American Standard 2431.010, 3046.016 User Manual

FINISHED WALL

FINISHED FLOOR

C/L OF OUTLET

191mm

(7-1/2)

716mm (28-1/4)

15mm

(5/8)

102mm

(4)

470mm (18-1/2)

381mm

(15)

305mm

(12)

296mm (11-5/8)

267mm

(10-1/2)

C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS)

SUPPLY

REQ'D.

439mm (17-1/4)

733mm (28-7/8)

*203mm

(8)

355mm

(14)

*152mm

(6)

236mm (9-5/16)

COMPACT CADET® 3 ELONGATED TOILET

❑ 2431.010

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Space saving compact design - Elongated bowl ts in the same space as a round front toilet

• 12" (305mm) Rough-in

• EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface

• Featuring the Cadet® 3 Flushing System

• Elongated siphon action jetted bowl with

2-1/8" trapway

• Internal trapway area fully glazed

• Generous 8" x 9" water surface area

• Close coupled tank with at tank cover for

superior storage

• Oversized 3" Flush Valve with Chemical

Resistant Flapper

• Speed Connect® tank to bowl coupling system

• Sanitary dam on bowl with four point tank stabilization

• 2 color match bolt caps

• Chrome Trip Lever

• Proven preferred styling

• 100% factory ush tested

• 5 year warranty

COMPACT CADET® 3

ELONGATED TOILET

VITREOUS CHINA

❑ 3046.016 Elongated Bowl ❑ 4019.016 Tank

Nominal Dimensions: 718 x 438 x 733mm (28-1/4" x 17-1/4" x 28-7/8")

Fixture only, seat and supply by others

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power Supplementary Purchase Specication for Non-Adjustability

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Seat: #5325.010 Elongated Champion® Slow Close

solid plastic seat and cover with easy lift off feature ❏ Seat: #5284.016 Elongated EverClean® solid plastic

seat and cover

❏ Seat: #5321.110 EverClean® Elongated Seat with

Slow Close Snap-Off Hinges

❏ Supply with stop:

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.

SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of xtures are nominal and may var y within the range of tolerance established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K73

Revised 2/08

K74

Revised 2/08