Amped wireless TAP-R3 User Manual

v070715

SETUP GUIDE

ModemInternet

READ FIRST

GOT QUESTIONS?

Phone: [phone] or 909-217-3168
Email: [e-mail]
Web: www.ampedwireless.com/support

HIGH POWER TOUCH SCREEN AC1750 WI-FI ROUTER

Getting to Know the Router

LCD Screen:

1

Stylus:

2

3

Antenna
Connector:

USB Port:

4

5

6

Stand/Cable
Organizer:

7

8

Modem:

4" LCD touch screen. Displays the user interface for
configuring the Router.

Input tool that assists in navigating the LCD
touch screen menu.

RJ-SMA antenna connector. Compatible with
antennas that have RP-SMA connectors.

USB 2.0 Port used to attach USB storage devices, such as
a USB flash drive or external hard drive, for file sharing.

Turn the Router on or off.Power Switch:

Attach and fasten to the mounting holes on the
back of the Router.

Power adapter port. DC 12V, 2A.Power (PWR):

RJ-45 Gigabit port for connecting to your Broadband Modem.

3

TAP-R3

Stylus

2

1

7 1098

4

5

6

9

Wired Ports:

Reset:

10

1

2

RJ-45 Gigabit ports for connecting wired computers or network devices.

Button used to reset device. Push down once to reboot,
hold down for 5-10 seconds to reset to factory default settings.

Setting Up Your Router

Disconnect & Power Off your
Existing Router

Disconnect your existing router from your computer, your
broadband modem, and a power outlet. If you do not have
an existing router please continue to Step 2.

Power Off your Modem

Power off the modem by disconnecting the modem’s power
adapter from the power outlet. If your modem has a backup
battery, remove the backup battery from your modem.

(if available)

Modem

Existing Router

Remove

Backup Battery

3

Power Adapter

4

Do NOT power on your modem until Step 4.

Connect the Router to your Modem

a

Use the included blue Ethernet cable and
connect one end of the cable to your modem.

a

Modem

b

Connect the other end of the cable to the blue

b

Modem

port on the back of the Router.

Do NOT connect the power adapter to the
Router at this time.

Power On your Modem

Plug in the power adapter and reinsert the backup battery
(if available) to power on the modem.

Modem

Reinsert

Backup Battery

5

Allow a minute or two for the modem to initiate.

Attach Antenna & Power On

a

c

b

Modem

a

Attach the included antenna and product
stand.

Attach the Power Adapter to the Router's

b

PWR

port and plug it into an available
power outlet.

(On the right panel, make sure switch is ON.)

c

The Amped Wireless logo will appear
as the unit boots up, then the Dashboard
screen will appear.

Included product stand doubles as a cable organizer.

6

Welcome to the Dashboard

The Dashboard will provide you with the current status
of the Router.

If your router is already configured and has Internet
access, tap Wi-Fi Setup to configure your Wi-Fi
networks and skip ahead to Step 9 of this Setup
Guide.

If your router is not configured yet, tap Basic Setup to
launch the Setup Wizard.

7

If you have not already done so in Step 2, please
reboot your Modem and check that your Modem is
connected to the Router. Once this is complete tap

Next.

Internet Connection Setup

Select Automatic Setup (DHCP) to have the Wizard
automatically configure your Internet connection.

For more advanced users who wish to manually
configure their IP address settings, please tap

Manual/Static IP.

For Internet Service Providers that require a login and
password to access the Internet, tap Setup Requiring

a Login. This login is not the login you use to access

the Wi-Fi network. If you are not sure what this is
please contact your Internet Service Provider.

8

Automatic Setup - Welcome to the Setup Wizard

The Wizard will try to detect your Internet settings and
configure the Router. Please be patient.

If there is a problem with the Automatic Setup, the
Wizard will notify you of the issue. If you continue to
have problems, contact our Elite Support department
at 888-573-8820.

If the Internet connection detection was successful, you
will see a green check mark.

Tap Next to continue.

9

Personalize your Wi-Fi Settings

The default IDs of your 5GHz Wi-Fi network and

2.4GHz Wi-Fi network are: Amped_TAPR3_5.0 and

Amped_TAPR3_2.4

To change it, tap the SSID field to configure the name of your
Wi-Fi network. Users connecting wirelessly to the Router will
use these IDs to identify your Wi-Fi networks.

The default Security Key of your Wi-Fi networks is: wireless.

To change it, tap the Security Key field and enter a new key for
each Wi-Fi network. The keys must be at least 8 characters long.

Click Next to apply your settings.

10

Setup Summary

Navigating the Touch Menu

Home Button:

Language Selection:

Tap the Home icon, found on the bottom of many screens,
to return to the Dashboard at any time.

Tap the Globe icon, found on the bottom of the Settings
screen, to change the language of the menu.

Congratulations, the Router is now configured. The
Setup Summary provides you with the details of your
setup. You may now connect additional devices directly
to the 4 wired ports on the bottom panel or connect
wirelessly to the Router.

Enjoy your new Amped Wireless network!

Back Arrow:

Navigation:

Keyboards/Keypads:

See back for additional connection instructions and features.

Tap the Left Arrow, found on the upper left corner of many
screens, to navigate back to the previous page.

Tap the Left or Right Arrow to navigate between multiple
pages for one screen. The dots in this example indicate
there are 3 pages to see.

Tap on a Blank Field to access a keyboard or keypad
for entering in information such as your Network ID and
Security Key.

v062715

This is the second page of the Setup Guide. Start on the opposite side first.

How to Connect to the Router

The network ID and password listed below are the default Wi-Fi network settings.

Your network ID and password will be different if you have already configured the Router.

TAP-R3

Windows 7 & Vista

Click on the Wireless icon to see available wireless
networks (For Vista, click Start > Connect To). Select
the Amped_TAPR3_5.0 or Amped_TAPR3_2.4 network
and click Connect. When prompted for a password,
enter "wireless".

Amped_TAPR3_5.0

Mac OS X

Click on the Wireless icon to see available wireless
networks. Select the Amped_TAPR3_5.0 or

Amped_TAPR3_2.4 network. When prompted for a

password, enter "wireless".

Windows 8

Swipe in from the right edge to access the charms
bar, tap on Settings, select the Wi-Fi icon, and select
the Amped_TAPR3_5.0 or Amped_TAPR3_2.4
network. When prompted for a password, enter
"wireless".

Amped_TAPR3...

iPhone

Tap on your Settings icon, select Wi-Fi, and choose
the Amped_TAPR3_5.0 or Amped_TAPR3_2.4
network. When prompted for a password, enter
"wireless".

Amped_TAPR3_5.0

iPad Tablet

A. Press the Home button to get to the homepage.
B. Tap the Settings app icon.
C. Tap on Wi-Fi to enter the iPad’s Wi-Fi settings.
D. Toggle the Wi-Fi On/Off selector switch to On.
E. Under "Choose a Network...", select:

Amped_TAPR3_5.0 or Amped_TAPR3_2.4

F. When prompted, enter the wireless security key:
"wireless".

Android Tablet

A. Tap the Apps menu on the tablet screen.
B. Locate and tap the Settings app icon.
C. Under "Wireless & networks," tap Wi-Fi settings.
D. Tap the Wi-Fi box to turn on Wi-Fi and scan.
E. Under "Wi-Fi networks", select:

Amped_TAPR3_5.0 or Amped_TAPR3_2.4

F. When prompted, enter the wireless security key:
"wireless".

Amped_TAPR3...

Amped_TAPR3_5.0

Amped_TAPR3_5.0

Accessing More Settings

More Settings

The Settings menu
can be accessed
from the Dashboard.
Tap More Settings.

Wi-Fi Settings

Tap 2.4GHz or 5GHz Wi-Fi Settings to modify Wi-Fi related features:

Change your network
SSID, Security Key
and other settings in

Basic Settings.

The More Settings
menu gives you
access to a number
of different features.
Scroll left/right to
access all settings.

Set up Guest

Networks with an ID

and Security Key
that’s different from
your primary network.

Control when your
Wi-Fi Network is on or
off with Access

Schedule.

Network Settings

Tap Network Settings to configure IP address settings:

View and adjust IP
and DHCP server
settings for your local
network with Local

Settings.

Security Settings

Adjust the distance
(output power) of your
Wi-Fi network using

Wireless Coverage

settings.

Configure the settings
for your Internet
(WAN) connection
with Internet Settings.

Tap Security Settings to access a number of security settings:

Control which
devices can access
your networks with
IP or MAC Address

User Access

controls.

Block all access to
websites containing
any keywords that
you choose with the

Blocked Websites

list.

Management Settings

Tap Management to access a number of administrative settings:

Set the timeout interval
for the screen to turn
off and set a passcode
to re-access the
screen using Screen

Settings.

Open the Router’s
firewall to allow
unrestricted access to
a single IP address or
device with DMZ.

Open ports on the
Router to allow remote
access for devices like
IP cameras or game
consoles with Port

Forwarding.

Set the time and date
from the Clock/Date
settings. Set the clock
to appear on the
screen after the
Router times out.

Check for the latest
software updates
using the Firmware

Update feature.

USB Storage

Tap USB Storage to access USB settings:

Share files locally
within your network
from any USB Stor­age device from the

Local Sharing menu.

Not all features listed. Access the menu for all settings.

View all devices
connected to the
Router from the

Connected Users

menu.

Share files remotely
by creating a FTP
Server from the FTP
menu.

More Detailed Settings are Available on the Web Menu

Connect your Internet Device to the Router

Amped_TAPR3...

Open your Web Browser & Access the Setup Menu

Enter the setup web address into your browser:

http://setup.ampedwireless.com

If the URL fails to open, then try: http://192.168.3.1

Recommended browsers: Google Chrome, Safari or Internet Explorer (8.0 and up). Do not use Firefox.

ACCESSING THE WEB MENU DOES NOT REQUIRE INTERNET ACCESS.

THE MENU IS SERVED FROM THE ROUTER.

The web menu Dashboard will provide you with the current status of
the Router. The More Settings tab on the left will give you access to
more extensive settings.

NOTE: IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU

IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU...

Disable third-party firewalls such as Norton, ZoneAlarm or Windows Defender.

Check to see that your computer is NOT connected to any wireless networks.

Accessing the setup menu does not require Internet access. The menu is served from the Router.

How to Reset the Router to Default Settings

There are three options to reset the Router back to factory default settings:

1

Bottom Panel of the Router
Hold down the Reset button for five to ten (5-10) seconds. You may need to
use a pen tip or pin to access the button. Pressing the Reset Button for less
than five (5) seconds will simply reboot the Router while saving your existing
settings.

2

Touch Menu
Tap the Reset button through the touch menu: More Settings > Management
> Reset Settings. Select Reset All Settings.

3

Web Menu
Access the Reset button through the web menu on the left side: More Settings
> Management > Save/Reload Settings. Select Reset Settings to Default.

If you continue to have issues setting up the Router, give us a call — we’re here to help: 888-573-8820 or 909-217-3168

Visit our website for more support information and answers to frequently asked questions: www.ampedwireless.com/support

Reset Button

Amped Wireless

A Division of Newo Corporation
Copyright © 2015 Amped Wireless / Newo Corporation. All rights reserved.
Amped Wireless, Newo Corporation, Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.