American Standard 4007.516, 2459.016 User Manual

TROPIC CADET® 3

FINISHED WALL

FINISHED FLOOR

C/L OF OUTLET

SUPPLY

REQ'D.

235mm

(9-1/4)

768mm (30-1/4)

25mm ± 6mm (1 ± 1/4)

102mm

(4)

464mm (18-1/4)

476mm (18-3/4)

784mm (30-7/8)

419mm (16-1/2)

*203mm

(8)

305mm

(12)

356mm

(14)

213mm

(8-3/8)

C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS)

*352mm (13-7/8)

*152mm (6)

238mm

(9-3/8)

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

RIGHT HEIGHT™ ELONGATED TOILET

❑ 2459.016

• Vitreous china

• EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface

• Low-consumption (6.0 Lpf/1.6 gpf)

• 16-1/2" rim height for accessible application

• Features the Cadet® 3 Flushing System

• Elongated siphon action jetted bowl

• Fully-glazed 2-1/8" trapway with 2" ball pass

• Generous 9" x 8" water surface area

• Close-coupled tank with at tank cover for superior storage

• Oversized 3" ush valve with chemical resistant apper

• Chrome trip lever

• Speed Connect® tank-to-bowl coupling system

• Sanitary dam on bowl with four point tank stabilization

• 2 color-matched bolt caps

• 100% factory ush tested

• 5 year warranty

TROPIC CADET® 3

RIGHT HEIGHT™ ELONGATED TOILET

VITREOUS CHINA

❑ 3016.016 Right Height™ Elongated Bowl ❑ 4007.016 Tank

Nominal Dimensions: 768 x 476 x 784mm (30-1/4" x 18-3/4" x 30-7/8")

Fixture only, seat and supply by others

Alternate Tank Congurations Available:

❑ 4007.516 Tank complete with Aquaguard Liner

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power Supplementary Purchase Specication for Non-Adjustability

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Seat: #5325.010 Elongated Champion® Slow Close

solid plastic seat and cover with easy lift off feature ❏ Seat: #5284.016 Elongated EverClean®

anti-microbial solid plastic seat and cover

❏ Seat: #5321.110 EverClean® Elongated Seat with

Slow Close Snap-Off Hinges

❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may var y within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided page

K51

Revised 2/08