American Standard Cadet 6'x36 2773.002 User Manual
CADET™ 6' X 36" WHIRLPOOL AND
BATHING POOL
❏ 2773.018W Whirlpool featuring System I
• Acrylic with berglass reinforcement
• Pre-leveled tub bottom
• Form-tted backrest position
• Dual, molded in arm rests
• 2.1 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Eight multi-directional and ow-adjustable
jets including:
- Two Ideal-ow jets
- Four body massage jets
- Two recessed back-rest jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
CADET™ 6' x 36"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
❏ 2773.018WC EverClean
®
Whirlpool
Featuring System I:
• Same as 2773.018W except with the
EverClean System
❏ 2773.002 Bathing Pool only
Nominal Dimensions:
1829 x 908 x 502mm
(72" x 35-3/4" x 19-3/4")
Compliance Certications Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools and air baths with
EverClean® incorporate a patented silver-ion
additive right into the circulation piping to protect
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
To Be Specied - Required:
❏ Color:
❏ Bath Filler: (specify nish)
❏ Bath Drain: 1583.470 (specify nish)
To Be Specied - Optional:
❏ Safe-T-Heater*: 9075.120
❏ 6 Foot Acrylic Apron: 9372.018 (specify color)
❏ 6 Foot Apron: 9272.018 (specify color)
❏ Jet Trim Ring Kit: 9860.200-two per kit (specify nish)
❏ Universal Tile Bead Kit: 751755-100
❏ Grab Bar Kit: 9822.200-two per kit (specify nish)
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
© 2008 AS America Inc.
H57
Revised 2/08
CADET™ 6' x 36"
464 mm
(18-1/4)
38 mm
(1-1/2)
502 mm
(19-3/4)
1-1/2 O.D.TAILPIECE
LEVELING STRINGER
NOT FOR SUPPORT
ROUGH
FLOOR
70mm
(2-3/4)
305mm
(12)
OPT IONAL TO
FIN ISHED FLOOR
USU ALLY B ETWEEN
165 1 & 19 81mm
(65 & 78)
C/L OF
OVE RFLOW
102 mm
(4)
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
SHOWER ARM
70 mm
(2-3/4)
117 mm
(4-5/8)
1-1/2 N.P.T.M.
THREADS
INTEGRAL
SUPPORT
FEET
SAFE-T-HEATER
REMOVABLE
BLANK
RECOMMENDED FITTING LOCATION
64 X 330mm (2-1/2 x 13")
FOR PIER OR ISLAND
INSTALLATIONS ONLY
ALT. FITTING
LOCATION #1
1829 mm
(72)
908 mm
(35-3/4)
OUTLINE OF CUTOUT
1791 mm x 870 mm
(70-1/2 X 34-1/4)
454 mm
(17-7/8)
229mm
(9)
305 mm
(12)
57mm
(2-1/4)
(8) JETS
CUTOUT IN FLOOR
FOR DRAIN
PUMP
FINISHED
WALL
19 mm
(3/4)
229 mm
(9)
C/L OF DRAIN
(2) AIR VALVES
PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS
RECOMMENDED FITTING LOCATION
64 X 330mm (2-1/2 x 13")
FOR PIER OR ISLAND
INSTALLATIONS ONLY
ALT. FITTING
LOCATION
464 mm
(18-1/4)
38 mm
(1-1/2)
502 mm
(19-3/4)
1-1/2 O.D.TAILPIECE
INTEGRAL
SUPPORT
FEET
LEVELING STRINGER
NOT FOR SUPPORT
ROUGH
FLOOR
1829 mm
(72)
908 mm
(35-3/4)
OUTLINE OF CUTOUT
1791 mm x 870 mm
(70-1/2 X 34-1/4)
454 mm
(17-7/8)
229mm
(9)
305 mm
(12)
57mm
(2-1/4)
70 mm
(2-3/4)
CUTOUT IN FLOOR
FOR DRAIN
FINISHED
WALL
305 mm
(12)
OPT IONAL TO
FIN ISHED FLOOR
USU ALLY B ETWEEN
165 1 & 19 81mm
(65 & 78)
C/L OF
OVE RFLOW
102 mm
(4)
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
SHOWER ARM
70 mm
(2-3/4)
117 mm
(4-5/8)
1-1/2 N.P.T.M.
THREADS
19 mm
(3/4)
229 mm
(9)
C/L OF
SUPPLIES
C/L OF DRAIN
SEE FITTING
SPECS FOR
DIMENSIONS
72 x 3 5- 3/ 4 x 19-3/ 4 In .( 1829 x 90 8 x 50 2mm)
101 Lb s. ( 45 K g.)
751 Lb s. ( 34 1 Kg)
78 Gal . (2 96 L .)
64 Gal . (2 43 L .)
23 x 4 9 In . (5 84 mm x 1 24 5 mm)
65 x 2 9 In . (1 651 x 7 37 m m)
13-1/2 I n. ( 34 3 mm)
40 Lbs ./ Sq . Ft . (190 Kg s/ Sq . m.)
23.8
48.3
GENERA L SPE CIFICA TIONS FOR 2 773 W HIRLPOOL
INSTAL LE D SI ZE
WEIGHT
WEIGHT w /W AT ER
GAL. T O OV ER FL OW
MIN. O PE RA TI NG GAL.
BATHIN G WE LL A T SUMP
BATHIN G WE LL A T RIM
WATER DE PT H TO OVERFL OW
FLOOR LO AD IN G
(PROJE CT ED A RE A)
PTS.
CUBE ( FT3)
WHIRLP OOL E LECTRI CAL S PECIFI CATIO NS
2.1 HP , 14 .4 A MPS, 12 0V .SYSTEM I P UM P
72 x 3 5-3/4 x 1 9-3/4 I n.
(1829m m x 908 m m x 502 mm )
76 Lbs . (34 K g. )
725 Lb s. (326 K g. )
78 Gal . (296 L. )
23 x 4 9 In. ( 58 4 mm x 12 45 mm)
65 x 2 9 In. ( 16 51 x 73 7 mm )
13-1/2 I n. (3 43 m m)
38 Lbs ./ Sq. F t. ( 183 K gs /S q. m. )
23.8
48.3
GENERAL SPE CIFIC ATIONS FOR 2773 BATHI NG PO OL
INSTAL LE D SIZ E
WEIGHT
WEIGHT w /WATE R
GAL. T O OVERF LO W
BATHIN G WELL AT S UMP
BATHIN G WELL AT R IM
WATER DE PTH T O OV ERFLO W
FLOOR LO ADING
(PROJE CT ED AR EA )
PTS.
CUBE ( FT3)
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
© 2008 AS America Inc.
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF
BATH IS SUPPORTED BY INTEGR AL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 3 WALL TILING BEAD. KIT AND APRON NO. 9272.018 OR 9372.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.
● FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
H58
Revised 2/08
Loading...