Ampeg SVT810E-AV User Manual
SVT810E/AV
Dual 4x10/8x10
Bass Cabinet
SVT-810E/AV
Your Ampeg SVT-810E/AV Dual Bass Cabinet is a high
quality speaker cabinet suitable for all sizes of venues. The
SVT-810E/AV can be “split” into two isolated 8 ohm, 4x10
cabinets via the jackplate connections. This allows each cabinet to be driven by a separate amplifier. Of course it may also
be connected in the Mono Mode to create a single 4 ohm,
8x10 cabinet that may be powered by a single amplifier.
The cabinet features an industrial strength grip bar and
heavy duty recessed wheels. Skid rails are placed on the back
of the enclosure to protect it while loading in and out of venues and vehicles. (Place a foot against one of the rails to tilt
the cabinet back.)
Dual Bass Cabinet
The Speakon®and 1/4” jacks are wired in parallel, allowing easy daisy chaining from one speaker to another. Each of
the jacks may be used as an input or a through connection.
Speakon®connectors are recognized as the standard for
professional installations, assuring a secure, permanent connection that won’t corrode, vibrate loose or be easily tampered with. The 1/4” jacks are convenient. However, the
Speakon®jacks are recommended when using power amplifiers over 150 watts, for permanent installations, or for the
“first” speaker among a number of daisy chained speakers.
Speakon®to 1/4” Wiring Diagram:
Loading...