Page 1
SVT18
Bass Cabinet
Page 2
SVT18 Bass Cabinet
Your Ampeg SVT18 Bass Cabinet is a high quality
speaker cabinet suitable for all venue sizes. The SVT18
features a Custom Designed 18,” cast frame, low frequency
driver matched to a computer-tuned enclosure.
The steel jackplate features both Speakon
®
and 1/4”
input/output jacks. The Speakon
®
and 1/4” jacks are wired
in parallel, allowing easy daisy chaining from one speaker
to another. Each of the jacks may be used as an input or a
through connection.
Speakon
®
connectors are recognized as the standard
for professional installations, assuring a secure, permanent
connection that won’t corrode, vibrate loose or be easily
tampered with. The 1/4” jacks are convenient. However,
the Speakon
®
jacks are recommended when using power
amplifiers over 150 watts, for permanent installations, or
for the “first” speaker among a number of daisy chained
speakers.
Speakon®to 1/4” Wiring Diagram:
Page 3
SVT18 Bass Cabinet
1: 1/4” Input / Output Jacks
2: Speakon
®
Input / Output Jacks
The SVT18 Jackplate:
Suggested Hookup Diagrams:
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
ST. LOUIS, MO 63133
MODEL: SVT18
POWER
HANDLING: 500 WATTS RMS
HANDLING: 1000 WATTS PROGRAM
IMPEDANCE: 4 OHMS
1 1
2 2
7 43565 15531 9
(Place Serial Number label here)
(21) SERIAL# BMCDN20083
Line: Freq: Pwr :
SPEAKONS
INPUTS
47-327-18
SVT18
®
1+ = POS (+)
:
1– = NEG (–)
POWER AMP
4 OHMS
POWER AMP
2 OHMS
Page 4
Ampeg continually develops new products, as well as improves existing ones. For this reason,
the specifications and information in this manual are subject to change without notice.
47-068-18 • 100302
AMPEG SVT18
Bass Cabinet
©2002 AMPEG, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
CAUTION: THIS SPEAKER IS CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER
CAUTION IS ADVISED, AND EAR PROTECTION RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.
TECHNICAL SPECIFICATIONS:
TYPE Single 18” Bass Enclosure
FREQ RESPONSE (+/-3dB) 35Hz – 2kHz
USABLE LOW FREQ (-10dB) 28Hz
POWER HANDLING 500W RMS, 1000W Peak
IMPEDANCE 4 ohms
SENSITIVITY 97dB SPL 1w/1m
MAXIMUM SPL 130dB
COMPONENTS Custom Designed 18” low frequency driver
DIMENSIONS (H x W x D) 25” x 24” x 22-1/2”
WEIGHT 86 lbs.
Speakon®is a registered TM of Neutrik AG
Loading...