American Fibertek MTX-50-FX-ST, RRX-50-FX-ST, RX-50-FX-ST Specsheet
10/100 Base-T to 100 Base-FX Ethernet
Media Converter / 4 Port Switch
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
Auto Negotiate 10/100 Ports
Auto MDI/MDIX Detection
Link and Activity Indicators for UTP
and Fiber Ports
Singlemode and Multimode Fiber
Versions Available
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated..........10/100 Mb/s
Connector.................................RJ45
PoE (2 RJ45 ports)...............802.3af
Optical:
One Fiber...................1310/1550 nm
Two Fiber............................1310 nm
Source:
Multimode Two Fiber .............LED
Multimode One Fiber............Laser
Distance
FX 62/125u............................2 km
Loss Budget ...........................11 dB
Connector............................. SC, ST
Power:
Voltage ................................ 48 VDC
Current................................ 200 mA
Connector........2 Pin Terminal Block
Power Supply:
Module: 48VDC, 60W
(AFI Part #: PS-48V-60W)
Environmental:
Temperature...........-40 °C to +75 °C
Humidity.........................5 % to 95 %
Size:
Rack Card One Slot…….....6½” x 1” x 5”
ORDERING INFORMATION:
RX-50-FX-AA Two Fiber Rackcard Rx FX
RRX-50-FX-AA One Fiber Rackcard Rx FX
Replace AA with ST or SC to specify the desired
optical connector
8/11/11
The American Fibertek RX-50 Series transmits and receives (2) copper
10/100 Base-T Ethernet signals at the RJ45 ports and (2) optical 100 BaseFX at the fiber ports. Both single fiber and dual fiber
versions of the optics are available.
A single rackcard unit is capable of connecting up to (2) Series MX/MTX-50
(on a separate datasheet) modules which provides the benefit of reducing the
number of rackcards and corresponding subrack space and power supplies.
The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed (10/100
Base-T). Auto MDI/MDIX operation eliminates the potential need for
crossover cables. Diagnostic indicators provide a quick visual indication of
system status.
Equipment may be ordered as stand alone modules or rack cards that are
mounted in the American Fibertek Card Cage: SR-20/2
MX-48
Series
MX-46
Series
MX-46
Series
Fibers
RX-50
Series
RX-50
SERIES
MULTIMODE
Loading...