American Standard Ceramix 2000.502 User Manual

2000.502 Shown.

GENERAL DESCRIPTION:

Forged brass valve body. Washerless 47mm ceramic disc valve cartridge permits easy control over both water temperature and volume. Hot limit safety stop. Spool type pressure balancing cartridge maintains output temperature in response to changes in relative hot and cold supply pressure. Check stops are included to prevent cross flow. Combination 1/2" NPT male threaded or direct sweat inlets and outlets. Adjustable spray showerhead with 2.5gpm/9.5L/min. flow restrictor. Brass diverter tub spout. Cast brass shower arm.

PRODUCT FEATURES:

Solid Brass Construction: Durable, ideal material for

prolonged contact with water.

Ceramic Disc Valve Cartridge: Assures a lifetime of

drip-free performance.

Pressure Balancing Valve: Maintains output

temperature in response to changes in relative hot and cold supply pressure.

Adjustable Hot Limit Safety Stop: Limits the amount

of hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Choice of Finishes: Polished Chrome or Satin Nickel PVD.

CERAMIX

PRESSURE BALANCE BATH/SHOWER FITTING

MODEL NUMBER:

2000.502 Pressure Balance Bath/Shower

Brass diverter spout. Adjustable showerhead.

2000.501 Pressure Balance Shower Only

Adjustable showerhead.

2000.500 Pressure Balance Valve Only

32mm(1-1/4)

DIA. HOLE

1/2" N.P.T. SHOWER ARM

64mm(2-1/2) MIN. 89mm(3-1/2) MAX.

OUTLETS-1/2" NPT OR 1/2" COPPER SWEAT FEMALE

48mm(1-7/8)

C/L

53mm(2-1/16)

INLETS-1/2" NPT OR 1/2" COPPER SWEAT

25mm(1)

19mm

(3/4)

1/2" NPT

SPOUT

NIPPLE

FINISHED WALL

229mm

(9)

200mm

(7-7/8)

13mm REF.

(1/2)

130mm

(5-1/8)

FITTING INLET

5-1/8"

(130mm)

107mm

(4-3/16)

DIMENSION

TOP OF TUB RIM

OPTIONAL

457mm

(18)

102mm

(4)

USUALLY BETWEEN 65" & 78"

OPTIONAL TO FINISHED FLOOR

32mm

(1-1/4)

DIA. HOLE

SUGGESTED SPECIFICATION:

Bath/shower fitting shall be forged brass construction with all brass spout and shower arm. Shall also feature washerless ceramic disc valve cartridge which allows user to control both water temperature and volume. Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American Standard Model # 2000.____.____.

L89

CERAMIX

PRESSURE BALANCE BATH/SHOWER FITTING

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 ASSE 1016 CSA B 125

Product Number

2000.502

Description

Pressure Balance Bath/Shower. Brass diverter tub spout.

FLOW RATE*

GALLONS PER MINUTE

*Flow rates shown are for mixed hot and cold.

INLET PRESSURE (PSI)

Finish Options*

Polished

Chrome

002

Spout Shower

12010080604020

PVD

Satin

Nickel

295

2000.501

Pressure Balance Shower Only. Brass showerhead.

2000.500 Pressure Balance Valve Only.

N/A = NOT AVAILABLE

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

*EverClean™ Finish:

• Offered on Polished Chrome (002) and Satin Nickel (295) finish.

• One wipe effortlessly removes spots.

• Eliminates the need for cleaners and scrubbing.

N/A N/A

L90