Amprobe 35XP-A Specifications

No hassle

CAT

1000V

600V

300V

warranty

No waiting.

No shipping
charges.

Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.

Data Sheet

35XP-A

Digital Multimeter

A compact, full-featured digital multimeter for plant
maintenance, HVAC, electrical and electronic applications.

Temperature measurement ■
Capability to 1000 °C/1832 °F
(Type K thermocouple included)

750 V AC/1000 V DC—highest

■

voltage rating in this class of
meter

Capacitance for motor run/start

■

test

0.1 μA resolution for flame

■

sensor testing
Frequency to 1 MHz

■

Resistance to 40 M ■ W
Data Hold freezes display

■

Magne-Grip™ holster ■
VolTect™ non-contact voltage ■

detector
Triple safety ratings

■

35XP-A

(note: $500 MSLP limit)

Amprobe® Test Tools

www.Amprobe.com

35XP-A Digital Multimeter

General Specifications

Display 3-3/4 digit liquid crystal display (LCD) with a maximum reading of 3999
Polarity Automatic, positive implied, negative polarity indication
Overrange (OL) or (-OL) is displayed
Zero Automatic
Low Battery Indication The “M” is displayed when the battery voltage drops below the operating level
Auto Power Off Approx. 10 minutes
Measurement Rate 2 times per second, nominal
Operating Environment 0 °C to 50 °C at <70 % R.H.
Storage Temperature -20 °C to 60 °C, 0 to 80 % R.H. with battery removed from meter
Accuracy Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity
Temperature Coefficient 0.1 x (specified accuracy) per °C (0 °C to 18 °C, 28 °C to 50 °C)
Altitude 2000 m
Power Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
Battery Life 150 hours typical with carbon-zinc, 300 hours typical with alkaline
Dimensions (H x W x D) 155 mm x 72 mm x 32 mm
Weight Approx. 400 g including battery
Warranty One-year

Specifications

Function Range Accuracy

Data Sheet

Voltage

DC Volts
Ranges 400 mV, 4 V, 40 V, 400 V, 1000 V ± (0.5 % rdg + 1 dgt)
AC Volts (45 Hz to 500 Hz)
Ranges 400 mV (45 Hz to 100 Hz) ± (1.5 % rdg + 5 dgts)
4 V, 40 V, 400 V, 750 V ± (1.5 % rdg + 5 dgts)
Resolution 100 μV
Input Impedance 400 mV: >100 MW; 4 V: 10 MW; 40 V to 1000 V: 9.1 MW
Overload Protection 1000 V DC or 750 V AC RMS

Current

DC Current
Ranges 400 μA, 4000 μA, 40 mA, 400 mA ± (1.0 % rdg + 2 dgt)
2 A ± (2.0 % rdg + 3 dgts)
AC Current (45 Hz to 500 Hz)
Ranges 400 μA, 4000 μA, 40 mA, 400 mA ± (1.5 % rdg + 5 dgts)
2 A ± (2.5 % rdg + 5 dgts)
Resolution 0.1 μA
Input Protection 2 A/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on A input
Burden Voltage 500 mV max. (2 V max. on 4 mA, 400 mA ranges)
Resistance 400 W, 4 kW, 40 kW, 400 kW, 4 MW ± (1.0 % rdg + 4 dgts)
40 MW ± (2.0 % rdg + 5 dgts)
Resolution 100 mW
Open Circuit Voltage -0.45 V DC typical, (-1.2 V DC on 400 W range)
Overload Protection 1000 V DC or 750 V AC RMS

Amprobe® Test Tools

www.Amprobe.com