American Standard Hampton 7225.733 User Manual

GENERAL DESCRIPTION:

Cast brass valve body on 8 inch centers. 1/4 turn washerless ceramic disc valve cartridges - reversible for use with either lever or cross handles. 1/2" NPT female threaded inlets and outlets. Showerhead with 2.5gpm/9.5L/min. flow restrictor. Third handle provides positive diverting action between showerhead and tub spout.

7225.723 Shown

MODEL NUMBER:

7225.713 Bath/Shower Fitting

I.P.S. Tub Spout. Porcelain Lever handles.

7225.723 Bath/Shower Fitting

I.P.S. Tub Spout. Metal Cross handles.

7225.733 Bath/Shower Fitting

I.P.S. Tub Spout. Metal Lever handles.

SUGGESTED SPECIFICATION:

Three handle bath/shower fitting shall feature cast brass construction. Shall also feature 1/4 turn washerless ceramic disc valve cartridges that are reversible for use with cross or lever handles. Fitting shall be American Standard Model # 7225.____.___.

130mm

(5-1/8)REF.

(3) 46mm (1-13/16) DIA. HOLES FOR VALVES AND TRANSFER VALVE ON 203mm(8) CENTERS

CROSS BRACE

FINISHED

WALL

32mm(1-1/4)

DIA HOLE

64mm ± 22mm

(2-1/2 ± 7/8)

102mm

(4)

TOP OF

TUB RIM

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

1651mm - 1981mm

(65 - 78)

1/2" N.P.T.

SHOWER ARM

32mm

(1-1/4)

DIA HOLE

1/2" COPPER

45mm

(1-3/4)

28mm

(1-1/8)

DIA.

UNION INLET 1/2"-14 N.P.T.

1/2 N.P.T.

TO SHOWER

305mm

(12)

OPTIONAL

102mm

(4)

PRODUCT FEATURES:

Brass Construction: Durable - Ideal for prolonged contact

with water. Provides the finest surface for application of all finishes.

Ceramic Disc Valve Cartridges: Assures a lifetime of

drip-free performance.

Increased Rough-in: 42mm to 86mm (1-5/8 to 3-3/8). Exclusive Valve Escutcheon Design: 3 piece escutcheon

design accomodates deep and shallow rough-ins. Provides water tight seal around valves.

Integral Unions: No soldering required. Exclusive Handle Alignment System: Allows fine

tuning of handle position.

Choice of Finishes: Wide range of durable finishes. Exclusive Plaster Guard: Plaster guard can be used to

test for leaks prior to handle installation.

75mm

(3)

188cm FOR

HEAD

CLEARANCE

(74")

127 mm REF.

(5") REF.

178 mm REF.

(7") REF.

THREE-HANDLE BATH/SHOWER FITTING

HAMPTON

B29

HAMPTON

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ASME A112.18.1 CSA B 125

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E SS U R E ( P S I )

*Flow rates shown are for mixed hot and cold.

SHOWER

SPOUT

80604020

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

Product Number

Description

7225.713

Three handle Bath/Shower. Porcelain Lever handles.

7225.723

Three handle Bath/Shower. Metal Cross handles.

7225.733

Three handle Bath/Shower. Metal Lever handles.

Finish Options

Polished

Chrome

P.Chrome

/PVD

Brass

Mix

002

299

PVD

Polished

Brass

099

PVD

Blackened

Bronze

068

PVD

Satin/

Chrome

Mix

221

PVD Satin

Nickel

295

PVD Satin/ Brass

Mix

297

N/A = NOT AVAILABLE

N/AN/A N/A

N/AN/A

N/A

N/A N/A

THREE-HANDLE BATH/SHOWER FITTING

B30