American Standard T990.5XX User Manual
Installation
Instructions
DECK MOUNT
TUB FILLERS
COLONY DIVERTER & PERSONAL
SHOWER TRIM KIT
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
T990.5XX
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
M916803-0070A
METAL LEVER
M918075-0070A
HANDLE SCREW
M918504-0070A
ADAPTER SCREW
M918021-0070A
ADAPTER
HANDLE
M961463-0020A
HAND SHOWER
033760-0070A
HAND SHOWER
M961460-0020A
VALVE
ESCUTCHEON
SEAL KIT
M961464-0020A
HAND SHOWER
HOLDER
Certified to comply with ANSI A112.18.1
U.S. Patent No. D403,750
028667-0020A
HAND SHOWER
HOSE AND SEALS
(AVAILABLE WITH R890)
M968762
INSTALL DIVERTER VALVE TRIM
1
REMOVE THE DIVERTER GUARD.
Place the ESCUTCHEON SEAL over the DIVERTER BODY.
Thread the VALVE ESCUTCHEON into the DIVERTER BODY.
Align the HANDLE STEM with the SLEEVE as necessary.
Thread the VALVE ESCUTCHEON into the BODY until the
ESCUTCHEON contacts the finished deck.
DIVERTER
GUARD
HANDLE
STEM
ESCUTCHEON
SEAL
SLEEVE
VALVE
ESCUTCHEON
FINISHED
DECK
S
R
INSTALL HANDLE TRIM
2
Turn HANDLE STEM fully clockwise (Tub Filler position).
Place the HANDLE ADAPTER on the HANDLE STEM.
Install the ADAPTER SCREW and tighten securely.
METAL
LEVER
HANDLE
HANDLE
SCREW
ADAPTER
SCREW
Position LEVER HANDLE and place on ADAPTER. Install
ADAPTER
the HANDLE SCREW and tighten securely.
INSTALL HAND SHOWER
3
Unscrew the HOLDER from the SHOWER ESCUTCHEON. Slip the
SHOWER HOSE through the HOLDER and the SHOWER ESCUTCHEON.
Insert a SEAL WASHER into the SHOWER HOSE CONNECTOR.
Pull out the SLEEVE GUARD and HOSE. Unthread the SLEEVE GUARD
from the HOSE END connection. Be careful not to allow the HOSE to
fall back through the SLEEVE.
Thread the SHOWER HOSE onto the HOSE END connection and tighten
securely.
SLEEVE
GUARD
SHOWER HOSE
EAL WASHE
HANDLE
STEM
HAND SHOWER
SEAL WASHER
SHOWER HOSE
HOLDER
SHOWER ESCUTCHEON
RUBBER RING
HOSE END
HOSE
SLEEVE
Apply a sealant around the HOSE HOLE.
Thread the SHOWER ESCUTCHEON into the SLEEVE until the ESCUTCHEON
contacts the finished deck.
Loosen the SET SCREW in the SHOWER ESCUTCHEON and rotate the
ESCUTCHEON towards the center of the tub. Retighten the SET SCREW.
Thread the HOLDER into the SHOWER ESCUTCHEON.
Insert a SEAL WASHER into the SHOWER HOSE
connector and connect the HAND SHOWER.
Place the HAND SHOWER into the HOLDER.
HAND SHOWER
SEAL WASHER
HOLDER
SET SCREW
SHOWER
ESCUTCHEON
SLEEVE
SEALANT
HOTLINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Weekdays 8:00 a.m. to 7:00 p.m. Eastern Time
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Product names listed herein are trademarks of American Standard Inc.
©American Standard Inc. 2001
M968762
Loading...