American Standard 2018.214, 4266.014, 4266.504, 3121.016 User Manual

CHAMPION® 4 ELONGATED TOILET

❑ 2018.214

• Vitreous china

• EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold,

and mildew on the surface

• Low-consumption (6.0 Lpf/1.6 gpf)

• Features Champion® 4 Flushing System performance platform

• 4" non-adjustable, piston action Accelerator™

ush valve

• Elongated siphon action jetted bowl

• 2-3/8" fully-glazed trapway

• Speed Connect® tank/bowl coupling system

• Chrome-plated trip lever

• Sweeping pier on bowl

• 100% factory ush tested

• 2 bolt caps

• 10 year warranty

❑ 3121.016 Bowl ❑ 4266.014 Tank

CHAMPION® 4

ELONGATED TOILET

VITREOUS CHINA

Nominal Dimensions:

772 x 464 x 797mm (30-3/8" x 18-1/4" x 31-3/8")

Fixture only, seat and supply by others

Alternate Tank Congurations Available:

❑ 4266.504 Tank complete with Aquaguard Liner ❑ 4266.604 Tank complete with tank cover

locking device

❑ 4266.704 Tank complete with Aquaguard Liner

and tank cover locking device

❑ 4266.804 Tank complete with trip lever

located on right side

❑ 4266.904 Tank complete with tank cover locking

device and trip lever located on right side

❑ 4266.954 Tank complete with Aquaguard Liner,

tank cover locking device, and trip lever on right side

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power Supplementary Purchase Specication for

Non-Adjustability - July, 2003 revision

SEE REVERSE FOR ADDITIONAL ROUGHING-IN DIMENSIONS

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Design Matched Seat: #5280.016 ❏ Alternate Seats:

❏ Champion® Slow Close Elongated #5325.010 ❏ Rise & Shine Elongated #5324.019

❏ Rise & Shine Elongated-Open Front #5325.024 ❏ EverClean® Elongated Seat with Slow Close

Snap-Off Hinges #5321.110

❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may var y within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K35

Revised 2/08

FIN ISHE D WALL

51m m ± 6mm (2 ± 1/ 4)

387 mm

(15 -1/4 )

FIN ISHE D FLO OR

305 mm

(12 )

772 mm

(30 -3/8 )

C/L OF OUTLET

83m m

(3- 1/4)

235 mm (9- 1/4)

470 mm

(18 -1/2 )

C/L OF SEAT P OST HO LES 140 mm ( 5-1/2 CENTER S)

362 mm (14 -1/4 )

264mm

(10-3/8)

16m m

(5/ 8)

797 mm

(31 -3/8 )

464 mm

(18 -1/4 )

SUP PLY

REQ 'D

254 mm

(10 )

152 mm

(6)