MADERA™ 17" Height ELONGATED FLUSH VALVE TOILET
VITREOUS CHINA
BARRIER FREE
MADERA™ 17"H ELONGATED 10" ROUGH
•Flush valve toilet
•Vitreous china
•Low-consumption (6.0 Lpf/1.6 gpf)
•10" roughing-in
•17" rim height
•Elongated bowl
•Direct-fed siphon jet action
•Fully glazed 2-1/8" trapway
•10" x 12" water surface area
•1-1/2" top spud
•2 bolt caps
•100% factory flush tested
3043.102 Elongated bowl only, top spud
Component Parts:
047007-0070A Inlet spud (furnished with bowl)
481310-100 Bolt caps with retainers (furnished with bowl)
Nominal Dimensions:
765 x 381 x 438mm
(30-1/8" x 15" x 17-1/4")
Recommended working pressure – between 25 psi at valve when flushing and 80 psi static
Fixture only, seat and flush valve by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
1" N.P.T. OR 1" C.W.T. SUPPLY TO FLUSH VALVE
FINISHED WALL
102mm
(4)
41mm (1-5/8)
765mm (30-1/8)
470mm (18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2) CENTER
121mm
(4-3/4) 
730mm (28-3/4)
381mm
(15)
1-1/2 SPUD
438mm (17-1/4)
127mm |
346mm |
FINISHED FLOOR |
|
(5) |
(13-5/8) |
||
229mm |
|||
|
|
||
13mm |
|
(9) |
|
C/L OF OUTLET |
|
||
(1/2) |
|
||
|
|
||
254mm |
|
|
|
(10) |
|
|
To Be Specified:
Color: White Bone Silver Linen
Seat: 5901.100 American Standard Seat
5901.110 American Standard Seat with EverClean®
Alternate Seat: 5905.100 Heavy Duty American Standard Seat
5905.110 Heavy Duty American Standard Seat with EverClean
Flush Valve:
American Standard Selectronic™ #6065.161.002 DC Power (Top Spud)
©2008 AS America Inc.
NOTES:
PRODUCT 3043.102 SHOWN.
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON FLUSH VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES.
M64
Revised 11/08
Loading...