American Standard 4010.012, 3027.012 User Manual

COMPACT™ SPACE SAVING ELONGATED TOILET

❑ 2149.012

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Exclusive space saving feature

• Elongated siphon action bowl

• Fits into same space as a conventional round front toilet

• Fully glazed trapway

• Close-coupled tank

• Sanitary bar

• 2 bolt caps

• 100% factory  ush tested

❑ 3027.012 Bowl ❑ 4010.012 Tank

COMPACT™ SPACE SAVING

ELONGATED TOILET

VITREOUS CHINA

Nominal Dimensions:

699 x 483 x 756mm (27-1/2" x 19" x 29-3/4")

Fixture only, seat and supply by others

Compliance Certi cations -

Meets or Exceeds the Following Speci cations:

• ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Spec i  ed:

❏ Seat: American Standard #5324.019 “Rise and Shine" solid plastic closed front seat with cover. ❏ Seat: American Standard #5311.012 “Laurel" molded closed front seat with cover.

❏ Alternate Seat: ❏ Supply with stop:

FINISHED WALL

699mm

25mm ± 6mm (1 ± 1/4)

187mm

(7-3/4)

83mm

(3-1/4)

165mm

(6-1/2)

305mm

(12)

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of  xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

(27-1/2)

C/L OF SEAT POST HOLES 140mm (5-1/2) CENTERS

470mm

(18-1/2)

16mm

(5/8)

248mm

(9-3/4)

381mm

(15)

FINISHED FLOOR

SUPPLY

REQ'D

222mm

(8-3/4)

483mm

(19)

235mm

(9-1/4)

368mm

(14-1/2)

152mm

756mm

(29-3/4)

(6)

K65

Revised 5/05