Clamp Meters
TOP RAT ED
Get fast and easy testing for HVAC and electrical applications. See measurements in tight or
inconvenient spaces with the patented 180-degree rotating head design of Amprobe’s Swivel™
Clamp Meters. The slim jaw puts all features within reach for one-handed operation.
• 180-degree rotating head
• VolTect™ non-contact voltage detection
• Audible continuity
FEATURE ACD-20SW ACD-23SW BEST ACCURACY
True-RMS –
AC Current 40.00 A , 400.0 A +/- (2.0% rdg + 10 LSD) 50 Hz
AC Volt age 4.000 V, 40.00 V, 400.0 V, 600.0 V
DC Voltage 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600.0 V +/- (0.5% rdg + 2 LSD)
Ω
, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ,
Resistance
Capacitance –
Temperature –
Diode Test
™
Vol Tec t
non-contact
voltage detection
Backlight –
Accommodates
Conductors
INCLUDED ACCESSORIES: Test leads, battery (installed), user manual,
carrying case, K-type thermocouple (ACD-23SW only)
400.0
4.000 M
Ω
, 40.00 MΩ
•
^ 600 VAC (50 Hz ^ 60 Hz) –
70 V
• Auto ranging for quick checks
• Manual ranging for precise measurements
• Data hold
•
+/- (1.2% rdg + 8 LSD)
^ 50 Hz ^ 500 Hz at 4 V ^ 400 V ranges
+/- (1.0% rdg + 4 LSD) at 400
4.000 µF, 40.00 µF,
400.0 µF, 4,000 µF
^ 400°F,
-30°F
^ 400°C)
(-35°C
– –
+/- (3.0% rdg + 5 LSD) on 40 µF
+/- (1.0% + 2°F) 32°F
+/- (1.0% + 1°C) 0°C
•
Up to 1.18“ (30 mm) in diameter
–
ranges
ranges
–
^ 60 Hz
Ω
^ 400 kΩ
^ 400 µF
^ 400°F
^ 400°C
Recommended Accessories
FOR: ACD-20SW, ACD-23SW,
ACD-10 PLUS and ACD-14PLUS
TL35B
Test Leads
(See Page 56)
ACD-10 PLUS
ELS2A
AC Line
Splitter
(See Page 56)
ACD-14 PLUS
8
ACD-10 PLUS Clamp Multimeter
with Uniquely Thin Jaws
With thinner jaws than standard clamp multimeters (only 0.4”/10 mm thick), the ACD-10 PLUS
and ACD-14 PLUS allow access to tight measurement areas and still accommodate conductors
up to 1"/25 mm.
ACD-14 PLUS Dual Display Digital Clamp Multimeter
The professional’s choice for both HVAC and electrical applications with a complete set of
measurement features including dual displays that allow you to view amperage and voltage
measurements simultaneously.
• Continuity buzzer
• Hold and maximum reading functions
• Auto ranging
• Auto power off and low battery indication
• Rubber over-molded case
• Frequency is measured by either jaws or test
leads (ACD-10 PLUS only)
FEATURES ACD-10 PLUS ACD-14 PLUS
True-RMS – –
AC Volt age 4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current 40.00 A, 400.0 A, 600 A
Resistance
Capacitance 500.0 nF, 5.000 µF, 50.00 µF, 500.0 µF, 3000 µF
Frequency 40 Hz
Temperature – -4°F
Dual Displays –
Micro Amps –
Accommodates
Conductors
INCLUDED ACCESSORIES: Test leads, battery (installed), soft carrying pouch,
K-type thermocouple with banana plug (ACD-14 PLUS only), user manual
Ω
, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ, 4.000 MΩ, 40.00 M
400.0
^
400 Hz with Jaw, 10 Hz ^ 100 kHz with test leads
up to 1.0” (25 mm) in diameter
• Microamps for testing
flame sensors (ACD-14 PLUS only)
• Diode test (ACD-14 PLUS only)
Ω
^
999°F (-20°C ^ 537°C)
•
•
Loading...