American Standard 3128.018, Cadet 4112.016, Cadet 4110.016, 2315.016, 5385.010 User Manual
BABY DEVORO™ 10" HIGH ROUND
102 mm (4)
622 mm
(24 -1/2)
FIN ISHED WALL
C/L SEAT POST HOLES
140 mm ( 5-1/2) CENTE RS
381 mm
(15 )
178 mm
(7)
254 mm
(10 )
273 mm
(10 -3/4)
C/L OUTLE T
13m m
(1/ 2)
318 mm
(12 -1/2)
229 mm
(9)
C/L
260 mm
(10 -1/4)
159 mm
(6- 1/4)
152 mm
(6)
660mm
(26)
FINISHED
FLOOR
SUPPLY
AS
REQ'D
*
184m m
(7-1 /4)
19mm ± 6mm
(3/4 ± 1/4 )
495m m
(19- 1/2)
FRONT TOILET
❏ 2315.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 10-1/4" rim height
• 10" roughing-in
• Siphon ush action
• AquaForce™ ushing technology
• Speed Connect® tank/bowl coupling system
• Color matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory ush tested
• Fully-glazed trapway
❏ 3128.018 Bowl with bolt caps
❏ 4110.016 Tank complete with coupling
components and tank trim
BABY DEVORO™ 10" HIGH
ROUND FRONT TOILET
VITREOUS CHINA
Also available for 12" and 14" rough-in
installations:
❏ 4112.016 12" Rough Tank
❏ 4114.016 14" Rough Tank
Nominal Dimensions:
622 x 495 x 660mm
(24-1/2" x 19-1/2" x 26")
Component parts:
❏ 5385.010 Seat and cover
(in white and bone only)
Fixture only, seat and supply by others
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone
❏ Seat: Olsonite #126-CC open front seat less cover
❏ Seat: Church #1580C open front seat less cover
❏ Supply with Stop:
© 2008 AS America Inc.
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM
DIMENSION OF 254mm (10) FROM FINISHED WALL TO C/L OF OUTLET
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
SUPPLY NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
M48
Revised 7/06
Loading...