AMPROBE 35XP-A Service Manual

Data Sheet

1000 V

600 V

300 V

35XP-A

Digital Multimeter

A compact, full-featured digital multimeter for plant maintenance, HVAC, electrical and electronic applications.

• Temperature measurement capability to 1000 °C/1832 °F (Type K thermocouple included)

• 750 V ac/1000 V dc—highest voltage rating in this class of meter

• Capacitance for motor run/start test

• 0.1 µA resolution for flame sensor testing

Specifications

Function Range Accuracy

Voltage

DC Volts

Ranges 400 mV, 4 V, 40 V, 400 V, 1000 V ± (0.5 % rdg + 1 dgt)

AC Volts (45 Hz to 500 Hz)

Ranges 400 mV (45 Hz to 100 Hz) ± (1.5 % rdg + 5 dgts)

Resolution 100 µV

Input Impedance 400 mV: >100 MΩ; 4 V: 10 MΩ; 40 V to 1000 V: 9.1 MΩ

Overload Protection 1000 V dc or 750 V ac rms

Current

DC Current

Ranges 400 µA, 4000 µA, 40 mA, 400 mA ± (1.0 % rdg + 2 dgt)

AC Current (45 Hz to 500 Hz)

Ranges 400 µA, 4000 µA, 40 mA, 400 mA ± (1.5 % rdg + 5 dgts)

Resolution 0.1 µA

Input Protection 2 A/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on A input

Burden Voltage 500 mV max. (2 V max. on 4 mA, 400 mA ranges)

esistance

Resolution 100 mΩ

Open Circuit Voltage -0.45 V dc typical, (-1.2 V dc on 400 Ω range)

Overload Protection 1000 V dc or 750 V ac rms

Capacitance

Resolution 1 pF

Test Voltage < 1 V

Test Frequency 1.3 Hz on 4 nF to 40 µF ranges, 0.7 Hz on 400 µF, 4 mF ranges

Input Protection 2 A/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on A input

atur

emper

Resolution 0.1 °C, 0.1 °F

Overload Protection 1000 V dc or 750 V ac rms

4 V, 40 V, 400 V, 750 V ± (1.5 % rdg + 5 dgts)

2 A ± (2.0 % rdg + 3 dgts)

2 A ± (2.5 % rdg + 5 dgts)

400 Ω, 4 kΩ, 40 kΩ, 400 kΩ, 4 MΩ ± (1.0 % rdg + 4 dgts) 40 MΩ ± (2.0 % rdg + 5 dgts)

4 nF, 40 nF, 400 nF, 4 µF ± (5.0 % rdg + 30 dgts) 40 uF, 400 uF ± (5.0 % rdg + 5 dgts) 4 mF ± (5.0 % rdg + 15 dgts)

400 °C, 1000 °C, 400 °F, 1832 °F

-20 °C to 10 °C ± (2.0 % rdg + 4 °C)

10 °C to 200 °C ± (1.0 % rdg + 3 °C)

200 °C to 1000 °C ± (3.0 % rdg + 2 °C)

-4 °F to 50 °F ± (2.0 % rdg + 8 °F)

50 °F to 400 °F ± (1.0 % rdg + 6 °F)

400 °F to 1832 °F ± (3.0 % rdg + 4 °F)

• Frequency to 1 MHz

• Resistance to 40 M

Ω

• Data Hold freezes display

• Magne-Grip

™ holster

• VolTect™ non-contact voltage detector

• Triple safety ratings

No waiting.

No shipping charges.

No hassle warranty

Our commitment to

quality products

high-

Specifications cont.

Function Range Accuracy

Frequency

Resolution 1 Hz

Sensitivity 1

Minimum Pulse Width > 25 ns

cle Limits

Duty Cy

Overload Protection 1000 V dc or 750 V ac rms

4 k, 40 k, 400 k, 1 M

0 Hz to 1 MHz: >2.5 V rms

0 % and < 70 %

> 3

Continuity

Audible Indication Less than 25 Ω

esponse Time

erload Protection

00 ms

000 VDC or 750 VAC rms

Diode Test

Test Current 1.2 mA (approximate) ± (1.5 % rdg + 3 dgts)

esolution

cuit Voltage

Open Cir

Overload Protection 1000 V dc or 750 V ac rms

1 mV

3.0 dc typical

Non-Contact Voltage Indicator

oltage 70 V to 600 V ac beeper chirps and big bright red LED comes on, works on all ranges

Sense v

General Specifications

Display 3-3/4 digit liquid crystal display (LCD) with a maximum reading of 3999

Polarity Automatic, positive implied, negative polarity indication

Overrange (OL) or (-OL) is displayed

Zero Automatic

Low Battery Indication The “ ” is displayed when the battery voltage drops below the

Auto Power Off Approx. 10 minutes

Measurement Rate 2 times per second, nominal

Operating Environment 0 °C to 50 °C at <70 % R.H.

Storage Temperature -20 °C to 60 °C, 0 to 80 % R.H. with battery removed from meter

Accuracy Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity

Temperature Coefficient 0.1 x (specified accuracy) per °C (0 °C to 18 °C, 28 °C to 50 °C)

Altitude 2000 m

Power Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22

Battery Life 150 hours typical with carbon-zinc, 300 hours typical with alkaline

Dimensions (H x W x D) 155 mm x 72 mm x 32 mm

Weight Approx. 400 g including battery

Warranty One-year

operating level

± (0.1 % rdg + 3 dgts)

and customer service is

demonstr

ated b

our

industry exclusive

“No Hassle” warranty.

In the unlikely event

that a Amprobe test tool

requires warranty serv-

ice, any of our local

dealers are authorized to

replace it, on the spot.

Included Accessories

air of test leads (TL245), K

P (TP255), temperature adapter (XR-TA), fuse 2 A/ 1000 V (P/N FP200), 9 V battery (installed), Magne-Grip strap (H2-XR) and users manual.

™ Holster with magnetic hanging

-type thermocouple

Optional Accessories

VC30 Carrying Case DL243C Test Lead Kit

Amprobe® Test Tools

website: www.Amprobe.com email: info@ampr 6920 Seaway Blvd. Everett, WA 98203 tel: 877-AMPR

obe®

Ampr

P.O. Box 1186 5602 BD Eindhoven The Netherlands

obe

OBE

Tools Europe

est

12344

.com

1 D-US-N RevC