Amped wireless TAP-EX3 User Manual

v052615

SETUP GUIDE

GOT QUESTIONS?

Phone: [phone] or 909-217-3168
Email: [e-mail]
Web: www.ampedwireless.com/support

READ FIRST

HIGH POWER TOUCH SCREEN
AC1750 WI-FI RANGE EXTENDER

Getting to Know the Range Extender

LCD Screen:

1

Stylus:

2

3

Antenna
Connector:

USB Port:

4

5

6

Stand/Cable
Organizer:

7

8

4" LCD touch screen. Displays the user interface for
configuring the Range Extender.

Input tool that assists in navigating the LCD
touch screen menu.

RJ-SMA antenna connector. Compatible with
antennas that have RP-SMA connectors.

USB 2.0 Port used to attach USB storage devices, such as
a USB flash drive or external hard drive, for file sharing.

Turn the Range Extender on or off.Power Switch:

Attach and fasten to the mounting holes on the
back of the Range Extender.

Power adapter port. DC 12V, 2A.Power (PWR):

RJ-45 Gigabit ports for connecting wired computers or network devices.Wired Ports:

TAP-EX3

Stylus

2

1

3

7 98

4

5

6

9

1

Reset:

Button used to reset device. Push down once to reboot,
hold down for 5-10 seconds to reset to factory default settings.

Setting Up Your Range Extender

Find an Optimal Setup Location Between your Wireless Router
and your Wireless Dead Zone

Wi-Fi Range Extender

Wi-Fi Router

IMPORTANT:

2

Power on the Range Extender

a

RECOMMENDED

SIGNAL STRENGTH

c

>70%

Dead ZoneHome/Office Network

PLACE THE RANGE EXTENDER IN A LOCATION
WHERE IT CAN RECEIVE A STRONG SIGNAL
FROM YOUR WIRELESS ROUTER.

This can be done before or after setup is complete. The Range Extender will save your settings.

a

Attach the included antenna and product stand.

Attach the Power Adapter to the Range Extender's

b

PWR

port and plug it into an available power
outlet.

ON.)

c

b

The Amped Wireless logo will appear as the unit
boots up, then the Dashboard screen will appear.
This process may take up to 2 minutes.

(On the right panel, make sure the Power switch is

3

4

Included product stand doubles as a cable organizer.

Welcome to the Dashboard

The Dashboard will provide you with the current status
of the Range Extender.

Tap Scan to find available networks to extend.

Note: The Setup Guide will refer to the existing network that you wish to extend
as the Home Network. The new, expanded network will be referred to as your
Extended Network.

Scan for a 2.4GHz Home Network to Extend

5

The Range Extender can extend a single 2.4GHz network, a single 5GHz network or both (2.4GHz
and 5GHz) simultaneously. The wizard will walk you through the setup of the 2.4GHz network first,
and then the 5GHz network.

Select the 2.4GHz Wi-Fi network that you wish to extend.
If you wish to only extend a 5GHz network and not a

2.4GHz network, tap Skip to move on to the 5GHz
network selection (Section 6).

Otherwise, tap Next to continue.

Recommended Signal

>70%

Poor signal connections may cause slow speeds or
dropped connections. If you do not see your desired
wireless network, move the Range Extender closer to
the router and scan again as it may be out of range.

Select the Wi-Fi network with a signal
strength greater than 70% for the most
reliable connection.

Home Network Security Settings (if necessary)

6

If your 2.4GHz Home Network has security enabled, you
will need to enter the key here.

Tap Next to continue.

Scan for a 5GHz Home Network to Extend

Select the 5GHz Wi-Fi network that you wish to extend.
If you have already selected a 2.4GHz network and do not
wish to select a 5GHz network, tap Skip to continue.

Otherwise, tap Next to continue.

Recommended Signal

>70%

Select the Wi-Fi network with a signal
strength greater than 70% for the most
reliable connection.

7

8

Poor signal connections may cause slow speeds or
dropped connections. If you do not see your desired
wireless network, move the Range Extender closer to
the router and scan again as it may be out of range.

Home Network Security Settings (if necessary)

If your 5GHz Home Network has security enabled, you
will need to enter the key here.

Tap Next to continue.

Configure Settings for your Extended Network

The Range Extender features both a 2.4GHz and a 5GHz Extended Network. The wizard will walk
you through the setup of your 2.4GHz extended network first, and then the 5GHz extended network.

The default ID of your 2.4GHz Extended Network is:

Amped_TAPEX3_2.4

If you choose to Clone Settings from your Home Network,
the wizard will copy the SSID and Security Key of your
Home Network. The SSID of the Extended Network will
have a "_RE" at the end of its name. For example:
Home_Network_RE

You can also manually enter a new Network ID and Security
Key. The new Security Key must be at least 8 characters
long.

Tap Next to apply the settings. Repeat these steps for
your 5GHz Extended Network.

The default ID of your 5GHz Extended Network is:

Amped_TAPEX3_5.0

If you choose to Clone Settings from your Home Network,
the wizard will copy the SSID and Security Key of your
Home Network. The SSID of the Extended Network will
have a "_RE" at the end of its name. For example:
Home_Network_RE

9

You can also manually enter a new Network ID and Security
Key. The new Security Key must be at least 8 characters
long.

Tap Next to apply the settings.

The Setup Wizard will apply your settings. Please be
patient. If there are any problems with the connection,
a prompt will appear letting you know what to fix.

Setup Summary

At this point you can connect your Wi-Fi devices to
your Extended Network using the Wi-Fi network name
and password on the screen.

If you haven’t already positioned your Range Extender
in an optimal location, you may do so now. All Range
Extender settings are saved and can be safely
powered off for relocation.

You may also attach any wired network devices to the
wired ports on the side of the Range Extender.

If you experience any problems during this process, please
contact Amped Wireless Elite Support:

Phone: [phone] or 909-217-3168
Email: [e-mail]
Web: www.ampedwireless.com/support

Amped_TAPEX3

See back for additional connection instructions and features.

v090415

This is the second page of the Setup Guide. Start on the opposite side first.

Navigating the Touch Menu

Home Button:

Tap the Home icon, found on the bottom of many screens,
to return to the Dashboard at any time.

Language Selection:

Tap the Globe icon, found on the bottom of the Settings
screen, to change the language of the menu.

Back Arrow:

Tap the Left Arrow, found on the upper left corner of many
screens, to navigate back to the previous page.

Navigation:

Tap the Left or Right Arrow to navigate between multiple
pages for one screen. The dots in this example indicate
there are 3 pages to see.

Keyboards/Keypads:

Tap on a Blank Field to access a keyboard or keypad
for entering in information such as your Network ID and
Security Key.

How to Connect to the Range Extender

Connecting to the 5GHz network requires that you have a 5GHz capable network adapter.

Windows 10 & 8

Access the taskbar on the bottom right of your screen,
tap on the Wi-Fi icon, enable Wi-Fi, and select

Amped_TAPEX3_2.4 or Amped_TAPEX3_5.0. When

prompted for a password, enter "wireless".

Amped_TAPEX3

Network01

Network02

Mac OS X

Click on the Wireless icon to see available wireless
networks. Select the Amped_TAPEX3_2.4 or

Amped_TAPEX3_5.0 network.

Windows 7 & Vista

Click on the Wireless icon to see available wireless
networks (For Vista, click Start > Connect To).
Select Amped_TAPEX3_2.4 or

Amped_TAPEX3_5.0 network and click Connect.

When prompted for a password, enter "wireless".

Wireless Network

Wireless Network

iPhone

Tap on your Settings icon, select Wi-Fi, and choose
the Amped_TAPEX3_2.4 or Amped_TAPEX3_5.0
network.

Amped_TAPEX3

iPad Tablet

A. Press the Home button to get to the homepage.
B. Tap the Settings app icon.
C. Tap on Wi-Fi to enter the iPad’s Wi-Fi settings.
D. Toggle the Wi-Fi On/Off selector switch to On.
E. Under "Choose a Network...", select Amped_TAPEX3_2.4

or Amped_TAPEX3_5.0

Android Tablet

A. Tap the Apps menu on the tablet screen.
B. Locate and tap the Settings app icon.
C. Under "Wireless & networks," tap Wi-Fi settings.
D. Tap the Wi-Fi box to turn on Wi-Fi and scan.
E. Under "Wi-Fi networks", select: Amped_TAPEX3_2.4 or

Amped_TAPEX3_5.0

Amped_TAPEX3

Amped_TAPEX3

Amped_TAPEX3

Accessing More Settings

More Settings

The Settings menu
can be accessed
from the Dashboard.
Tap Settings.

Wi-Fi Settings

Tap 2.4GHz or 5GHz Wi-Fi Settings to modify Wi-Fi related features:

Change your Home
or Extended Network
SSID, Security Key
and other settings in

Home Network or
Extended Network

settings.

The Settings menu
gives you access to a
number of different
features. Scroll
left/right to access all
settings.

Set up Guest

Networks with an ID

and Security Key
that’s different from
your primary network.

Control when your
Wi-Fi Network is on
or off with Access

Schedule.

Management Settings

Tap Management to access a number of administrative settings:

Set the timeout interval
for the screen to turn
off and set a passcode
to reaccess the screen
using Screen Settings.

Check for the latest
software updates
using the Firmware

Update feature.

Adjust the distance
(output power) of your
Wi-Fi network using

Wireless Coverage

settings.

Set the time and date
from the Clock/Date
settings.

Share files locally from
any USB storage
device from the USB

Storage Sharing

menu.

BoostBand™ Technology

Increase the overall speed and performance of your extended network by
streamlining dual band network traffic through a single Wi-Fi frequency band
between the Router and the Range Extender.

More Detailed Settings are Available on the Web Menu

Connect your Internet Device to the Range Extender

BOOSTBAND

Up to 2X Speed

Router

Not all features listed. Access the menu for all settings.

™

*

HIGH POWER TOUCH SCREE N

AC1750 WI- FI RANGE EXT ENDER

TAP-EX3

2.4GHz Wi-Fi
5GHz Wi-Fi

Amped_TAPEX3

Open your Web Browser & Access the Setup Menu

Enter the setup web address into your browser:

http://setup.ampedwireless.com

If the URL fails to open, then try: http://192.168.1.240

Recommended browsers: Google Chrome, Safari or Internet Explorer (8.0 and up). Do not use Firefox.

ACCESSING THE WEB MENU DOES NOT REQUIRE INTERNET ACCESS.

THE MENU IS SERVED FROM THE RANGE EXTENDER.

The web menu Dashboard will provide you with the current status of the
Range Extender. The More Settings tab on the left will give you access
to more extensive settings.

IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU...

a

a) Disconnect your PC from all Wi-Fi networks.

b

b) Attach an Ethernet cable (not included) between the PC and the Range Extender.

c

c) Open your web browser and go to http://setup.ampedwireless.com again.

How to Reset the Range Extender to Default Settings

There are three options to reset the Range Extender back to factory default settings:

1

Bottom Panel of the Range Extender
Hold down the Reset button for five to ten (5-10) seconds. You may need to
use a pen tip or pin to access the button. Pressing the Reset button for less
than five (5) seconds will simply reboot the Range Extender while saving your
existing settings.

2

Touch Menu
Tap the Reset button through the touch menu: More Settings > Management
> Reset Settings. Select Reset All Settings.

Reset Button

3

Web Menu
Access the Reset button through the web menu on the left side: More Settings
> Management > Save/Reload Settings. Select Reset Settings to Default.

If you continue to have issues setting up the Range Extender, give us a call — we’re here to help: 888-573-8820 or 909-217-3168

Visit our website for more support information and answers to frequently asked questions: www.ampedwireless.com/support

Amped Wireless

A Division of Newo Corporation
Copyright © 2015 Amped Wireless / Newo Corporation. All rights reserved.
Amped Wireless, Newo Corporation, Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.