Amprobe 15XP-B Specifications
No hassle
1000V
600V
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
15XP-B
Digital Multimeter
A compact digital multimeter for electronics and
test applications
The 15XP-B is the right choice ■
for electronics engineers,
technicians and field service
Autoranging display for faster
■
measurements
TTL logic test for digital circuits
■
Integrated tilt stand for easy ■
bench use
Diode test for component level
■
troubleshooting
Data Hold freezes display to
■
“hold” measurement reading
750 V AC / 1000 V DC—highest
■
voltage rating in this size of
meter
Special 2000M
■ W measurement
range
15XP-B
Data Sheet
(note: $500 MSLP limit)
Amprobe® Test Tools
www.Amprobe.com
15XP-B Digital Multimeter
General Specifications
Display 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999
Polarity Automatic, positive implied, negative polarity indication
Overrange (OL) or (-OL) is displayed
Zero Automatic
Low Battery Indication The ”M” is displayed when the battery voltage drops below the operating level
Auto Power Off Approx. 10 minutes
Measurement Rate 2 times per second, nominal
Operating Environment 0 °C to 50 °C at <70 % R.H.
Storage Temperature -20 °C to 60 °C, 0 to 80 % R.H. with battery removed from meter
Accuracy Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity
Temperature Coefficient 0.1 x (specified accuracy) per °C (0 °C to 18 °C, 28 °C to 50 °C)
Altitude 2000 m
Power Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
Battery Life 200 hours typical with carbon-zinc
Dimensions (H x W x D) 155 mm x 72 mm x 32 mm (6.1 x 2.83 x 1.26 IN)
Weight Approx. 210 g (0.46 Lb) including battery
Warranty One-year
Specifications
Function Range Accuracy
Voltage
DC Volts
Ranges 200 mV, 2 V, 20 V, 200 V, 1000 V ± (0.5 % rdg + 1 dgt)
AC Volts (45 Hz to 500 Hz)
Ranges 200 mV (45 Hz to 100 Hz) ± (1.5 % rdg + 5 dgts)
2 V, 20 V, 200 V, 750 V ± (1.5 % rdg + 5 dgts)
Resolution 100 μV
Input Impedance 400 mV: >100 MW; 4 V: 10 MW; 40 V to 1000 V: 9.1 MW
Overload Protection 1000 V DC or 750 V AC RMS
Current
DC Current
Ranges 200 μA, 2000 μA, 20 mA, 200 mA ± (1.0 % rdg + 2 dgt)
2 A ± (2.0 % rdg + 3 dgts)
AC Current (45 Hz to 500 Hz)
Ranges 200 μA, 2000 μA, 20 mA, 200 mA ± (1.5 % rdg + 5 dgts)
2 A ± (2.5 % rdg + 5 dgts)
Resolution 0.1 μA
Input Protection 2 A/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on A input
Burden Voltage 500 mV max. (2 V max. on 2 mA, 200 mA ranges)
Resistance 200 W, 2 kW, 20 kW, 200 kW , 2 MW ± (1.0 % rdg + 4 dgts)
2000 MW ± {5.0 % (rdg -10 dgts) +20 dgt}
Resolution 100 mW
Open Circuit Voltage -0.45 V DC typical, (-1.2 V DC on 200 W range)
Overload Protection 1000 V DC or 750 V AC RMS
Continuity
Audible Indication Less than 25 W
Response Time 100 ms
Overload Protection 1000 V DC or 750 V AC RMS
Data Sheet
Amprobe® Test Tools
www.Amprobe.com
Loading...