American Standard 7196.001, 7196.804, SILHOUETTE 38, 7196.803, 7196.805 User Manual
SILHOUETTE™ 38" DUAL LEVEL KITCHEN SINK
• Americast® brand engineered material
• Dual level double bowl design
• Titanium enamel - heat resistant up to 1000°
• Acid-resisting glossy porcelain nish
• Top mount or undercounter installation
• Fits most standard 36" cabinet bases
• Silicone sealant supplied
• Available in 1, 3, 4, or 5 faucet hole
conguration
• Customized hole punchings available
(see page G56)
Top Mount/Undercounter:
❏ 7196.001 Center hole only
❏ 7196.803 3 hole
❏ 7196.804 4 hole
❏ 7196.805 5 hole
SILHOUETTE™ 38"
DUAL LEVEL SINK
AMERICAST
Shown here as a Top Mount (faucet not included)
®
Undercounter Installation Order:
❏ 791001-100 Mounting Kit (consists of
cut-out templates and mounting clips)
Nominal Dimensions:
965 x 559 x 241mm
(38" x 22" x 9-1/2")
Bowl sizes:
Right Hand: 318mm (12-1/2") wide
413mm (16-1/4") front to back
178mm (7") deep
Left Hand: 527mm (20-3/4") wide
476mm (18-3/4") front to back
229mm (9") deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
To Be Specied:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Basket Strainer: 4331.013
❏ Soap Dispenser: 4503.115, (specify color):
❏ Traps:
Optional Accessories:
❏ Large Wood Cutting Board: 9000.250
❏ Small Wood Cutting Board: 9000.185
❏ Colander for Cutting Board: 8102.100, Color:
❏ Large Colander: 8103.100, Color:
❏ Web Cover: 8106.100, Color:
❏ Bottom Sink Rack (Left): 7407.100, Color:
© 2008 AS America Inc.
* See faucet section for available models
G19
Revised 2/08
7196.803/804/805 Top Mount
3-1/ 2"
(89m m)
DIA.
2-1/ 8"
(54m m)
2"(51 mm)
OPTI ONAL
FINI SHED WALL
OR S PLASH BACK
7-7/ 8"
(200 mm)
8-1/ 8"
(206 mm)
1-1/ 2" (38 mm) DI A.
HOLE S TYP.
C/L
3/16 "
(5mm )
12-1 /4"
(311m m)
11-1/ 8"
(283 mm)
19"
(483 mm)
38"
(965 mm)
9-1/ 8"
(232 mm)
5-3/ 4"
(146 mm)
SEAL ING
COMP OUND
7-1/ 8"
(181 mm)
36" ( 914mm )
SUGG ESTED
FINI SHED
FLOO R
COUN TERTOP
(BY OTHER S)
22"
(559 mm)
*CU TOUT N OTE
7196 .804
4 HO LE
7196 .805
5 HO LE
1-1/ 2"
(38m m)
RAD .TYP.
1-1/ 2 O.D . TAILPI ECE
5-3/ 4"
(146 mm)
4"(10 2mm)
4" (1 02mm)4" (1 02mm) 4" (102mm )
1/2"
(13m m)
3/16 "
(5mm )
4"(102 mm)
4"(10 2mm)4"(10 2mm) 4"(10 2mm)
2" ( 51mm) OPTIO NAL
FINI SHED WALL
OR S PLASH BACK
7-7/ 8"
(200 mm)
8-1/ 8"
(206 mm)
1-1/ 2"
(38m m) DI A.
HOLE S TYP .
C/L
SEAL ING
COMP OUND
FINI SHED FLOOR
COUN TERTO P
(BY OTHER S)
*
CUTO UT
N OTE
7196 .804
4 HO LE
7196 .805
5 HO LE
1-1/ 2" O.D .
TAIL PIECE
MOUN TING C LIP
(SEE DETAI L)
DETAI L OF M OUNTI NG CLI P
(KIT No.791 001 - 100)
BRASS INSER T
3/4" MIN.
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
CLIP
MACH.
SCREW
SINK
3-1/ 2"
(89m m)
DIA.
2-1/ 8"
(54m m)
12-1 /4"
(311 mm)
11-3 /16"
(284 mm)
19"
(483 mm)
38"
(965 mm)
22"
(559 mm)
1-1/ 2"
(38m m)
RAD .TYP.
5-3/ 4"
(146 mm)
36" ( 914mm )
SUGG ESTED
5-3/ 4"
(146 mm)
9-1/ 2"
(241 mm)
7-1/ 2"
(191 mm)
SILHOUETTE™ 38"
DUAL LEVEL SINK
AMERICAST
NOTES:
COUNTERTOP CUTOUT 527mm x 933mm x 25mm RADIUS
*
(20-3/4 X 36-3/4 WITH 1" RADIUS) AT CORNERS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
®
NOTES:
TEMPLATE PROVIDED WITH MOUNTING KIT 791001-100 FOR
*
EXPOSED FAUCET DECK OR UNDERCOUNTER FAUCET DECK
COUNTERTOP CUTOUT VARIATIONS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
© 2008 AS America Inc.
Undercounter Mount
G20
Revised 2/08
Loading...