American Standard 4035.216, 4035.516, 2479.216, 2479.516, 3067.216 User Manual

0 (0)
American Standard 4035.216, 4035.516, 2479.216, 2479.516, 3067.216 User Manual

FloWise® DUAL FLUSH ELONGATED TOILET

WITH SEAT

2479.216

Vitreous china

Meets definition for HET (High Efficiency Toilet)

Low-consumption Dual Flush Toilet

Qualifies in LEEDS Program Full flush 6.0 Lpf/1.6 gpf, Partial flush 3.0 Lpf/0.8 gpf

Elongated wash down bowl

Internal trapway fully-glazed, 2-5/8" (67mm) trapway

Concealed trapway bowl

Chrome-plated top mounted push button actuator

Sanitary Dam on bowl

Includes color-matched plastic seat and cover

100% factory flush tested

2 color matched bolt caps

2 year warranty

2479.516

Same as above, except with tank with Aquaguard liner

Separate Component Parts:

3067.216 Elongated Bowl

4035.216 Unlined Tank

4035.516 Tank with Aquaguard Liner

Alternate Tank Configurations Available:

4035.516 Lined Tank

Nominal Dimensions:

31-1/4" x 17" x 30-1/8"

(794 x 432 x 765mm)

Fixture and seat only, supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

ASME A112.19.2M

CSA B45 series

City of Los Angeles Supplemental Purchase Specification

UNAR

US EPA WaterSense Specification for HETS

FloWise® DUAL FLUSH

ELONGATED TOILET

VITREOUS CHINA

'*/*4)&% 8"--

 

 

 

 

NN

 

 

 

NN NN

 

 

 

 

 

 

NN

 

 

 

 

 

 

 

 

 

NN

 

 

164)

 

 

 

 

#6550/

 

NN

 

$ -

 

 

 

 

 

 

 

 

 

 

$ -0' 4&"5 1045 )0-&4

 

 

 

NN $&/53&4

 

 

 

 

4611-:

 

 

 

 

"4

 

NN

 

 

3&2h%

 

NN

 

 

 

 

 

 

 

NN

 

 

 

 

 

 

 

 

 

 

 

 

 

NN

NN

 

 

 

 

 

 

 

NN

 

 

 

 

 

 

 

NN

 

'*/*4)&%

NN

 

NN

 

 

 

'-003

 

 

 

 

 

NN

 

 

 

$ -0' 065-&5

 

 

 

 

 

 

 

 

 

 

 

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12”) FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages

To Be Specified:

 

 

 

Color: White

 

 

 

Supply with stop:

 

 

Certified by

 

 

 

IAPMO R&T

 

 

K41

 

 

 

 

 

 

 

© 2008 AS America Inc. Revised 2/08

Loading...