American Dynamics ADCC0200P, ADCC0300P Installation
ControlCenter
TM
ADCC0200
ADCC0300
Keyboard Installation and Operation Instructions
ADCC0200 and ADCC0300
Notice
The information in this manual was current when published. The manufacturer reserves the right to
revise and improve its products. All specifications are therefore subject to change without notice.
Copyright
Under copyright laws, the contents of this manual may not be copied, photocopied, reproduced,
translated or reduced to any electronic medium or machine-readable form, in whole or in part,
without prior written consent of American Dynamics Video Products Division.
© Copyright 2004
American Dynamics Video Products Division
6795 Flanders Drive San Diego, CA 92121 U.S.A.
Trademarks
MegaPower™ and ControlCenter™ are trademarks of American Dynamics Video Products Division.
Trademarked names are used throughout this manual. Rather than place a symbol at each occurrence, trademarked names are designated with initial capitalization. Inclusion or exclusion is not a
judgment on the validity or legal status of the term.
Important Information
Before proceeding, please read and observe all instructions and warnings contained in this manual.
Retain this manual with the original bill of sale for future reference and, if necessary, warranty
service.
When unpacking your new American Dynamics product, check for missing or damaged items. If
any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT.
Contact your dealer for assistance.
NOTE
This product is supplied with a printed English manual. The manual is also provided in other
languages (French, Spanish, German) on the included CD.
For your Records
Complete the following product purchase information. The factory requests this information when
contacted for technical support. It is also valuable in case of loss or theft.
Purchase Date: __________________________
Serial Number: __________________________
ii
Keyboard Installation and Operation
TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
DO NOT INSTALL THIS PRODUCT IN HAZARDOUS AREAS WHERE HIGHLY COMBUSTIBLE
OR EXPLOSIVE PRODUCTS ARE STORED OR USED.
THE EQUIPMENT SUPPLIED WITH THIS MANUAL IS DESIGNED FOR USE IN A GENERAL PURPOSE CCTV INSTALLATION AND HAS NO OTHER FUNCTION. DO NOT EXCEED THE VOLTAGE AND TEMPERATURE LIMITS GIVEN IN THE SPECIFICATIONS. ONLY USE YOUR KEYBOARD IN A CLEAN, DRY, DUST-FREE ENVIRONMENT.
BEFORE CLEANING, ISOLATE THE UNIT. USE ONLY A DRY, LINT-FREE CLOTH. DO NOT USE
CLEANING FLUIDS OR SOLVENTS.
THE LIGHTNING FLASH/ARROWHEAD SYMBOL, WITHIN AN EQUILA TERAL TRIANGLE, ALERTS
THE USER TO THE PRESENCE OF A SHOCK HAZARD WITHIN THE PRODUCT’S ENCLOSURE.
CAUTION: This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Radio Frequency Emissions
Federal Communications Commission Code of federal regulations Part 15.
British Standard BSEN55022:1998 Limits and methods of measurement of radio disturbance characteristics of
information technology equipment.
Electrical Safety
British Standard BSEN60950:1999 Safety of information technology equipment, including electrical business
equipment.
Immunity
British Standard BSEN50130-4 Alarm Systems Part 4 Electromagnetic compatibility Product family standard:
Immunity requirements for components of fire, intruder and social alarm systems.
EU Conformance Statement
A Declaration of Conformity in accordance with the above EU standards has been made and is on file with the
manufacturer.
The manufacturer declares that the product supplied with this document is complaint with the provisions of the
EMC Directive 89/336 EEC and associated amendments and the Low Voltage Directive LVD 73/23 EEC.
Regulatory Notices
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
iii
ADCC0200 and ADCC0300
PPOUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE PAS DÉPOSER LE COUVERCLE.
AUCUN COMPOSANT NE PEUT ÊTRE RÉPARÉ PAR L’UTILISATEUR. FAIRE APPEL À UN
TECHNICIEN DE MAINTENANCE COMPÉTENT.
POUR PRÉVENIR TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER
CETTE UNITÉ À LA PLUIE NI À L’HUMIDITÉ.
NE PAS INSTALLER CET APPAREIL DANS UN ENDROIT DANGEREUX OÙ DES PRODUITS
HAUTEMENT INFLAMMABLES OU EXPLOSIFS SONT STOCKÉS ET UTILISÉS.
L’ÉQUIPEMENT FOURNI AVEC LE PRÉSENT MANUEL EST CONÇU POUR ÊTRE UTILISÉ
DANS LE CADRE GÉNÉRAL DE LA SURVEILLANCE PAR CAMÉRA À CIRCUIT FERMÉ (CCTV)
ET N’A AUCUNE AUTRE FONCTION. NE PAS DÉPASSER LES SEUILS DE TENSION ET DE
TEMPÉRATURE INDIQUÉS DANS LES CARACTÉRISTIQUES TECHNIQUES. N’UTILISER
L’UNITÉ MATRIX QU’EN ENVIRONNEMENT PROPRE, SEC ET EXEMPT DE POUSSIÈRE.
AVANT DE LE NETTOYER, IL DOIT ÊTRE ISOLÉ. UTILISER UNIQUEMENT UN CHIFFON
SEC ET NON PELUCHEUX. NE PAS UTILISER DE PRODUITS DE NETTOYAGE NI DE
DISSOLVANTS.
LE SYMBOLE EN FORME D’ÉCLAIR/TÊTE DE FLÈCHE DANS UN TRIANGLE ÉQUILATERAL
SIGNALE LA POSSIBILITÉ D’UN RISQUE D’ÉLECTROCUTION À L’INTÉRIEUR DU BOÎTIER
DU PRODUIT.
ATTENTION: il s’agit d’un produit de classe A. Dans un environnement domestique, ce produit est susceptible
de provoquer des interférences radio, auquel cas l’utilisateur devra éventuellement prendre des mesures
appropriées.
Émission de fréquences radio
Paragraphe 15 du code des réglementations fédérales de la FCC (Federal Communications Commission).
Norme britannique BSEN55022:1998: limites et méthodes de mesure des caractéristiques de perturbation
radio des équipements informatiques.
Sécurité électrique
Norme britannique BSEN60950:2001 : sécurité des équipements informatiques, notamment les équipements
électriques commerciaux.
Immunité
Norme britannique BSEN50130-4 : systèmes d’alarme, 4e partie, compatibilité électromagnétique Norme de
famille de produits : caractéristiques d’immunité des composants des systèmes anti-incendie, anti-intrusion et
d’alarme sociaux.
Déclaration de conformité UE
Une déclaration de conformité aux normes ci-dessus de l’Union Européenne a été réalisée et est conservée
chez le constructeur.
Le constructeur déclare le produit accompagnant ce document conforme aux dispositions de la Directive 89/
336 de la CEE et ses modifications sur la compatibilité électromagnétique et de la directive LVD 73/23 de la
CEE sur les basses tensions.
Avis réglementaires
Cet équipement est conforme au paragraphe 15 des réglementations de la FCC. Son utilisation est sujette aux
deux conditions suivantes : (1) cet équipement ne doit pas générer d’interférences nuisibles et (2) cet équipement
doit accepter les interférences éventuelles, notamment les interférences susceptibles de provoquer un
fonctionnement indésirable.
iv
Keyboard Installation and Operation
UM STROMSCHLÄGE ZU VERMEIDEN, DARF DIE ABDECKUNG NICHT ENTFERNT WERDEN.
DAS GERÄT ENTHÄLT KEINE DURCH DEN ANWENDER WARTBAREN TEILE.
WARTUNGSARBEITEN DÜRFEN NUR VON QUALIFIZIERTEM WARTUNGSPERSONAL
DURCHGEFÜHRT WERDEN.
DIESES GERÄT DARF KEINER FEUCHTIGKEIT ODER REGEN AUSGESETZT WERDEN.
DIESES PRODUKT DARF NICHT IN GEF AHRENBEREICHEN INST ALLIERT WERDEN, IN DENEN
LEICHT ENTFLAMMBARE ODER EXPLOSIVE PRODUKTE GELAGERT ODER VERWENDET
WERDEN.
DIE ZUSAMMEN MIT DIESEN ANLEITUNGEN GELIEFERTE AUSRÜSTUNG IST FÜR DEN
EINSATZ IN ALLGEMEINEN CCTV -ANWENDUNGEN KONZIPIERT UND DIENT KEINEM ANDEREN
ZWECK. DIE IN DEN TECHNISCHEN DATEN ANGEGEBENEN SPANNUNGS- UND
TEMPERATURGRENZEN DÜRFEN NICHT ÜBERSCHRITTEN WERDEN. VER WENDEN SIE IHR
KEYBOARD NUR IN EINER SAUBEREN, STAUBFREIEN UMGEBUNG.
DAS GERÄT MUSS VOR DER REINIGUNG VON DER VERKABELUNG GETRENNT WERDEN.
VERWENDEN SIE NUR EIN TROCKENES, FLUSENFREIES TUCH. VERWENDEN SIE KEINE
REINIGUNGSFLÜSSIGKEITEN ODER LÖSUNGSMITTEL.
DAS BLITZ-/PFEIL-SYMBOL IN EINEM GLEICHSEITIGEN DREIECK VERWEIST DEN BENUTZER
AUF EINE STROMSCHLAGGEFAHR IM INNEREN DES GEHÄUSES.
VORSICHT: Dies ist ein Produkt der Klasse A. Es kann in Wohnbereichen Funkstörungen verursachen, in welchem
Fall das Ergreifen entsprechender Maßnahmen durch den Benutzer erforderlich sein könnte.
Funkfrequenzemissionen
Bundesbehördliche Richtlinien gemäß Federal Communications Commission Code Part 15.
British Standard BSEN55022:1998 – Messgrenzen und -verfahren für Funkstörungscharakteristiken von
informationstechnischer Ausrüstung.
Elektrische Sicherheit
British Standard BSEN60950:1999 – Sicherheit von informationstechnischer Ausrüstung, einschließlich elektrischer
Geschäftsausrüstung.
Immunität
British Standard BSEN50130-4 – Alarmsysteme, Teil 4, elektromagnetischer Kompatibilitätsstandard für die
Produktgruppe: Immunitätsanforderungen für Komponenten von Feuer-, Einbruchs- und öffentlichen
Alarmsystemen.
EU-Konformitätserklärung
Eine Konformitätserklärung gemäß der o. g. EU-Standards ist erfolgt und liegt beim Hersteller vor.
Der Hersteller erklärt, dass das mit diesem Dokument gelieferte Produkt die Anforderungen der EMC-Direktive
89/336 EEC und aller diesbezüglichen Änderungen sowie der Direktive für Niederspannung LVD 73/23 EEC
erfüllt.
Aufsichtsbehördliche Hinweise
Dieses Gerät entspricht T eil 15 der FCC-Richtlinien. Der Betrieb ist vorbehaltlich der beiden folgenden Bedingungen
gestattet: (1) dieses Gerät darf keine schädlichen Störungen verursachen, und (2) dieses Gerät muss alle S törungen
akzeptieren, einschließlich solcher, die den Betrieb beeinträchtigen könnten.
v
ADCC0200 and ADCC0300
PER RIDURRE IL RISCHIO DI SHOCK ELETTRICI, NON RIMUOVERE IL COPERCHIO. L ’INTERNO
NON CONTIENE PARTI CHE L’UTENTE POSSA RIPARARE. RIVOLGERSI A TECNICI DI
ASSISTENZA QUALIFICATI.
PER EVITARE IL RISCHIO DI INCENDI O SHOCK, NON ESPORRE L’APPARECCHIO ALLA
PIOGGIA O ALL’UMIDITÀ.
NON INSTALLARE IL PRODOTTO IN AREE A RISCHIO, NELLE QUALI SONO IMMAGAZZINA TI O
UTILIZZATI MATERIALI ALTAMENTE INFIAMMABILI O ESPLOSIVI.
L’APPARECCHIO CUI QUESTO MANUALE SI RIFERISCE È DESTINATO ALL’USO IN
INSTALLAZIONI GENERICHE PER TV A CIRCUITO CHIUSO E NON HA ALCUNA ALTRA
FUNZIONE. NON SUPERARE I LIMITI DI VOLTAGGIO E TEMPERATURA INDICATI NELLE
SPECIFICHE. USARE L’APPARECCHIO ESCLUSIVAMENTE IN AMBIENTI PULITI, NON UMIDI E
NON POLVEROSI.
PRIMA DI PROCEDERE ALLA PULIZIA DELL’APPARECCHIATURA, ISOLARE L’UNITÀ.
UTILIZZARE UN P ANNO ASCIUTTO E NON SFILACCIABILE. NON UTILIZZARE DETERGENTI O
SOLVENTI.
IL SEGNALE CHE RAFFIGURA UN LAMPO CON UN'ESTREMITÀ A FORMA DI FRECCIA
ALL'INTERNO DI UN TRIANGOLO EQUILATERO AVVISA DELLA PRESENZA DI UN RISCHIO DI
SHOCK NEL PERIMETRO DEL PRODOTTO.
ATTENZIONE: Si tratta di un prodotto di classe A. In un ambiente domestico il prodotto può causare interferenze
radio nel cui caso potrebbe essere richiesto all’utente di adottare misure adeguate.
Emissioni in radiofrequenza
Regolamento della Federal Communications Commission (FCC) Parte 15.
Standard britannico BSEN55022:1998 per i limiti e i metodi di misurazione delle interferenze radio caratteristiche
delle apparecchiature informatiche.
Sicurezza elettrica
Standard britannico BSEN60950:1999 per la sicurezza delle apparecchiature informatiche, incluse le
apparecchiature elettriche aziendali.
Immunità
Standard britannico BSEN50130-4 per i sistemi di allarme, parte 4, standard di compatibilità elettromagnetica
per la tipologia di prodotti: requisiti di immunità per sistemi di allarme antincendio, anti-intrusione e di tipo
sociale.
Dichiarazione di conformità UE
In base agli standard UE summenzionati, è stata emessa una Dichiarazione di conformità che è archiviata
nella sede del produttore.
Il produttore dichiara che l’apparecchiatura fornita è conforme a quanto previsto dalla direttiva sulla compatibilità
elettromagnetica 89/336 CEE, e da tutte le successive modifiche, dalla direttiva sulle apparecchiature a basso
voltaggio 73/23 CEE.
Regolamenti
Questo dispositivo è conforme alla parte 15 dei regolamenti FCC. Il suo funzionamento è soggetto alle due
condizioni indicate di seguito: (1) il dispositivo non deve causare interferenze pericolose; (2) il dispositivo deve
essere in grado di funzionare anche in presenza di interferenze che possono causare un funzionamento anomalo.
vi
Keyboard Installation and Operation
CON EL FIN DE REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA, ABSTÉNGASE DE RETIRAR
LA CUBIERTA, YA QUE EN SU INTERIOR NO HAY NINGÚN COMPONENTE QUE PUEDA SER
REPARADO POR EL USUARIO. EN EL CASO DE QUE SEA NECESARIO, ACUDA A PERSONAL
DE SERVICIO CUALIFICADO PARA QUE REALICE LA REPARACIÓN.
NO EXPONGA ESTE DISPOSITIVO A LA LLUVIA O LA HUMEDAD.
NO INSTALE ESTE PRODUCT O EN ÁREAS PELIGROSAS EN LAS QUE HAYA ALMACENADAS
O SE UTILICEN PRODUCTOS ALTAMENTE INFLAMABLES O EXPLOSIVOS.
EL EQUIPO SUMINISTRADO CON ESTE MANUAL ESTÁ DISEÑADO PARA SU UTILIZACIÓN
EN UNA INSTALACIÓN DE CIRCUITO CERRADO DE TELEVISIÓN (CCTV) Y NO TIENE
NINGUNA OTRA FUNCIÓN. NO SUPERE LOS LÍMITES DE TENSIÓN Y TEMPERATURA
INDICADOS EN LAS ESPECIFICACIONES. UTILICE EL TECLADO MP100CC EXCLUSIV AMENTE
EN UN ENTORNO LIMPIO, SECO Y LIBRE DE POLVO.
ANTES DE LIMPIARLO, AÍSLE LA UNIDAD. UTILICE UN PAÑO SECO Y SIN PELUSAS. NO
UTILICE LÍQUIDOS LIMPIADORES NI DISOLVENTES.
EL SÍMBOLO DE RAYO/PUNTA DE FLECHA RODEADO POR UN TRIÁNGULO EQUILÁTERO
AVISA AL USUARIO DE LA EXISTENCIA DE PELIGRO DE ELECTROCUCIÓN EN EL INTERIOR
DE LA CARCASA DEL PRODUCTO.
PRECAUCIÓN: Este es un producto de Clase A. En entornos domésticos, este producto puede provocar
interferencias de radio, en cuyo caso es posible que el usuario deba adoptar las medidas correctoras oportunas.
Emisión de radiofrecuencia
Parte 15 del Código normativo federal de la Comisión Federal de comunicaciones (Federal Communications
Commission, EE UU).
British Standard BSEN55022:1998 Límites y métodos de medición de características de interferencias de
radio para equipos informáticos.
Seguridad eléctrica
British Standard BSEN60950:1999 Seguridad de equipos informáticos, incluidos equipos eléctricos de uso
empresarial.
Inmunidad
British Standard BSEN50130-4, Parte 4 de sistemas de alarma (Alarm Systems), estándar de compatibilidad
electromagnética para familia de productos: Requisitos de inmunidad para componentes de sistemas de alarma
antiincendios, contra intrusión y sociales.
Declaración de conformidad de la UE
Se ha realizado la Declaración de conformidad en cumplimiento de las normas de la UE indicadas más arriba.
El fabricante es el depositario de dicha declaración.
El fabricante declara que el producto suministrado con esta documentación cumple las normas estipuladas
por la Directiva sobre EMC 89/336 CEE y sus correspondientes enmiendas y la Directiva sobre baja tensión
LVD 73/23 CEE.
Avisos sobre cumplimiento de la legislación
Este dispositivo cumple la parte 15 de las normas de la FCC. Su utilización está sujeta a las siguientes dos
condiciones: (1) Este equipo no puede provocar interferencias nocivas, y (2) este equipo debe aceptar cualquier
interferencia recibida, incluidas las interferencias que puedan provocar un funcionamiento no deseado.
vii
ADCC0200 and ADCC0300
OM DE KANS OP ELEKTRISCHE SCHOKKEN TE VERMIJDEN, DIENT U DE KAP NIET TE
VERWIJDEREN. HET APPARAAT BEVAT GEEN ONDERDELEN DIE DOOR DE GEBRUIKER
KUNNEN WORDEN GEREPAREERD. LAAT ONDERHOUD UITVOEREN DOOR
GEKWALIFICEERD ONDERHOUDSPERSONEEL.
OM DE KANS OP BRAND OF ELEKTRISCHE SCHOKKEN TE VERMIJDEN, DIENT U DIT
APPARAAT NIET AAN REGEN OF VOCHT BLOOT TE STELLEN.
INSTALLEER DIT PRODUCT NIET IN GEVAARLIJKE OMGEVINGEN WAAR ONTBRANDINGSOF ONTPLOFFINGSGEVOELIGE STOFFEN STAAN OPGESLAGEN OF WORDEN GEBRUIKT.
DE BIJ DEZE HANDLEIDING GELEVERDE APPARATUUR IS ONTWORPEN VOOR GEBRUIK
IN ALGEMENE CCTV-INSTALLATIES EN HEEFT VERDER GEEN ANDERE FUNCTIE. STEL DE
APP ARATUUR NIET BLOOT AAN VOL TAGES EN TEMPERATUREN BOVEN DE AANGEGEVEN
LIMIET. GEBRUIK UW MATRIX ALLEEN IN EEN SCHONE, DROGE, STOFVRIJE OMGEVING.
ISOLEER HET APPARAAT VOORDAT U SCHOONMAAKWERKZAAMHEDEN UITVOERT.
GEBRUIK DAARVOOR ALLEEN EEN DROGE, VILTVRIJE DOEK. GEBRUIK GEEN VLOEIBARE
SCHOONMAAKMIDDELEN OF OPLOSMIDDELEN.
HET BLIKSEMSCHICHTSYMBOOL IN DE GELIJKZIJDIGE DRIEHOEK ATTENDEERT DE
GEBRUIKER OP DE KANS OP ELEKTRISCHE SCHOKKEN BINNEN DE BESCHERMENDE KAST .
LET OP: Dit is een A-klasse product. In woonomgevingen kan dit product tot radiostoring leiden en dient de
gebruiker passende maatregelen te nemen.
Radiofrequentie-emissie
Federale voorschriften van de Federale communicatiecommisie (Federal Communications Commission Code of
federal regulations), deel 15.
BSEN55022:1998 Limieten en methoden van meting van radiostoringskenmerken van IT-apparatuur.
Elektrische veiligheid
Britse norm BSEN60950:2000, veiligheid van IT-apparatuur, waaronder zakelijke elektrische apparatuur.
Immuniteit
Britse norm BSEN 50130-4 Alarmsystemen, deel 4, Elektromagnetische compatibiliteit. Productfamilienorm:
immuniteitseisen die worden gesteld aan onderdelen van brand-, inbraak- en persoonlijk-alarmssystemen
Conformiteitsverklaring van de fabrikant
Er bestaat een “conformiteitsverklaring” die conform is met de bovenvermelde EU-normen en de fabrikant
bezit hiervan een exemplaar.
De fabrikant verklaart dat het bij dit document meegeleverde product voldoet aan de voorwaarden van EMCrichtlijn 89/336 EEC en alle aanverwante wijzigingen, Laagspanningsrichtlijn LVD 73/23 EEC.
Gebruiksvoorschriften
Dit apparaat voldoet aan deel 15 van de FCC-regelgeving. Gebruik is onderhevig aan de twee onderstaande
bepalingen: (1) het apparaat mag geen schadelijke storingen veroorzaken, en (2) het apparaat dient bestand te
zijn tegen schadelijke storingen die tot onjuiste werking leiden.
viii
Keyboard Installation and Operation
CHAPTER 1: ABOUT THE ADCC0200 AND ADCC0300 KEYBOARD ..................................................3
Key Features .......................................................................................................................................3
ADCC0200 and ADCC0300 Keyboard Overview................................................................................4
Feature Quick Reference ....................................................................................................................7
CHAPTER 2: CONNECTION AND SETUP............................................................................................ 11
Ancillary Equipment........................................................................................................................... 11
MP-KMI Keyboard Matrix Interface ..............................................................................................11
Installation Precautions .....................................................................................................................12
Connections for Cable Distance of Greater than Seven Feet (RS232 Mode) .............................12
Connections for Cable Distance of Seven Feet or Less (RS232 Mode)......................................1 3
Multiple Keyboards on an RS485 Network ..................................................................................14
Terminating/Biasing the RS485 Network .....................................................................................14
Multiple Keyboards on an RS232 Network ..................................................................................15
CHAPTER 3: BASIC OPERATIONS - OPERATE MODE (ADCC0200 AND ADCC0300) ....................16
User Numbers and Passcodes..........................................................................................................16
Logging On to the System .................................................................................................................16
Logging Off from the System.............................................................................................................16
Keyboard Display ..............................................................................................................................17
Selecting Monitors .............................................................................................................................17
Calling a Camera to View on a Monitor .............................................................................................17
Controlling a Camera’s Pan, Tilt and Zoom ......................................................................................18
Controlling Camera Focus.................................................................................................................19
Controlling the Camera Iris................................................................................................................19
Controlling Camera Flip.....................................................................................................................19
Auto Iris .............................................................................................................................................19
Auto Focus ........................................................................................................................................20
Calling Presets ................................................................................................................ ..................20
Running Patterns...............................................................................................................................21
Dome Camera DirectSet ...................................................................................................................21
Running Tours ...................................................................................................................................22
Holding a Tour ..............................................................................................................................22
Restarting a Tour on Hold ............................................................................................................22
Stepping through a Tour ...............................................................................................................22
Reversing a Tour ..........................................................................................................................23
Stopping a Tour ............................................................................................................................23
Calling Salvos (RS232 only)..............................................................................................................23
Calling Views (RS485 only) ...............................................................................................................24
Acknowledging Alarms ......................................................................................................................24
Auxiliaries ..........................................................................................................................................24
Setting the Keyboard Display Contrast .............................................................................................25
Enabling or Disabling the Keyboard Sounder ...................................................................................25
Viewing Satellite Sites .......................................................................................................................25
Operating a VCR or Digital Recorder ................................................................................................26
Cancel VCR/DVR mode...............................................................................................................26
Locking and Unlocking a Camera (RS232 only) ...............................................................................26
Telemetry Enable/Disable (RS485 only)............................................................................................27
Initiating F1 Key Commands (RS232 only) .......................................................................................27
1
ADCC0200 and ADCC0300
CHAPTER 4: PROGRAMMING WITH THE ADCC0200/ADCC0300 KEYBOARDS ............................ 28
Entering Program Mode (RS232 only) ..............................................................................................28
Exiting Program Mode (RS232 only) ................................................................................................. 28
Matrix Menu .......................................................................................................................................29
Dome Menu Functions ...................................................................................................................... 30
Navigating Dome Camera Menus .....................................................................................................30
Setting Presets ..................................................................................................................................31
Programming Dome Patterns............................................................................................................31
Defining Patterns .........................................................................................................................31
Clearing Patterns .........................................................................................................................32
Initiating F2 Key Commands (RS232 only) .......................................................................................32
CHAPTER 5: INST ALLER FUNCTIONS................................................................................................33
Entering the Special Configuration Menu..........................................................................................33
Setting the Keyboard Address...........................................................................................................33
Setting the Number of Keyboard Retries...........................................................................................33
Setting the Network Timeout Period..................................................................................................34
Setting the Baud Rate .......................................................................................................................34
Disabling/Enabling the Sounder ........................................................................................................35
Selecting RS485 or RS232 mode .....................................................................................................35
To Reset the Keyboard to its Factory Defaults ..................................................................................35
Selecting Auto Repeat or Make/Break Keypress Mode ....................................................................35
Setting the Passcode (Program Lock) Function................................................................................36
APPENDIX A: ADCC0200/ADCC0300 VCR REPROGRAMMING ........................................................37
APPENDIX B: MONITOR ARMING COMMANDS .................................................................................39
APPENDIX C: TROUBLESHOOTING ...................................................................................................40
APPENDIX D: SPECIFICATIONS .......................................................................................................... 41
INDEX .....................................................................................................................................................42
2
Keyboard Installation and Operation
Chapter 1: About the ADCC0200 and ADCC0300 Keyboard
This chapter describes the features of the ADCC0200/ADCC0300 keyboard. It also
describes the location and function of the keyboard's front panel components
Key Features
The ADCC0200/ADCC0300 is a video control station that is fully compatible with the
American Dynamics MegaPower family of matrix switchers. The ADCC0200/ADCC0300
enables the user to view and control cameras and video recorders at local and remote
facilities, and to control auxiliary devices such as door locks and lights. Additionally, the
operator can acknowledge alarms with the unit. These operations are accomplished in
the keyboard's Operator mode.
Operators with key privileges can also perform programming functions using the ADCC0300
keyboard. These functions include programming of presets (targets), p atterns, tours, menu
access and dome menu access. These functions are accomplished in Program mode.
A summary listing of the ADCC0200/ADCC0300 features follows:
• user ID Entry - provides passcode logon/logoff capability
• site ID - selects a site for satellite switching
• monitor/camera selection - provides selection for viewing and control
• pan/tilt and lens control - pan and tilt, or pan, tilt, and zoom (ADCC0300 only)
control through joystick positioning. Zoom, focus, and iris adjustments through
lens control keys
• “Flip” push-button - enables user to flip cameras 180º from established position
• tour functions - enables the running and control of camera sequences
• salvo functions - enables the simultaneous call-up of multiple camera scenes
(RS232 mode only)
• view functions - enables the simultaneous call-up of a specific camera and preset
• alarm functions - supports monitor alarm arming, disarming, and alarm
acknowledgment
• pattern and preset functions - enables programming (ADCC0300 only) and
display of patterns and presets
• selectable baud rate - 1200, 4800, 9600, 19,200, 38,400, 57,600 bps
• adjustable display brightness/contrast
• Auto Focus/Auto Iris capability - supported when used with SpeedDome Ultra
units
• Camera Lockout – prevents other users from controlling a camera that the current
user already has under control
• DirectSet feature - allows some dome functions to be quickly accessed
3
ADCC0200 and ADCC0300
ADCC0200 and ADCC0300 Keyboard Overview
The keyboard consists of the following elements:
1. Clear key - clears any numerical data entered during camera, monitor selection
etc. Used to backstep or exit the menu system.
2. Menu key - used to enter the matrix menu system.
3. View key - used to call views.
4. Tour/Sequence key - used to call a sequence.
5. Shift key - when held down, allows multiple use of other keys.
6. Pattern key - used to call patterns.
7. Preset key - used to call and program presets.
8. Unit select key - calls control of the target matrix to the keyboard.
9. Function key - used in conjunction with other keys to modify their action.
10. LCD Display - displays system information, such as the currently selected
monitor or camera.
4
Keyboard Installation and Operation
11. Numeric keypad - keys ranging from 0 to 9 that enable the user to select specific
cameras, monitors, presets, sequences, etc.
12. Monitor key - selects the monitor whose number was entered on the numeric
keypad.
13. Camera key - selects the camera whose number was entered on the numeric
keypad.
14. Alarm acknowledge key - acknowledges/clears an alarm displayed on the
currently active monitor.
15. Focus Near/Focus Far Key - adjusts the lens focus for the selected camera.
16. Open/Close Iris Key - opens or closes the lens iris for the selected camera.
17. Zoom In/Zoom Out Key - zoom in or zoom out with the selected camera.
18. Search key - places a DVR into search mode.
19. Telemetry enable/disable key - allows telemetry control (note, when the joystick
is moved, the keyboard automatically enters telemetry mode).
20. Reverse play key - places a VCR/DVR into reverse play mode.
21. Pause key - places a VCR/DVR into pause.
22. Direct Control key - calls a VCR/DVR to control.
23. Rewind key - places a VCR/DVR into rewind.
24. Fast forward key - places a VCR/DVR into fast forward.
25. Joystick
ADCC0200 2-axis joystick enables the user to pan and tilt, the selected camera.
ADCC0300 3-axis joystick enables the user to pan, tilt and zoom the selected
camera.
26. Enter key - used when in program mode.
27. Record key - places a VCR/DVR into record mode.
28. Stop key - stops playback of a VCR/DVR.
29. Start key - starts playback of a VCR/DVR.
30. Auxiliary 1 key - toggles auxiliary 1 between ON state and OFF state.
31. Auxiliary 3 key - toggles auxiliary 3 between ON state and OFF state.
32. Autopan key - starts autopan function for the selected camera (if function is
available).
5
ADCC0200 and ADCC0300
33. Auxiliary key - toggles auxiliary between ON state and OFF state (if function is
available).
34. Flip key - automatically turns the selected dome through 180O.
35. Auxiliary 2 key - toggles auxiliary 2 between ON state and OFF state.
36. Auxiliary 4 key - In RS485 mode, momentarily switches auxiliary 4 from its OFF
state to its ON state for the period the key is held down. In RS232 mode, toggles
auxiliary 4 between ON state and OFF state.
37. Last/Decrement key - in Tour hold mode, steps backwards through the tour. In
VCR mode, reduces playback or record speed.
38. F1/F2 key - this key is reserved for future use.
39. Next/Increment key - in Tour hold mode, steps forwards through the tour. In VCR
mode, increases playback or record speed.
40. DirectSet key - allows dome features for the Baxall Pro-Dome to be called to the
keyboard.
41. Multiscreen key - toggles the multiple picture display on a multiplexer.
42. Freeze key - electronically freezes the picture on a multiplexer.
43. Print key - this key is reserved for future use.
44. Search key - access the search facility on a multiplexer.
45. Connection port - used to connect power to the ZKX72J/ZKX73J, and data to a
switching system.
46. Termination/Biasing switches - used to terminate and/or bias an RS485
network.network.
6
Keyboard Installation and Operation
Feature Quick Reference
The features that are available depend on the keyboard in use (ADCC0200 or ADCC0300) and the
communication format that is utilized (RS232 or RS485).
Standard Matrix Operations
FEA TURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Select Monitor Monitor number →
Select Camera Camera number →
Select Matrix/Site Site number → AND
Telemetry Enable/Disable
Pan Left/Right Joystick Left/Right
Tilt Up/Down Joystick Up/Down
Zoom In (or Twist Joystick Clockwise)
Zoom Out (or Twist Joystick Anti-CW)
Focus Near
Focus Far
Iris Open
Iris Close
Flip
Engage Auto Iris AND , , or
Engage Auto Focus AND , , or
Select Preset Preset number →
Record Preset → Preset number →
Acknowledge Alarm
Select Sequence Sequence number →
Select View View number → AND
Select Salvo Salvo number → AND
7
ADCC0200 and ADCC0300
Standard Matrix Operations (continued)
FEA TURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Run Tour Tour number →
Hold Tour AND
Restart Current Tour
Last and Next Camera or
(When Tour Held)
F1 Function Function number →
F2 Function
Function number → AND
Matrix Menu Operations
FEA TURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Enter Menu Mode AND
Move Cursor Up Joystick Up
Move Cursor Down Joystick Down
Move Cursor Left Joystick Left
Move Cursor Right Joystick Right
Page Up (if available) AND Joystick Up
Page Down (if available) AND Joystick Down
Page Left (if available) AND Joystick Left
Page Right (if available) AND Joystick Right
Menu Select ENTER key
Menu Escape RS232: AND - -
RS485: - -
8
Keyboard Installation and Operation
Dome Operations
FEA TURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Enter Dome Menu Mode → AND
Exit Dome Menu Mode Via Dome Menu
Scroll Up Dome Menu Joystick Up
Scroll Down Dome Menu Joystick Down
Scroll Left in Dome Menu Joystick Left
Scroll Right in Dome Menu Joystick Right
Cycle Field Options/Values or (or Twist Joystick)
Enter Selection or
Program Pattern → Pattern number →
AND → Move joystick as
required → Pattern number
→
Run Pattern Continuous Pattern number + AND
Aux 1 On/Off
Aux 2 On/Off
Aux 3 On/Off
Aux 4 On/Off Aux 4 Aux 4
Lock/Unlock AND
9
momentary momentary
Loading...