Amprobe ACD-16-TRMS-PRO Specifications
Data Sheet
600V
ACD-16 TRMS-PRO
1000A Data-Logging Clamp-on Multimeter
Need the perfect tool to troubleshoot a system? The ACD-16 TRMSPRO provides a full range of measurements, enhanced with data
logging capabilities, to catch what the eye can’t see. Double the
efficiency, with an optional PC interface kit. True RMS for a more
accurate signal in a noisy electrical environment.
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
True RMS
■
Backlight ■
Measurements: AC/DC Voltage ■
up to 600V, AC Current up to
1000A, Resistance, Frequency
and Temperature
■
Data-logging up to 5400
points
Optional PC interface
■
capability (RS-232 KIT2)
Audible continuity ■
Auto power off ■
Data hold ■
Large, easy to read digital display ■
Accommodates conductors up to ■
45mm (1.77”) in diameter
Carrying case, Type k ■
thermocouple, test leads,
batteries (installed) and user
manual included
Voltage overload protection for
■
all functions up to 600V AC/DC
(note: $500 MSLP limit)
Amprobe® Test Tools
www.Amprobe.com
ACD-16 TRMS-PRO 1000A Data-Logging Clamp-on Multimeter
Data Sheet
Electrical Specifications: Accuracy is ±(% reading digits + number of digits) or otherwise specified, at 23 °C ± 5 °C & less than 75% R.H.
True RMS Models ACD-16 TRMS-PRO ACV & ACA clamp-on accuracies are specified from 5% to 100% of range or otherwise specified.
Maximum Crest Factor are as specified below, & with frequency spectrums, besides fundamentals, fall within the meter specified AC
bandwidth for non-sinusoidal waveforms. Fundamentals are specified at 50Hz and 60Hz.
Function Range Accuracy
AC Voltage
50Hz / 60Hz 600.0 V 1.0% + 5d
45Hz ~ 500Hz 600.0 V 1.5% + 5d
500Hz ~ 3.1kHz 9 600.0 V 2.5% + 5d
CMRR: >60dB @ DC to 60Hz, Rs=1kW
Input Impedance: 2MW, 30pF nominal
True RMS models Crest Factor: < 2.3 : 1 at full scale & < 4.6 : 1 at half scale
DC Voltage
600.0V 0.5% + 5d
NMRR: >50dB @ 50/60Hz
CMRR: >120dB @ DC, 50/60Hz, Rs=1kW
Input Impedance: 2MW, 30pF nominal
Resistance
999.9W 1.0% + 6d
Open Circuit Voltage: 0.4VDC typical
Audible Continuity Tester
Audible threshold: between 10W and 300W.
Response time: 250µs
Frequency
5.00Hz ~ 500.0Hz 0.5%+4d
Sensitivity (Sine RMS)
40A range: > 4A
400A range: > 40A
1000A range: > 400A
600V range: > 30V
Temperature
-50°C ~ 300°C 2.0% + 3°C
-58°F ~ 572°F 2.0% + 6°F
1)
Add 3°C (or 6°F) to specified accuracy @ -20°C ~ -50°C (or @ -4°F ~ -58°F) Type-K thermocouple range & accuracy not included
1)
1)
AC Current (Clamp-on)
50Hz / 60Hz 40.00A, 400.0A, 1000A 1.0% + 5d
45Hz ~500Hz 40.00A, 400.0A 2.0% + 5d
1000A 2.5% + 5d
1) 2) 3)
1) 2) 3)
1) 2) 3)
500Hz ~ 3.1kHz
40.00A, 400.0A 2.0% + 5d
1000A 2.5% + 5d
1) 2) 3)
1) 2) 3)
True RMS models Crest Factor:
< 2.5 : 1 at full scale & < 5.0 : 1 at half scale for 40.00A & 400.0A ranges < 1.4 : 1 at full scale & < 2.8 : 1 at half scale for 1000A range
1)
Add 8d to specified accuracy while reading is below 10% of range
2)
Induced error from adjacent current-carrying conductor: < 0.06A/A
3)
Specified accuracy is for measurements made at the jaw center. When the conductor is not positioned at the jaw center, position
errors introduced are:
Add 1% to specified accuracy for measurements made WITHIN jaw marking lines (away from jaw opening)
Add 4% to specified accuracy for measurements made BEYOND jaw marking lines (toward jaws opening)
Amprobe® Test Tools
www.Amprobe.com
Loading...