
SVT-810HPC
High Performance Bass Cabinet
Your Ampeg SVT-810HPC High Performance Bass Cabinet is built
from the finest materials and components available. The cabinet is
carefully constructed from 13-ply Baltic Birch. The cabinet is then
loaded with heavy duty custom designed cast frame speakers. All of the
speakers have edge wound aluminum voice coils. The two coaxial
speakers introduce the use of Tractrix wave-guide technology for clear
high frequency reproduction. The Tractrix horn is integrated into the
shape of the pole piece. The design is based on a proprietary CAD program that allows us to optimize the flare of the horn for proper acoustic
impedance matching and optimize the magnetic flux in the speaker
gap to ensure greater efficiency.
The cabinet also features steel bottom handles, an industrial
strength grip bar and heavy duty wheels. Skid rails and a metal kickplate are placed on the back of the enclosure to protect it while loading in and out of venues and vehicles.
The Speakon
®
and 1/4” jacks are wired in parallel, allowing easy
daisy chaining from one speaker to another. Each of the jacks may be
used as an input or a through connection.
Speakon
®
connectors are recognized as the standard for professional installations, assuring a secure, permanent connection that
won’t corrode, vibrate loose or be easily tampered with. The 1/4” jacks
are convenient. However, the Speakon
®
jacks are recommended when
using power amplifiers over 150 watts, for permanent installations, or
for the “first” speaker among a number of daisy chained speakers.
Speakon®to 1/4” Wiring Diagram:
1-
1+
1+1-

SVT-810HPC
High Performance Bass Cabinet
1: 1/4” Input / Output Jacks
2: Speakon
®
Input / Output Jacks
3: High Frequency Horn Level Control
The SVT-810HPC Jackplate:
Suggested Hookup Diagrams:
(TO 1/4" JACK)
(FROM 1/4" JAC
TO 1/4" JACK)
TO SPEAKON
FROM SPEAKON
TO SPEAKON

Ampeg continually develops new products, as well as improves existing ones. For this reason,
the specifications and information in this manual are subject to change without notice.
47-842-03 • 010903
AMPEG SVT-810HPC
High Performance Bass Cabinet
©2003 AMPEG, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
CAUTION: THIS SPEAKER IS CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER
CAUTION IS ADVISED, AND EAR PROTECTION RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.
TECHNICAL SPECIFICATIONS:
TYPE 8x10 Bass Enclosure
FREQ RESPONSE (+/-3dB) 50Hz – 18kHz (±3dB)
USABLE LOW FREQ (-10dB) 40Hz (-10dB)
RMS POWER HANDLING 1500 watts
PEAK POWER HANDLING 3000 watts
CROSSOVER FREQUENCY 6kHz
IMPEDANCE 4 ohms
SENSITIVITY 100dB SPL 1w/1m
MAXIMUM SPL 131dB
COMPONENTS 6 Custom Designed 200 watt cast frame
10” full range speakers
2 Custom Designed 200 watt cast frame
10” coaxial speakers with 1” HF drivers
DIMENSIONS (H x W x D) 48” x 26” x 16”
WEIGHT 205 lbs.
Speakon®is a registered TM of Neutrik AG