American Standard IA-LHO, 2425LC-LHO, 2425L-RHO, IA-RHO, 2425L-LHO User Manual

...

LIFETIME™ 5’ X 32”IA-LHO / RHO

Comfortable bathing design with form-tted backrest and molded-in armrests

❏ Model# 2425L-LHO Built-In Integral Apron

Left Hand Drain Outlet (specify color)

❏ Model# 2425L-RHO Built-In Integral Apron

Right Hand Drain Outlet (specify color)

• Acrylic with berglass reinforcement

• Lifetime Overow Drain for maximum water depth

• Integral apron with removable access panel

• Integral three-sided, tiling / water retention ange

• 1.4 HP self-draining pump/motor with dry run seal

• Eight ow adjustable jets including: Two adjustable Ideal Flow Comfort Jets™ Six adjustable Comfort Jets™

• Two silent air volume controls

• Side-mounted On/Off control

• Designed with undermount installation option

• Complete factory installed and tested whirlpool system

LIFETIME™ 5' X 32" IA-LHO/RHO

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

❏ Model# 2425LC-LHO Built-In Integral Apron

Left Hand Drain Outlet (specify color)

❏ Model# 2425LC-RHO Built-In Integral Apron

Right Hand Drain Outlet (specify color)

• Same as above with the EverClean™ whirlpool system. The EverClean™ antimicrobial system incorporates AlphaSan®, a patented antimicrobial agent manufactured right into the circulation system components, which suppresses the growth of unsightly algae, fungus, mold and mildew.

Nominal Dimensions: 60” x 32” x 21-1/2” (1524 x 813 x 546mm)

Compliance Certications Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

Components Required:

❏ Bath Filler*: (specify nish) ❏ Bath Drain: 1599.205.XXX (specify color)

OR 1599.500.020 (white only)

Custom Accessories Available:

❏ E-Z-Install™ Whirlpool Heater - EZHEAT-100

* See American Standard Faucet Selector

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND PRODUCT SPECIFICATIONS

AlphaSan® is a registered trademark of Milliken & Co.

HD-7

Revised 7/07

CUT OUT IN FLOOR

FOR DRAIN

60"

(1524mm)

32"

(813mm)

7-1/2"

(191mm)

10-1/2"

(267mm)

(76mm)

(152mm)

13-1/2"

(343mm)

32"

(813mm)

16"

(406mm)

21-1/2"

(546mm)

20-1/2"(H)

(521mm)

19-1/8"(A)

(486mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

C/L OF OVERFLOW

GENERAL SPECIFICATIONS FOR 2425L WHIRLPOOL

WHIRLPOOL ELECTRICAL SPECIFICATIONS

PUMP 1.4 HP, 9.7 AMPS,120V.

60 x 32 x 20-1/2 (1524 x 813 x 521mm)

92 Lbs. (42 Kg.)

675 Lbs. (306 Kg.)

70 Gal. (265 L.)

39 Gal. (148 L.)

42 x 22 (1067 x 559mm)

53 x 25-1/2 (1346 x 648mm)

17-1/2 (445mm)

51 Lbs./Sq.Ft. (247 Kgs./Sq.m)

INSTAL LED SIZE WEIGHT WEIGHT w/WATER GAL. T O OVERFLOW WHIRLP OOL MIN. OPERATING VOL. BATHIN G WELL AT SUMP BATHIN G WELL AT RIM WATER DEPTH TO OVERFLOW FLOOR LOADING (PROJE CTED AREA)

Model 2425L-LHO Shown

LIFETIME™ 5' X 32" IA-LHO/RHO

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA T YPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibilit y is assumed for use of superseded or voided leaet.

HD-8

Revised 7/07