American Standard 3180.016, 2735.014 User Manual

ROUND FRONT RIGHT HEIGHT™ TOILET

19m m ± 6mm (1 ± 1 /4)

419 mm

(16 -1/ 2)

FIN ISH ED FLO OR

305 mm

(12 )

721 mm

(28 -3/ 8)

C/L OF OUT LET

83m m

(3- 1/4 )

216 mm (8- 1/2 )

419 mm

(16 -1/ 2)

C/L OF SEA T POST HOLES 140 mm (5-1 /2 CEN TERS)

379 mm

(14 -7/ 8)

267mm

(10-1/2)

16m m

(5/ 8)

873 mm

(34 -3/ 8)

479 mm

(18 -7/ 8)

SUP PLY

REQ 'D

284 mm

(11 -3/ 16)

152 mm

(6)

254 mm

(10 )

356 mm

(14 )

FIN ISH ED W ALL

FOO T O N

BOT TOM OF BOW L

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

TOWNSEND CHAMPION® 4 ROUND FRONT RIGHT HEIGHT™ TOILET

❑ 2735.014

• Vitreous china

• EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing

bacteria, mold, and mildew

• Low-consumption (6.0 Lpf/1.6 gpf)

• Features Champion®4 Flushing System performance platform

• 4" non-adjustable, piston action Accelerator™ ush valve

• 16-1/2" rim height for accessible applications

• Round Front siphon action jetted bowl

• 2-3/8" fully-glazed trapway

• Speed Connect™ tank/bowl coupling system

• Chrome-plated trip lever

• Sanitary pier on bowl

• 100% factory ush tested

• 2 bolt caps

• 10 year warranty

❑ 3180.016 Round Front Right Height™ Bowl ❑ 4281.014 Tank

TOWNSEND CHAMPION® 4

VITREOUS CHINA

Nominal Dimensions:

721 x 479 x 873mm (28-3/8" x 18-7/8" x 34-3/8")

Fixture only, seat and supply by others

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power Supplementary Purchase Specication for Non-Adjustability - July, 2003 revision

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Seat: (please specify color) ❏ Champion® Slow Close Round Front #5330.010 ❏ Rise & Shine Round Front #5322.011 ❏ Laurel Round Front #5308.014 ❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.

K22

Revised 07/07