Amprobe AC50A Specifications
No hassle
600V
300V
warranty
No waiting.
Data Sheet
AC50A
AC Leakage Clamp
Current clamp multimeter with leakage current capability.
Current clamp multimeter for measuring low AC current in the microamps.
Great for applications requiring measurement of leakage and fault currents.
AC current measurement to 60A ■
Leakage current measurement with resolution of 0.01mA ■
AC voltage to 400V ■
Resistance measurement and continuity beeper ■
Min/Max control to see largest or smallest values in a series of ■
measurements
Relative value measurement to determine differentials
■
Data Hold to freeze measurement value on the display ■
Digital display with Analog bargraph ■
Jaw opening 30 mm (1.2 in) ■
Auto-Power-Off to save battery life ■
Minimum Resolution 0.01mA ■
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
(note: $500 MSLP limit)
Amprobe® Test Tools
Included accessories
Batteries, carrying case,
test leads, users manual
Optional accessories
TL36A Heavy duty test leads
with threaded alligator clips
www.Amprobe.com
AC50A AC Leakage Clamp
Specifications (23° C % 5° C, max. 75 % rel. humidity)
Display: 3-3/4, LCD incl. functions and symbols
Bargraph: 40 segments
Range Selection: manual
Auto-Power-Off: approx. 30 min.
Overload display: the left digit is blinking
Measuring rate: 20 measurements/sec. (Bargraph)
2 measurements/sec. (LCD)
Clamp opening: ca. 30 mm (1.2”)
Overvoltage Categorie: CAT II, 600 V, CAT III, 300 V
Pollution degree: 2
Height above MSL.: up to 2000 m, indoor operation
Battery display: at low battery
Power supply: Battery 2 x 1,5 V IEC LR6 (alkaline)
Current Consumtion: approx. 10 mA
Operation temperature: -10° C … 50° C (14° F... 122° F)
Storage temperature: -20° C … 60° C (-4° F... 140° F)
Humidity: < 75 % relative humidity
Dimension: 183 x 63,6 x 35,6 mm ( 7.2 x 2.5 x 1.4 inch)
Weight: ca. 190 g (7 oz)
Data Sheet
Range Resolution Accuracy
Current AC
50 Hz/60 Hz 40 Hz … 1 kHz
0 – 40 mA 10 μA
0 – 400 mA 100 μA ±(1.5 % rdg. +3 D) ±(2.0 % rdg. +5 D)
0 – 4 A 1 mA
0 – 40 A 10 mA
0 – 50 A 0.1 A ±(1.5 % rdg. +5 D) ±(2,0 % rdg. +5 D)
50 – 60 A 0.1 A ±(3.0 % rdg. +5 D) ±(3.5 % rdg. +5 D)
Voltage AC
50 Hz/60 Hz 40 Hz … 1 kHz
0...400 V 0.1 V ±(1.0 % rdg. +3 D) ±(2.0 % rdg..± 4 D)
Resistance
Range Resolution Accuracy Overload Protection
400 Ω 0.1 Ω ±(1 % rdg. +3 D) 600 V AC
Continuity
Range Resolution Beep Open Circuit Voltage
Ω/ 0.1 Ω < ca. 40 Ω < 0.4 V
Overload Protection 600 V AC
Amprobe® Test Tools
website: www.Amprobe.com
email: info@amprobe.com
Everett, WA 98203
Tel: 877-AMPROBE
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
©2008 Amprobe Test Tools. All rights re served.
5/20 08 3128649 Rev A
Amprobe® Test Tools
www.Amprobe.com
Loading...