Page 1
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
INSTALL WITH SEAT AT HEAD END.
BARRIER FREE
CAMBRIDGE™ 5’ WHIRLPOOL AND
BATHING POOL
❏ 2461.028W Whirlpool Featuring System I
Right Hand Drain Outlet
❏ 2460.028W Whirlpool Featuring System I
Left Hand Drain Outlet
• Americast® brand engineered material
• Acid-resistant porcelain nish
• Integral apron with integral 3-sided tile/water
retention ange
• Integral lumbar support with beveled headrest
• Full slip-resistant coverage
• 1.6 HP single speed, self-draining pump/motor
• Factory installed power cord and plug
• Six multi-directional and ow-adjustable jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
Whirlpool featuring System I
❏ 2461.128W Whirlpool Featuring System I
Right Hand Drain Outlet with Grab Bar Drilling
❏ 2460.128W Whirlpool Featuring System I
Left Hand Drain Outlet with Grab Bar Drilling
• Same as above except with grab bar drilling
(grab bar must be ordered separately)
EverClean®
Whirlpool featuring System I
❏ 2461.028WC Whirlpool Featuring System I
Right Hand Drain Outlet
❏ 2460.028WC Whirlpool Featuring System I
Left Hand Drain Outlet
• Same as 2460/2461.028W except with the
EverClean® System
CAMBRIDGE™ 5'
WHIRLPOOL AND BATHING POOL
AMERICAST® BRAND ENGINEERED MATERIAL
Bathing Pool:
❏ 2461.002 Bathing Pool Right Hand Drain Outlet
❏ 2460.002 Bathing Pool Left Hand Drain Outlet
Bathing Pool with Grab Bar Drilling:
❏ 2461.102 Bathing Pool Right Hand Drain Outlet
❏ 2460.102 Bathing Pool Left Hand Drain Outlet
Nominal Dimensions:
1524 x 813 x 451mm (60" x 32" x 17-3/4")
Bathing Well Dimensions:
1372 x 660 x 432mm (54" x 26" x 17")
Americast® brand engineered material is a composition of porcelain bonded to
enameling grade metal, bonded to a patented structural composite.
EverClean Whirlpool featuring
System I and Grab Bar Drilling
❏ 2461.128WC Whirlpool Featuring System I
Right Hand Drain Outlet with Grab Bar Drilling
❏ 2460.128WC Whirlpool Featuring System I
Left Hand Drain Outlet with Grab Bar Drilling
• Same as 2460/2461.028W except with the
EverClean whirlpool system and grab bar
drilling (grab bar must be ordered separately)
Compliance Certications Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ASME A112.19.4M for Americast Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
© 2008 AS America Inc.
To Be Specied - Required:
❏ Color:
❏ Bath Filler: (specify nish)
❏ Bath Drain: 1583.470 (specify nish)
To Be Specied - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Jet Trim Ring Kit: 9860.200-one per kit (specify color)
for Body Massage Jets only
❏ Universal Tile Bead Kit: 751755-100
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
H109
Revised 2/08
Page 2
BARRIER FREE
NOTES:
1-1 /2 N.P .T. TH READS
1-1 /2 O.D . TAIL PIECE
441 mm
(17 -3/8)
70m m
(2- 3/4)
117 mm
(4- 5/8)
ROU GH
FLO OR
102 mm
(4)
451mm
(17-3/4)
24m m
(15 /16)
406mm
(16)
OPTIONAL
TO FLOOR
USUALLY
BETWEEN
1651 & 1981mm
(65 & 78)
711 mm
(28 )
C/L OF CURTAIN ROD
USUALLY 1930mm(76) FROM
FINISHED FLOOR
C/L OF
VALVES
102 mm
(4)
102 mm
(4)
SPOUT1/2 N.P.T.
FINISHED
WALL
SHOWER ARM- 1/2 N.P.T.
32mm(1-1/4) DIA. HOLE
SEE
NOTE
76m m
(3)
813 mm
(32 )
152 4mm
(60 )
19m m
(3/ 4)
70mm
(2-3/4)
203mm
(8)
FINISHED
WALL
102 mm
(4)
102 mm
(4)
C/L OF 1/2
SUPPLIES
AS REQ'D
C/L OF
DRAIN
229mm x 305mm
(9 x 12)
FLOOR
CUTOUT
PUMP
406 mm
(16 )
PROVIDE ACCESS TO PUMP FOR
SERVICING ON ALL INSTALLATIONS
ON / OFF
SWITCH
64m m
(2- 1/2)
25m m
(1)
(2) 54mm(2-1/8)
DIA. HOLES
60m m 13m m
+
(2- 3/8) (1/ 2)
+
SAF E-T-HE ATER
REM OVABLE BLANK
GENERAL SPECIFICATIONS FOR 2460/2461 WHIRLPOOL
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP 1.6 HP, 9.7 AMPS,120V.
60 x 32 x 1 7-3 /4 In . (1524 x 813 x 451mm)
190 Lbs. (86 Kg.)
607 Lbs. (273 Kg.)
50 Gal. (190 L)
39 Gal. (148 L)
41 x 20 In. (1041 x 508mm)
54 x 26 In. (1372 x 660mm)
14 In. (356mm)
46 Lbs./Sq.Ft. (220 Kgs./Sq.m)
13.9
30.9
INSTAL LED SI ZE
WEIGHT
WEIGHT w/WAT ER
GAL. T O OVER FLOW
WHIRLP OOL MI N. OPE RATING VOL.
BATHIN G WELL AT SU MP
BATHIN G WELL AT RI M
WATER DEPTH TO OVE RFLOW
FLOOR LOADIN G
(PROJE CTED A REA)
PTS.
CUBE ( FT3)
C/L OF 1/2
SUPPLIES
AS REQ'D
(2) 54mm(2-1/8)
DIA. HOLES
60m m 13 mm
+
(2- 3/8) (1 /2)
+
1-1 /2 N.P .T. T HREADS
1-1 /2 O.D . TAI LPIECE
441 mm
(17 -3/8)
70m m
(2- 3/4)
117 mm
(4- 5/8)
ROU GH
FLO OR
102 mm
(4)
451mm
(17-3/4)
24m m
(15 /16)
406mm
(16)
OPTIONAL
TO FLOOR
USUALLY
BETWEEN
1651 & 1981mm
(65 & 78)
711 mm
(28 )
C/L OF CURTAIN ROD
USUALLY 1930mm(76) FROM
FINISHED FLOOR
C/L OF
VALVES
102 mm
(4)
102 mm
(4)
SPOUT1/2 N.P.T.
FINISHED
WALL
SHOWER ARM- 1/2 N.P.T.
32mm(1-1/4) DIA. HOLE
SEE
NOTE
76m m
(3)
813 mm
(32 )
152 4mm
(60 )
19m m
(3/ 4)
70mm
(2-3/4)
203mm
(8)
FINISHED
WALL
102 mm
(4)
102 mm
(4)
C/L OF
DRAIN
229mm x 305mm
(9 x 12)
FLOOR
CUTOUT
406 mm
(16 )
64m m
(2- 1/2)
25m m
(1)
GENERAL SPECIFICATIONS FOR 2460/2461 BATHING POOL
60 x 3 2 x 17- 3/ 4 In. ( 1524 x 813 x 451mm)
161 Lbs. (72 Kg.)
578 Lbs. (260 Kg.)
50 Gal. (190 L)
41 x 20 In. (1041 x 508mm)
54 x 26 In. (1372 x 660mm)
14 In. (356mm)
43 Lbs./Sq.Ft. (208 Kgs./Sq.m)
13.9
30.9
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED
WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
SHOWN WITH 8 620. SERIES AMARILIS BATH/SHOWER
FITTING AND POP-UP C.D. & O.
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE
DIMENSIONS (2461).
CONCEALED PIPING NOT FURNISHED.
FITTINGS NOT INCLUDED AND MUST BE
ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL
WALL SUPPORTS.
CAMBRIDGE™ 5'
WHIRLPOOL AND BATHING POOL
AMERICAST® BRAND ENGINEERED MATERIAL
© 2008 AS America Inc.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.4
These measurements are subject to c hange or cancellation.
No responsibility is assumed for use of superseded or voided leaet.
American Standard whirlpools and air baths with
EverClean® incorporate a patented silver-ion
additive right into the circulation piping to protect
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
H110
Revised 2/08
Loading...